Muutke küpsiste eelistusi

E-raamat: Mechanics of Structures and Materials XXIV: Proceedings of the 24th Australian Conference on the Mechanics of Structures and Materials (ACMSM24, Perth, Australia, 6-9 December 2016)

Edited by (Qingdao University of Technology, P.R. China), Edited by (Department of Civil Engineering, Curtin University, Perth, Australia)
  • Formaat: 1963 pages
  • Ilmumisaeg: 08-Aug-2019
  • Kirjastus: CRC Press
  • Keel: eng
  • ISBN-13: 9781351850209
  • Formaat - EPUB+DRM
  • Hind: 520,00 €*
  • * hind on lõplik, st. muud allahindlused enam ei rakendu
  • Lisa ostukorvi
  • Lisa soovinimekirja
  • See e-raamat on mõeldud ainult isiklikuks kasutamiseks. E-raamatuid ei saa tagastada.
  • Raamatukogudele
  • Formaat: 1963 pages
  • Ilmumisaeg: 08-Aug-2019
  • Kirjastus: CRC Press
  • Keel: eng
  • ISBN-13: 9781351850209

DRM piirangud

  • Kopeerimine (copy/paste):

    ei ole lubatud

  • Printimine:

    ei ole lubatud

  • Kasutamine:

    Digitaalõiguste kaitse (DRM)
    Kirjastus on väljastanud selle e-raamatu krüpteeritud kujul, mis tähendab, et selle lugemiseks peate installeerima spetsiaalse tarkvara. Samuti peate looma endale  Adobe ID Rohkem infot siin. E-raamatut saab lugeda 1 kasutaja ning alla laadida kuni 6'de seadmesse (kõik autoriseeritud sama Adobe ID-ga).

    Vajalik tarkvara
    Mobiilsetes seadmetes (telefon või tahvelarvuti) lugemiseks peate installeerima selle tasuta rakenduse: PocketBook Reader (iOS / Android)

    PC või Mac seadmes lugemiseks peate installima Adobe Digital Editionsi (Seeon tasuta rakendus spetsiaalselt e-raamatute lugemiseks. Seda ei tohi segamini ajada Adober Reader'iga, mis tõenäoliselt on juba teie arvutisse installeeritud )

    Seda e-raamatut ei saa lugeda Amazon Kindle's. 

Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6th-9th of December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including:• Structural mechanics• Computational mechanics• Reinforced and prestressed concrete structures• Steel structures• Composite structures• Civil engineering materials• Fire engineering• Coastal and offshore structures• Dynamic analysis of structures• Structural health monitoring and damage identification• Structural reliability analysis and design• Structural optimization• Fracture and damage mechanics• Soil mechanics and foundation engineering• Pavement materials and technology• Shock and impact loading• Earthquake loading• Traffic and other man-made loadings• Wave and wind loading• Thermal effects• Design codesMechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Volume I: Mechanics Of Structures And Materials: Advancements And Challenges
Preface
xxi
Acknowledgements
xxiii
Organizing committee
xxv
International scientific committee
xxvii
Keynote submissions
Strength design of high-strength steel beams
3(8)
M.A. Bradford
X. Liu
Physical, chemical and microbiological processes in the long term corrosion of steel and cast iron infrastructure
11(12)
R.E. Melchers
Are seismically designed buildings inherently more resistant to progressive collapse?
23(8)
D.A. Nethercot
C.A. Vidalis
Materials technology research to structural design of geopolymer concrete
31(10)
J.G. Sanjayan
Maintenance and condition monitoring; multi-model and hybrid approach to SHM
41(12)
A. De Stefano
VLFS technology for land creation on the sea
53(12)
C.M. Wang
General submissions
Reinforced and prestressed concrete structures
Axially loaded three-side restrained reinforced concrete walls: A comparative study
65(8)
N.M. Ho
M.M. Lima
J.H. Doh
Experimental investigation on the FRP-confined and unconfined concrete containing high rubber content
73(6)
R. Hassanli
O. Youssf
Effect of steel fibre on thermal behavior of concrete under elevated temperature
79(6)
X. Lang
C.Q. Wu
Analysis of bridge abutment movement through a case study
85(6)
M. Rashidi
B. Samali
S. Kempton
Early-age tensile creep and drying shrinkage in GGBFS concrete
91(6)
I. Khan
A. Castel
R.I. Gilbert
Study of disturbed strain regions for serviceability analysis of cracked RC flexural members
97(6)
A. Murray
R.I. Gilbert
A. Castel
Image analysis method used in the seismic rehabilitation of squat reinforced concrete shear walls using CFRP sheets
103(6)
J.E. Woods
D.T. Lau
Y.S. Yang
The effect of different shapes of shear keys at the interface of old and new concretes of jacketed RC column
109(6)
M.R. Alam
P.K. Sarker
M. Rahman
S.H. Himel
Performance of damaged RC beams repaired and/or strengthened with FRP sheets: An experimental investigation
115(6)
T. Imjai
R. Garcia
Post-yield bond behavior of reinforcing bars embedded in concrete under axial loading up to fracture
121(8)
J. Yu
K.H. Tan
N.S. Lim
Eliminating shrinkage in tension stiffening model of concrete beams by the hybrid approach
129(8)
G. Kaklauskas
P.L. Ng
V. Gribniak
Numerical modelling of cracked RC tension members using stress-transfer approach
137(6)
G. Kaklauskas
P.L. Ng
K. Jakubovskis
R. Ramanauskas
Finite element modelling of concrete filled steel tubes subjected to static pure bending
143(6)
A. Karrech
M. Elchalakani
H. Basarir
Experimental study on the tensile and bending creep behavior of cracked UHP-FRCC
149(6)
T. Nishiwaki
H. Otaki
G. Igarashi
S. Kwon
F. Shaikh
A.P. Fantilli
Screw anchors installed in early age concrete
155(8)
A. Mohyeddin
E. Gad
R. Khandu
K. Yangdon
J. Lee
M. Ismail
Steel and composite structures
Analysis of demountable steel column-baseplate connections under monotonic loading
163(6)
D. Li
B. Uy
F. Aslani
V. Patel
