| Preface |
|
v | |
|
Chapter 1 Powder Synthesis and Characterization |
|
|
|
Preparation of Protonic Conductor BaZr0.5Ce0.3Ln0.2O3-δ (Ln=Y, Sm, Gd, Dy) by Using a Solid State Reactive Sintering Method |
|
|
1 | (5) |
|
|
|
|
|
|
|
High Energy Milling of Zirconia: A Systematic Critical Review on the Phase Transformation |
|
|
6 | (6) |
|
|
|
|
|
|
|
Structural and Electrical Properties of (1-x)Pb(Zry Ti1-y)O3-xSm(Fe3+0.5, Nb5+0.5)O3 Ceramics Prepared by Conventional Solid State Synthesis and Sintered at Low Temperature |
|
|
12 | (6) |
|
|
|
|
|
|
|
Structural and Electrical Properties of Ca2+ Substituted Pb[ (Zr0.52Ti0.48)0,98 (Cr3+0.5, Ta5+0.5)0,02]0,96 P0,04 O3 Ceramics |
|
|
18 | (6) |
|
|
|
|
|
|
|
Soft Synthesis of FAU Nanozeolites and Microporous Membranes |
|
|
24 | (6) |
|
|
|
|
|
|
|
Characteristic and Sinterability of Alumina-Zirconia-Yttria Nanoparticles Prepared by Different Chemical Methods |
|
|
30 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Ultradispersed Powdery Y2O3-Bi2O3-ZnO Composition with High Chemical Homogeneity for Fine-Grained Ceramics |
|
|
36 | (6) |
|
|
|
|
|
|
|
Preparation of Highly-Dispersed Powders of Cobalt, Nickel, Molybdenum and Tungsten Oxides by Modified Sol-Gel Technique |
|
|
42 | (6) |
|
|
|
|
|
Development of Highly Dispersed Hybrid Nanoalumina with the Sol-Gel Method |
|
|
48 | (6) |
|
|
|
|
|
|
|
Study of Gamma Alumina Synthesis -- Analysis of the Specific Surface Area |
|
|
54 | (7) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Synthesis and Characterization of Nanocomposite HA/α-Al2O3 Sol-Gel Powders for