Rigorous method for flexural design of reinforced concrete members
169(6)
Y.F. Wu
Behaviour of load carrying precast concrete sandwich panels under various supporting conditions
175(6)
E. Hamed
Shear buckling of composite plates on tensionless elastic foundations
181(6)
J. Dong
X. Ma
J.E. Mills
Y. Zhuge
Asset management of steel bridges
187(6)
M. Rashidi
B. Samali
A. Azad
H. Hatamian
Bond deterioration between near-surface mounted carbon FRP strips and concrete under moisture conditions
193(8)
H. Aydin
R.J. Gravina
P. Visintin
Fatigue tests on notched steel beams strengthened with CFRP laminates
201(6)
Q.Q. Yu
Y.F. Wu
Galvanic corrosion behavior of the welding of stainless steel and carbon steel
207(8)
Y. Miyazaki
K. Komi
Effects of floor slabs on the structural performance of blind-bolted composite joints
215(8)
M.K. Hassan
Z. Tao
T.Y. Song
L.H. Han
Simplified numerical modelling of circular concrete-filled steel tubular stub columns
223(8)
U. Katwal
Z. Tao
M.K. Hassan
W. Wang
Analysis of mechanical behaviour of circular concrete filled steel tube columns using high strength concrete
231(6)
H.D. Phan
H.H. Trinh
Behaviour of composite sandwich beams with different shear span-to-depth ratios
237(6)
W. Ferdous
A. Manalo
T. Aravinthan
Behavior of pultruded multi-celled GFRP hollow beams with low-strength concrete infill
243(6)
M. Muttashar
W. Karunasena
A. Manalo
W. Lokuge
Effects of fibre location and density on the flexural toughness in FRC beams
249(6)
M. Manca
D. Ciancio
P. Dight
Process-induced deformation of composite I-shaped stiffened structures
255(4)
C. Dong
J. Pitt
Global stability investigation on welded Q460GJ structural steel unrestrained beams under three-point bending tests
259(6)
B. Yang
G. Xiong
Y. Zhang
S.D. Nie
M. Elchalakani
System transformation scheme and construction control method for self-anchored suspension bridge with steel-concrete composite girder
265(6)
T.P. Wang
X.Y. Zhou
G.J. He
J. Yi
A comprehensive study on corrosion and hydrogen embrittlement of low carbon steel
271(8)
L. Li
M. Mahmoodian
C.Q. Li
S.W. Zhou
Structural mechanics, computational mechanics, fracture and damage mechanics
Finite element analysis of the crushing behaviour of aluminium honeycombs under combined compression-shear loads
279(8)
A.A. Ashab
D. Ruan
G.X. Lu
An adaptive elastic scaled boundary finite element approach for limit analysis of structures
287(6)
A. Mellati
C. Song
F. Tin-Loi
S. Tangaramvong
Stress intensity factors for inclined cracks in pipes under axial tension and bending
293(6)
G.Y. Fu
C.Q. Li
W. Yang
Scaled boundary finite element method for exterior acoustic-structure interaction analyses
299(6)
L. Liu
C. Song
W. Gao
C. Birk
A discrete framework for fracture simulation based on the embedment of strong discontinuities with minimum degrees of freedom
305(6)
D. Dias-da-Costa
G. Ranzi
Numerical modelling of concrete beams at serviceability conditions with a discrete crack Approach and non-iterative solution-finding algorithms
311(6)
D. Dias-da-Costa
R.N.F. do Carmo
R. Graca-e-Costa
New method to investigate the permeability of stressed concrete
317(6)
M.D. Wimalasiri
D.J. Robert
C.Q. Li
Unified uncertain stability analysis of structures
323(6)
W. Gao
D. Wu
F. Tin-Loi
Discrete element modelling of fracture in quasi-brittle materials
329(8)
N.H.T. Nguyen
H.H. Bui
J. Kodikara
S. Arooran
G.D. Nguyen
P. Jitsangiam
Inelastic analysis of steel concrete composite beams based on a higher order beam theory
337(8)
A.H. Sheikh
M.A. Uddin
J. Wen
An analytical approach to determine the span and fracture positions of roof strata prior to rock burst
345(6)
S.T. Ji
C.W. Zhang
K.Z. Zhang
Stress analysis of STL models by octree mesh and scaled boundary finite element method
351(6)
Y. Liu
A.A. Saputra
C. Song
Effect of corrosion influencing factors of cast iron pipes in clay soil
357(6)
W.G. Wang
D.J. Robert
A. Zhou
C.Q. Li
Analysis of nano-beams with influences of surface stresses and nonlocal elasticity
363(8)
T.B. Nguyen
J. Lawongkerd
J. Rungamornrat
An efficient finite element model of bolted disk-drum joints in aero-engine
371(6)
Z.Y. Qin
F.L. Chu
Crack breathing as a function of crack location under the effect of unbalance force
377(6)
H.M. Mobarak
H. Wu
Multicomponent tensile buckling
383(4)
I.T. Hossain
F. Guillard
I. Einav
An insight into equivalent strut modelling of infill-RC frames
387(8)
A. Mohyeddin
S. Dorji
E. Gad
H. Goldsworthy
Civil engineering materials
Workability and compressive strength properties of high strength geopolymer mortars
395(6)
M.Z.N. Khan
F. Shaikh
Y.F. Hao
H. Hao
Experimental study on optimizing the crumb rubber concrete mechanical performance
401(6)
O. Youssf
R. Hassanli
Steel fibre reinforced concrete: From X-ray imaging observation to modelling
407(8)
T.S. Ng
T.N.S. Htut
S.J. Foster
Comparative performance of alkali-activated slag and fly ash at elevated temperatures
415(6)
Z. Pan
Z. Tao
Y.F. Cao
N. Bajracharya
T. Murphy
R. Wuhrer
Effects of elevated temperature curing of brown coal fly ash geopolymer
421(6)
R. Dirgantara
D.W. Law
Structural behaviour of UHPFRC short and slender columns subjected to axial and eccentric loads
427(6)
M.S. Mohamed Ali
M. Singh
A.H. Sheikh
The effect of aluminium reaction on formation mechanism and structural properties of geopolymers
433(4)
A. Hajimohammadi
T.D. Ngo
P. Mendis
Comparison of creep behaviour of geopolymer concrete and OPC concrete
437(6)
C.H. Un
J.G. Sanjayan
R. San Nicolas
Experimental investigation of water vapour sorption isotherms and microstructure of low calcium geopolymer binders
443(6)
J.M. de Burgh
I.M.A. Al-Damad
S.J. Foster
Influences of graphene oxide on electrical resistivity development of Portland cement paste
449(4)
W.G. Li
Z.Y. Luo
C. Long
W.H. Duan
S.P. Shah
A novel composite material of A356 aluminum alloy reinforced with alumina (Al2O3) powder for automobile construction industries
453(6)
S. Numsarapatnuk
T. Imjai
W. Insorn
Investigation of equivalent frame modelling for seismic analysis of unreinforced masonry buildings with flexible diaphragms
459(6)
Y. Nakamura
H. Derakhshan
A.H. Sheikh
M.C. Griffith
J. Ingham
Design of alkali activated concrete using the Taguchi method
465(6)
N.A. Farhan
M.N. Sheikh
M.N.S. Hadi
Mechanical behavior of a new Polyvinyl Alcohol fiber reinforced Engineered Cementitious Composite (PVA-ECC) using local ingredients
471(6)
D. Meng
C.K. Lee
Y.X. Zhang
Analytical study on material properties of fibre reinforced cementitious composites
477(6)
H. Tian
Y.X. Zhang
Y.H. Cui
C. Yang
Controlling the setting time of pavement concrete using accelerating-admixture by silica fume technology
483(4)
N.H. Hai
T.V. Mot
Direct tensile test of high strength concrete with and without steel fibres
487(6)
H.A. Hasan
F. Alhussainy
M.N. Sheikh
M.N.S. Hadi
Influence of steel, glass and hybrid fibres on the behaviour of reactive powder concrete
493(6)
A.H.M. Algburi
M.N. Sheikh
M.N.S. Hadi
Laboratory tests of the pull-out behaviour of spiral shaped steel fibres from concrete matrix
499(6)
Y.F. Hao
H. Hao
A novel numerical method for simulations of leaching of cementitious materials in ammonium nitrate solution
505(4)
Y. Yu
Y.X. Zhang
Estimation of elastic modulus of cementitious materials under external sulfate attack
509(6)
Y. Yu
Y.X. Zhang
Shock and impact loading
Confinement efficiency of concrete cylinders wrapped with different types of FRP under impact loads
515(6)
T.M. Pham
H. Hao
Implosive demolition of tall masonry and concrete chimney stacks within a designed footprint
521(8)
G.J. McKenzie
B. Samali
C.W. Zhang
Multi-hazard resistance capacity of precast segmental column with post-tensioning tendon under impact and cyclic loading
529(6)
X.H. Zhang
H. Hao
C. Li
Development of an anchor system for seismic and blast retrofit of reinforced concrete structures using FRP sheets
535(8)
J.E. Woods
D.T. Lau
Study on dynamic characteristics of pre-damaged rock under impact loading
543(6)
S. Liu
C.W. Zhang
FBG based strain monitoring of reinforced concrete blast walls under high-velocity bullets penetration
549(6)
Q.H. Zhang
Y. Wang
Y.Y. Sun
L. Gao
J.L. Duan
Z.L. Zhang
X.D. Huang
Z.W. You
F.J. Rong
Z.S. Chen
Research on SHM of concrete based on FBGs without coating under explosion load
555(6)
Y.Y. Sun
Q.H. Zhang
L. Gao
J.L. Duan
Y. Wang
Z.L. Zhang
X.D. Huang
Z.W. You
The effect of shear and bending capacities on impact behavior of RC beams
561(6)
P. Wongmatar
C. Hansapinyo
K.M. Bi
V. Vimonsatit
Experimental study on steel wire mesh reinforced concrete slabs against close-in detonations
567(4)
J. Li
C.Q. Wu
Experimental study of steel wire mesh reinforced structural insulated panels against windborne debris impact
571(6)
W.S. Chen
H. Hao
Q.F. Meng
Numerical analysis of human body motion under explosion
577(4)
P.W. Sielicki
T. Gajewski
Fatigue damage of V-lock chain ring for mining under random load
581(6)
Q. Zhang
H.J. Wang
Ballistic performance of plymetal structure produced by direct metal deposition
587(6)
S.H. Masood
D. Ruan
P. Rajapatruni
Impact responses of aluminium foam sandwich panels with fibre metal laminate skins
593(6)
C.J. Liu
Y.X. Zhang
Design of a hybrid composite anti-ram bollard against impact
599(6)
P. Tran
S. Linforth
R. Lumantarna
T.D. Ngo
Isogeometric analysis of functionally graded plates based on a new polynomial displacement field
605(6)
T.N. Nguyen
P. Tran
T.D. Ngo
Design optimisation of auxetic composite structures under blast loading
611(8)
G. Imbalzano
P. Tran
S. Linforth
T.D. Ngo
P.V.S. Lee
P. Mendis
Earthquake loading, traffic and other man-made loadings
Effect of partially infill wall on the seismic behavior of RC frame buildings
619(8)
K. Thinley
H. Hao
Large-scale testing of bridge system with unseating mitigation devices under spatially varying ground motions
627(6)
B. Shrestha
H. Hao
K.M. Bi
L.X. He
W.X. Ren
Seismic performance of FRPs reinforced concrete filled steel tube
633(6)
C.Y. Zhu
L. Sun
Y.H. Zhao
Experimental and numerical analyses on dynamic properties of materials in shaking table test
639(6)
H. Zhang
H.N. Li
D.B. Wang
M. Li
Dimensional analysis of pounding effect between adjacent inelastic oscillators
645(6)
S. Jiang
C.W. Zhang
B. Mou
Simulation of three-component seismic motions at seafloor using onshore earthquake, recordings
651(6)
C. Li
H.N. Li
K.M. Bi
H. Hao
Response uncertainty under varying orientations of ground motions
657(6)
Z. Alam
C.W. Zhang
B. Samali
Earthquake-resistant performance of a steel frame model with inverse-chevron buckling restrained braces
663(6)
Y. Xu
H. Guan
H. Karampour
Y.C. Loo
X.J. Zhou
Nonlinear dynamics analysis of a cracked beam subjected to combined harmonic excitations by precise integration method
669(6)
C.C. Cui
J.K. Liu
Y.M. Chen
Simplified fatigue assessment for earthquake losses: Cycle counting and fragility analysis to quantify damage
675(8)
J.B. Mander
G.W. Rodgers
D. Whittaker
Problematic issues surrounding footfall excitation of floor slabs in buildings
683(8)
L. Nguyen
N. Haritos
Study on the design method of story stiffness in the reinforced concrete dual structural systems
691(6)
W.X. Xu
W.S. Yang
J.G. Zhang
D.H. Yu
Numerical simulation and experimental study for smart isolation control system based on LQR algorithm
697(6)
W.Q. Fu
W.Q. Tang
C.W. Zhang
Dynamic modeling of magnetorheological elastomer base isolator based on extreme learning machine
703(6)
Y. Yu
Y. Li
J. Li
X. Gu
S. Royel
A metric to measure the resilience of communities based on the seismic performance of buildings: A CBD perspective
709(6)
Q. Tao
Z. He
Effect of damping on progressive collapse performance of structures
715(6)
J. Yu
C. Yin
Mode-based equivalent method for seismic response analysis of soil column
721(6)
C. Li
Y. Yuan
J.Y. Yuan
H.T. Yu
Uncertain dynamic instability analysis of column subject to axial load
727(8)
Y. Huang
A. Liu
D. Wu
W. Gao
Structural health monitoring and damage identification, structural reliability and optimization
Fiber Bragg Grating monitoring in the gravel soil landslide experiment
735(6)
Y. Wang
L. Gao
Y.Y. Sun
Q.H. Zhang
J.L. Duan
Z.L. Zhang
X.D. Huang
Z.W. You
Automation processing realization of internal force monitoring information of supporting structure of foundation pit
741(6)
L. Gao
Y. Wang
J.L. Duan
Y.Y. Sun
Q.H. Zhang
X. Rong
Z. Xiong
C. Ma
Stress response and damage of a masonry structure subjected to ground motion induced by tunnel blasting using modal analysis method
747(8)
X. Guan
C.W. Zhang
P. Zhang
X. Wang
Z. Yang
Development of an optimum maintenance strategy for infrastructure
755(6)
H. Baji
C.Q. Li
M. Mahmoodian
Repair of corroded steel pipelines using CFRP
761(6)
M. Elchalakani
A. Karrech
Vibration and structural performance of PC deteriorated girder under varying environmental conditions
767(8)
M.T. Ha
S. Fukada
Temperature-based stiffness identification of Que-Ti's in a historic Tibetan timber building
775(8)
Q.S. Yang
M.N. Lyu
X.Q. Zhu
Study of ultrasonic guided waves inspection for arch bridge suspender cables based on SAFE
783(6)
P.F. Zhang
Z.F. Tang
F.Z. Lv
K.J. Yang
X.Y. Jiang
Performance framework for modular construction
789(4)
L. Pham
E. Gad
S. Fernando
K. Hargroves
Close-range photogrammetry for accurate deformation distribution measurement
793(10)
J.J. Wang
N. Gowripalan
J. Li
V.V. Nguyen
Soil mechanics, foundation engineering and pavement technology
Fire-damaged flexible pavement deterioration under dynamic loading: A finite element study
803(6)
S. Fragomeni
R.C. van Staden
Full-depth flexible pavement performance impacted by rainfall: Finite element analysis
809(6)
R.C. van Staden
S. Fragomeni
Y. Chen
Numerical simulation of shear band on gradient plastic theory
815(6)
S. Hou
S. Guo
X. Du
Dynamic soil-bridge interaction for incident plane waves
821(6)
S.L. Chen
J. Jin
A constitutive model for size dependent behaviour of soils
827(8)
D.G. Phan
G.D. Nguyen
H.H. Bui
Approach for calculating the stress response of transversely isotropic stratified soil
835(8)
Z.J. Han
X.W. Zhou
G. Lin
Flexural behaviour of concrete pavements reinforced with geogrid materials
843(6)
A.S. Al-Hedad
M.N.S. Hadi
Investigation of water seepage in multi-storey buildings by vibration measurements and moisture monitoring
849(6)
S.S.E. Lam
J.L. Fu
V. Wong
T.H.T. Chan
Effects of particle shape on the collapse behaviour of a coarse grain material
855(6)
R. Mahinroosta
V. Oshtaghi
M. Li
Experimental study on multi-layer composite pavement system under drop weight impacts
861(8)
J. Wu
X. Liu
C.W. Zhang
Coastal and offshore structures, wave and wind loading
Microstructural effect on the marine corrosion of low-carbon steel weldments
869(6)
I.A. Chaves
R.E. Melchers
On collapse of pipe-in-pipe systems under external pressure
875(6)
H. Karampour
M. Alrsai
H. Guan
F. Albermani
Anti-roll motions control of semi-submersible platform using tuned rotary inertia damper system
881(8)
H. Liang
C.W. Zhang
L. Li
In-plane crashworthiness of chiral honeycombs
889(6)
D. Gao
C.W. Zhang
Natural frequency and sensitivity analysis of tripod foundation for offshore wind turbine
895(8)
J.H. Zhang
Q.Y. Wang
C.W. Zhang
D.W. Gao
Fragility curves of existing offshore platforms against storm loads using Endurance Wave Analysis (EWA)
903(8)
M. Zeinoddini
H.M. Nikoo
Y. Yaghubi
Non-linear irregular wave interaction with a tripile foundation
911(10)
R. Mo
M. Li
H.G. Kang
Thermal effects and fire engineering
Tensile and shear behaviour of Hollo-Bolts at elevated temperatures
921(6)
Z. Tao
T.Y. Song
A. Razzazzadeh
Effect of calcium aluminate cement on workability and compressive strength of fly ash geopolymer mortar cured at ambient temperature
927(6)
Y.F. Cao
Z. Tao
Z. Pan
T. Murphy
R. Wuhrer
Study of class G well cement behavior under triaxial compression and flexure tests
933(6)
E. Arjomand
T. Bennett
G.D. Nguyen
An investigation into the effect of exposed timber on thermal load
939(6)
C. Gorska Putynska
A. Law
J. Torero
Fire performance of cold-formed steel stud walls lined with calcium silicate boards
945(6)
A.D. Ariyanayagam
M. Mahendran
An investigation into temperature gradient effects on concrete performance at elevated temperatures
951(6)
Q.X. Le
V.T.N. Dao
C. Maluk
J. Torero
L. Bisby
Efficiency of different intensity measures for probabilistic fire engineering
957(6)
M. Shrivastava
A.K. Abu
R.P. Dhakal
P.J. Moss
Effect of transient thermal strain on the stability of shallow concrete arches
963(8)
Y. Bouras
Z. Vrcelj
Spalling of concrete structural walls exposed to fire
971(14)
M. Hedayati
M. Sofi
P. Mendis
T.D. Ngo
Author index
977(8)
Volume 2: Mechanics Of Structures And Materials: Advancements And Challenges
Mini-symposiums
Young experts mini-symposium on structural health monitoring
Sensor fault detection for structural health monitoring using dynamic independent component analysis
985(6)
H.B. Huang
T.H. Yi
H.N. Li
Structure damage identification method based on statistical characteristics of the structural vibration response
991(8)
J.X. Yang
J.Q. Shu
L. Huang
Steel bar corrosion monitoring based on encapsulated piezoelectric sensors
999(6)
Y. Xu
J. Zhou
Y.F. Zhao
A performance-based service life design method for reinforced concrete structures under chloride environment
1005(8)
D.H. Yang
T.H. Yi
G.P. Li
Modal frequency-ambient condition pattern recognition by a novel machine learning algorithm
1013(6)
H.Q. Mu
K.V. Yuen
S.C. Kuok
Dynamic loading test and numerical simulation on reinforced concrete members
1019(6)
G.X. Fan
H.Y. Guo
S.T. Yang
D.B. Wang
H. Zhang
A LC oscillation method for stress measurement of steel strands
1025(6)
B.N. Zhang
X.X. Li
C. Yuan
Z.M. Chen
Analytical global sensitivity analysis for parameter selection in finite element model updating
1031(6)
H.P. Wan
W.X. Ren
A condition assessment method for the time-variant seismically isolated structure
1037(6)
Y. Ding
L.N. Guo
Power Spectral Density Transmissibility (PSDT): An effective tool towards operational modal analysis insensitive to natural excitation
1043(6)
W.J. Yan
Q. Sun
W.X. Ren
Impact load identification for composite structures using Bayesian regularization and artificial bee colony algorithm
1049(8)
G. Yan
H. Sun
Damage localization of long-span bridges based on stress influence lines and information fusion technique and its validation
1057(6)
W.B. Yang
Z.W. Chen
Q.L. Cai
S.Y. Zhu
Q.F. Cheng
CCD deflection monitoring system for Songjiazhuang cloverleaf junction
1063(6)
B.H. Shan
L. Wang
X.Y. Huo
W.T. Yuan
Z.L. Xue
J.P. Ou
Dynamic condensation approach to finite element model updating of large-scale structures
1069(8)
S. Weng
W. Tian
H.P. Zhu
F.N. Li
Y. Xia
Study about optical fiber force-testing ring for bridge cable force monitoring
1077(4)
S.Y. Li
X.F. Zhao
D.S. Li
Behaviors prediction of pre-pressed spring self-centering energy dissipation brace
1081(6)
L.H. Xu
X.W. Fan
Z.X. Li
Impact behavior of corroded RC beams
1087(6)
O. Yang
M.J. Dai
Design and application of structural health monitoring system for Dalian gymnasium
1093(4)
L. Ren
T.H. Yi
H.N. Li
Stationarity test of vibration signals with time-frequency surrogates
1097(6)
Z.C. Wang
F. Wu
W.X. Ren
Structural damage detection from a new damage index formed from displacement response
1103(6)
X.Y. Li
K. Huang
Mechanical behavior investigation of a novel 3D isolator made of shape memory alloy pseudo-rubber
1109(6)
S.C. Li
H. Xu
H. Li
C.X. Mao
G.B. Zhao
Structural damage detection using residual force and ICA
1115(6)
Z.H. Ding
Z.R. Lv
J.K. Liu
Artificial bee colony algorithm for structural damage identification in axially functionally graded beams
1121(4)
R.Z. Yao
J.K. Liu
Z.R. Lu
Structural damage identification of a bridge from a passing test vehicle using frequency domain method
1125(6)
Y. Yang
B.Y.L. Jia
Study on the two points-pasted reinforcement corrosion monitoring method based on FBG
1131(4)
L. Sun
C.Y. Zhu
C. Chen
J. Li
Numerical analysis and experimental study on ice-induced vibration of jacket ocean offshore platform with rocking column
1135(6)
J.G. Zhang
F.F. Liu
Fatigue cracking identification of reinforced concrete bridges using vision-based sensing technology
1141(6)
X.W. Ye
C.Z. Dong
Experimental study on structural measurements analysis for finite element model updating
1147(6)
H. Song
B. Wu
L.R. Zhou
The study on the durability of GFRP rebars when sustaining load
1153(6)
J.W. Tu
A. Almansoor
D.L. Guo
Development of Elasto-Magneto-Electric (EME) sensor for steel cable force monitoring
1159(6)
R. Zhang
Y.F. Duan
Y. Zhao
Y.Z. Luo
S.W. Or
K.Q. Fan
Deflection identification of a pre-stressed concrete continuous beam bridge
1165(8)
Z. Chen
Y.D. Tian
Q. Xia
P.J. Li
Y.F. Zhang
Z.S. Wu
J. Zhang
Monitoring and seismic response analysis of long irregular base-isolated structure including temperature effect
1173(8)
W.R. Li
W.Z. Zheng
Y.F. Du
H. Li
H. Wang
Slope stability analysis and early warning via WSN technique
1181(6)
Z. Lu
C.Y. Liu
X.S. Han
J.D. Peng
The effects of service environment on health monitoring of concrete structures using smart aggregates
1187(6)
D.J. Zou
C.C. Du
T.J. Liu
Long-term performance analysis of structural key elements using monitoring data
1193(6)
W. Lu
L.H. Qiu
J. Teng
Structural health monitoring and performance evaluation of a large diameter bored pile with distributed fiber optic sensors
1199(6)
D.S. Xu
Effect of seismic duration and safety margin on structural dynamic reliability
1205(8)
Z.H. Zhang
X.Y. Wu
W.J. Yang
Damping effect on vortex-induced vibration of stay cable using cross ties installed with damper
1213(4)
M. Liu
W.H. Yang
Study on damage diagnosis indices fusion for long-span suspension bridges under ambient vibration
1217(6)
J.J. Zhu
L.X. Wang
H. Jiang
X.Y. Li
Stochastic modelling of fatigue crack evolutions in composite blades of offshore wind turbines
1223(6)
C. Zhang
H.P. Chen
Compressive sensing system based on random demodulation for structural health monitoring
1229(6)
D. Liang
X. Li
Z.F. Fan
Guided wave-based structural health monitoring of the full-scale composite aircraft tail in static test
1235(6)
Y.S. Wang
H. Sun
X.L. Qing
Study on resisting-high-strain performance of piezoelectric transducer
1241(8)
H. Sun
Y.S. Wang
X.L. Qing
Entropy change research of concrete cracking evolution based on dissipative structure
1249(6)
C.S. Xiang
F.C. Mao
J.S. Cheng
Y. Zhou
M.D. Li
L.X. Wang
System identification of an in-service utility-scale wind turbine tower for vibration-based structural health monitoring
1255(6)
K.S. Dai
Y. Wang
Y. Xu
W. Zhu
J. Liu
Damage identification of simply supported beam subjected to moving force
1261(4)
W.Y. He
S. Zhu
W.X. Ren
Reconstruction of distributed wind load on structures from response samples
1265(8)
S.Q. Wu
J. Zhu
Establish equivalent model for structure damage detection based on the main navigation channel of Donghai bridge
1273(6)
H.W. Huang
H.J. Li
X. Chu
Steady suction-based aerodynamic control for suppressing vortex induced vibration of a bridge deck section
1279(6)
D.B. Xin
H.F. Zhang
J.P. Ou
Numerical simulation of wind field on the site of a long-span bridge located in mountainous area based on WRF
1285(6)
Y. Han
L. Shen
C.S. Cai
Research on the cable clamp control method of wake galloping on the straddle sling of suspension bridges
1291(4)
P. Guo
S.L. Li
D.W. Wang
Mitigation of wind-induced vibration of a multi-tower building using tuned mass damper
1295(6)
X. Chen
A.Q. Li
Z.Q. Zhang
P. Sun
Wind-induced vibration control and energy harvesting of buildings via a regenerative electromagnetic tuned mass damper
1301(6)
H.X. Sun
Y.F. Luo
X.Y. Wang
Research of the temperature effects on strain response in the steel-truss arch railway bridge using FIR filtering
1307(6)
H.W. Zhao
Y.L. Ding
A.Q. Li
Research on regional sensitivity of dynamic response for long span suspension bridge based on SHM data
1313(6)
C.Q. Miao
H.F. You
H.B. Zhu
Operational modal analysis and full-scale test of a 13-storey new precast superimposed slab shear wall building
1319(6)
Y.C. Ni
X.L. Lu
W.S. Lu
A multi-objective firefly algorithm for wireless sensor placement in structural health monitoring
1325(6)
G.D. Zhou
M.X. Xie
Turbulent wind characteristics of tropical cyclones based on a revised uniform analysis framework
1331(8)
L.X. Li
T. Wu
Y.Q. Xiao
L.L. Song
Wind induced vibrations of vertical hangers of a long-span suspension bridge considering the interference of upstream tower column
1339(4)
W.L. Chen
D.L. Gao
H. Li
Influence of subway traffic induced vibration study for surface wave based nonintrusive monitoring
1343(6)
K.S. Dai
K. Liu
X.F. Li
Y.F. Weng
L.G. Huang
X. Zhao
Q.Y. You
Damping ratios identification by sensitivity-based model updating: Experimental investigation
1349(6)
J. Li
H. Hao
G. Fan
Improved CoC matrix for damage detection with general white noise excitation
1355(8)
S.S. Law
Y. Hui
Aqueduct leakage monitoring based on an image difference algorithm: Preliminary experimental validation
1363(6)
Y.H. An
Z.Z. Wang
J.P. Ou
Structural health monitoring: Theories and application
Decentralized damage detection for nonlinear structures
1369(6)
P.H. Ni
Y. Xia
Comparison of statistical and non-statistical artificial neural network methods for damage detection using modal data
1375(6)
K.H. Padil
N. Bakhary
System identification of nonlinear structures by a substructuring method
1381(8)
S. Weng
F. Gao
H.P. Zhu
W. Tian
Y.Y. Yan
F.N. Li
Planning and managing uncertainties in known broadband input vibration test
1389(6)
C.T. Ng
S.K. Au
Bayesian approach for characterizing wind-induced displacement responses of bridge using structural health monitoring data
1395(6)
Y.Q. Ni
Y.W. Wang
Nonlinear joint model updating using static load test results
1401(6)
P.P. Yuan
Z.C. Wang
W.X. Ren
X. Yang
Sensitivity analysis of stress influence line-based damage indices application to long-span bridges: Preliminary study
1407(8)
L.Y. Mo
Z.W. Chen
S.Y. Zhu
Q.F. Cheng
Application of the impedance-based technique for damage diagnosis on tunnel segment structure
1415(8)
H.P. Zhu
D.M. Ai
H. Luo
Vibration and deformation monitoring of a long-span rigid-frame bridge with distributed long-gauge sensors
1423(6)
Y.D. Tian
X. Zhang
J. Zhang
Prediction of crack propagation by vector form intrinsic finite element method
1429(6)
Y.F. Duan
S.M. Wang
R.Z. Wang
C.Y. Wang
E.C. Ting
Experimental study about damage identification for underground structure based on frequency response function
1435(6)
S.N. Wang
H. Luo
H.P. Zhu
Simultaneous identification of moving forces and structural damages by L1/2 regularization method
1441(6)
C.D. Pan
L. Yu
Damage identification of monopile offshore wind structures using data fusion of acceleration and angular velocity
1447(4)
S.H. Sim
E. Kim
J.W. Park
Concrete crack assessment using unmanned aerial vehicle
1451(6)
H. Kim
S.H. Sim
Large scale neural network for damage detection in civil engineering structures
1457(6)
D. Darsono
K. Park
M. Torbol
Bridge deflection estimation using multi-channel acceleration measurement
1463(6)
T. Nagayama
C. Zhang
Vibration monitoring of expressway viaducts and comparative analysis of their dynamic characteristics
1469(8)
M. Kuleli
T. Nagayama
D. Su
Investigating feasibility of drive-by bridge monitoring by laboratory experiments
1477(8)
C.W. Kim
K.C. Chang
S. Inoue
S. Hasegawa
P.J. McGetrick
Dynamic response based damage detection for beam-like structures using deep learning
1485(8)
Y.Z. Lin
H.W. Ma
Threshold selection method for GDP model based on estimated strain extreme values of bridge due to vehicle loads
1493(6)
X. Yang
J. Zhang
W.X. Ren
An experimental study of a nonlinear piezoelectric energy harvester
1499(4)
W. Shen
Z. Huang
H.P. Zhu
Operational modal analysis for structural health monitoring
1503(6)
H.F. Lam
J.H. Yang
J. Hu
Time series-based structural safety diagnosis using statistical process control of root mean square
1509(8)
H. Yu
H.P. Zhu
F. Gao
S. Weng
Australian network of structural health monitoring
Analysis of stress effect on Lamb wave propagation in isotropic plates
1517(6)
C.T. Ng
M. Mohabuth
A. Kotousov
Dynamic performance assessment of a novel pultruded fibre-reinforced polymer footbridge
1523(6)
J.W. Ngan
C. Caprani
E. Ahmadi
Y. Bai
Static performance assessment of a novel pultruded fibre-reinforced polymer footbridge
1529(6)
S.H. Zhang
C. Caprani
S. Satasivam
Y. Bai
Useful tips for automated model updating of medium rise buildings
1535(6)
K.A.T.L. Kodikara
T.H.T. Chan
A. Nguyen
D.P. Thambiratnam
Simulation of various damage scenarios using finite element modelling for structural health monitoring systems
1541(6)
V.V. Nguyen
J. Li
Y. Yu
U. Dackermann
M.M. Alamdari
Development of a portable NDE system with advanced signal processing and machine learning for health condition diagnosis of in-service timber utility poles
1547(6)
Y. Yu
J. Li
U. Dackermann
M. Subhani
Ultrasonic monitoring of infrastructure: Comparison of conventional and laser systems
1553(6)
S. Majhi
A. Mukherjee
V. Karaganov
B. Uy
Utilizing smartphones for geospatial data collection and construction set out surveying
1559(6)
A.M. Lee
S. Majhi
A. Mukherjee
Railway track condition monitoring using dynamic measurements on in-service vehicles
1565(8)
X.Q. Zhu
S.S. Law
B. Samali
Infrastructure resilience to earthquake actions
Seismic response of secondary structures located at different levels of a building
1573(4)
E. Lim
N. Chouw
Experimental investigation of long span transmission tower-line system subjected to non-uniform seismic excitations
1577(6)
L. Tian
X. Gai
Y.H. Niu
R.S. Ma
Cyclic load responses of RC hollow bridge columns
1583(4)
Y.L. Zhou
Q. Han
Composite optimal control for the seismic response of a long-span triple-tower suspension bridge
1587(8)
H. Wang
Y.F. Wu
B. Sha
K.M. Bi
A.Q. Li
Effect of pile type and pile head fixity on the seismic response of a 5 x 5 pile-raft system embedded in a soft clay subjected to far-field ground motions
1595(6)
L. Zhang
H.B. Liu
Response spectrum analysis of a high-pier railway bridge subjected to multiple support excitations
1601(8)
H.Y. Jia
X.L. Du
D.P. Guo
S.X. Zheng
L.P. Li
Theoretical investigation of vertical pounding phenomenon between girder and support under near-fault vertical ground motions
1609(6)
H. Yang
J. Yang
X. Yin
Numerical study of using RFHDS connected PIP system to mitigate earthquake induced subsea pipeline vibrations
1615(6)
K.M. Bi
H. Hao
Demoting splitting crack formation in confined concrete by silica fume
1621(6)
A.A. Roslee
D. Fernando
J.C.M. Ho
Seismic retrofit assessment of cable-stayed bridges with cable-sliding friction aseismic bearing
1627(6)
J. Zhong
H.P. Wan
W.X. Ren
W.C. Yuan
An introduction of tools for evaluating the influence of building codes on the level of earthquake fatalities globally
1633(6)
J.E. Daniell
F. Wenzel
A. Werner
A.M. Schaefer
H.H. Tsang
Numerical and experimental investigation into friction devices installed between concrete columns and steel beams
1639(6)
R.W.K. Chan
B. Hu
Seismic vulnerability assessment of irregular reinforced concrete buildings in Australia
1645(8)
A. Mehdipanah
E. Lumantarna
N.T.K. Lam
H. Goldsworthy
H.H. Tsang
J.L. Wilson
E. Gad
Ultimate drift prediction models of rectangular squat reinforced concrete shear walls
1653(8)
D.T.W. Looi
R.K.L. Su
B. Cheng
M.J. Zhou
Simplified dynamic analysis of reinforced concrete tall buildings using Timoshenko beam model
1661(8)
R.K.L. Su
K.C. Liu
D.T.W. Looi
Dynamic analysis of continuous multi-span bridge structure under the effect of travelling seismic waves
1669(6)
P.L. Ng
J.S. Du
H. Zheng
Vulnerability assessment of heritage masonry building to mine blasting and earthquake
1675(6)
H.H. Tsang
E. Gad
J.L. Wilson
J.W. Jordan
Annualised collapse risk of soft-storey building with precast RC columns in Australia
1681(6)
H.H. Tsang
E. Lumantarna
N.T.K. Lam
J.L. Wilson
E. Gad
Analytical development of seismic retrofit technique for RC beam-column joint using single diagonal haunch
1687(8)
A. Zahihi
H.H. Tsang
E. Gad
J.L. Wilson
Infrastructure applications of FRP composites
Impact performance of concrete beams externally bonded with carbon FRP sheets
1695(6)
A. Remennikov
M. Goldston
M.N. Sheikh
Developing towards best natural fibre composite for structural applications-a review
1701(6)
M.R.R. Rasappagari
Y. Zhuge
Experimental investigations on bonded sleeve connection joining GFRP beams and columns
1707(6)
Z. Zhang
Y. Bai
F. Luo
C. Wu
X. Xiao
The influence of arching action on BFRP reinforced SCC deck slabs in Thompson bridge
1713(6)
Y. Zheng
S. Taylor
M. Sonebi
D. Robinson
Experimental study on mechanical behaviours of CFRP-steel composite plates under uniaxial tension
1719(6)
Y.L. Wang
Y.Y. Li
J.P. Ou
Q.F. Xu
Concrete-encased steel columns confined with large rupture strain FRP composites: Axial compression tests
1725(6)
L. Huang
S.S. Zhang
T. Yu
Z.Y. Wang
Hybrid FRP-concrete-steel multi-tube concrete columns: Stub column tests
1731(6)
T. Yu
C.W. Chan
L. Teh
J.G. Teng
Behavior of FRP confined ultrahigh-strength concrete columns under axial compression: An experimental study
1737(8)
S. Jiang
D. Fernando
J.C.M. Ho
M. Heitzmann
Sensors and instrumentation for infrastructural monitoring and assessment
Numerical simulation for real-time broken rail detection based on ultrasonic guided waves
1745(4)
Y.J. Ma
R. Lin
Y.L. Wen
J. Wu
H.W. Ma
Optical fibre sensor with 3D printed package configuration: A potential revolution of structural strain testing
1749(6)
Y. Wang
M. Vidakovic
R. Scott
Q. Wu
T. Sun
K.T.V. Grattan
Design and implementation of stress measurement system for steel structures members
1755(8)
J.B. He
Z.H. Li
J. Teng
Y. Wang
Material degradation for carbon fiber/phenolic composites subject to lightning strikes
1763(6)
P.A. Lendrum
C. Yang
K. Fu
L. Chang
L. Ye
The influence of white Gaussian noise on duffing system
1769(4)
J. Wu
Y. Wang
W.W. Zhang
H.W. Ma
Research on pipeline chaos detection based on ultrasonic guided wave
1773(4)
Y.L. Wen
H.W. Ma
A rail head inspection method based on ultrasonic guided wave testing
1777(6)
R. Lin
Y.L. Wen
Y.J. Ma
H.W. Ma
Structural stability vibration and optimization
Thermal buckling and free vibration of thermo-electro-mechanically loaded piezoelectric FG-CNTRC beams
1783(6)
H.L. Wu
S. Kitipornchai
J. Yang
A probabilistic approach for characterisation of multiple cracks in beams using guided waves
1789(8)
C.T. Ng
S. He
Postbuckling of shear deformable sandwich beam with a functionally graded porous metal foam core
1797(6)
D. Chen
S. Kitipornchai
J. Yang
Finite element analysis on free vibration of polymer composite beams reinforced With graphene platelets
1803(6)
N.H. Chu
C. Feng
J. Yang
S. Kitipornchai
Unified stochastic and non-stochastic free vibration analysis of structure
1809(6)
J. Feng
D. Wu
W. Gao
G. Li
Unified stochastic and nonstochastic nonlinear analysis of composite steel concrete arch structures
1815(6)
B. Wu
D. Wu
W. Gao
Y.L. Pi
An improved Nelder-Mead algorithm for optimization problem on structural damage detection
1821(6)
Z.P. Chen
L. Yu
Unified stochastic and non-stochastic static analysis of structures
1827(6)
D. Wu
W. Gao
S. Tangaramvong
Dynamic buckling analysis of beams including damping effect
1833(6)
K. Gao
D. Wu
W. Gao
C. Song
Operational modal analysis of a reinforced concrete factory building in Hong Kong
1839(8)
H.F. Lam
J.H. Yang
J. Hu
Cemented materials for construction
Performance of low calcium fly ash geopolymer concrete with steel furnace slag coarse aggregate
1847(6)
M. Khan
A. Castel
A. Akbarnezhad
S.J. Foster
M. Smith
Precision of existing hydration heat models for Portland cement in capturing the effects of supplementary cementitious materials and retarders
1853(6)
M. Gharehchaei
A. Akbarnezhad
H. Lazenby
A. Castel
R. Lloyd
S.J. Foster
Compressive strength of geopolymer pastes subjected to microwave curing
1859(6)
A. Graytee
J. Sanjayan
Behavior of high performance concrete two way slabs in punching shear for fixed edge condition
1865(6)
S.R. Hanchate
S. Chundupalle
V.G. Ghorpade
T.C. Venkata Reddy
Optimising the amounts of microsilica and nanosilica in concrete using response surface method
1871(4)
Z. Manzoor
S. Barbhuiya
F. Shaikh
D. Cheema
Challenges in the area of sustainable construction with microbially induced carbonate precipitation
1875(6)
M. Li
V. Achal
Wind loading, risk and vulnerability
Damage and losses in engineered buildings from wind and rain
1881(6)
D.J. Henderson
D. Smith
G.N. Boughton
D.J. Falck
J.D. Ginger
Tool to evaluate the resilience of buildings to severe wind events
1887(6)
G.N. Boughton
D.J. Falck
D.J. Henderson
Review of internal pressures in buildings
1893(6)
M.T. Humphreys
J.D. Ginger
D.J. Henderson
Correlation of peak wind loads at batten-truss connections
1899(6)
K.I. Parackal
J.D. Ginger
D.J. Henderson
Three-dimensional modelling of the timber-framed house to uplift loading
1905(6)
N. Satheeskumar
D.J. Henderson
J.D. Ginger
C.H. Wang
Inter-building and intra-building aerodynamic correlations of linked buildings
1911(6)
B.R. Kim
K.T. Tse
Y. Tamura
Cyclone damage assessment considering non-stationarity in cyclone actions
1917(6)
C. Wang
H. Zhang
Q. W. Li
Simulation of wind and wave loading via the spectral equal area random phase method
1923(8)
N. Haritos
Author Index
1931
Hong Hao received his BEng from Tianjin University, China, MSc and PhD degree from the University of California at Berkeley, USA. He is currently John Curtin Distinguished Professor, Director of Research Centre for Infrastructure Monitoring and Protection in Curtin University, Australia. He has published more than 350 journal papers in earthquake engineering, blast engineering and structural condition monitoring. Hong is the chief editor of International Journal of Protective Structures, and serves in the editorial board of another 10 journals.

Chunwei Zhang received his BEng from the Harbin Institute of Technology, China in 1999 (formerly known as the Harbin University of Civil Engineering and Architecture), MSc and PhD degree from Harbin Institute of Technology in 2001 and 2005, respectively. He is currently the Chair Professor of Civil Engineering in Qingdao University of Technology and the Leader of Structural Vibration Control Group in Shan Dong Province, China. His research interests include structural control and health monitoring, blast and impact, protective structures and disaster mitigation. Chunwei has published one book, one book chapter, over 100 referred journal and conference papers, and successfully applied five patents to various structures including a hybrid control system for the world tallest free-standing structure the Canton Tower.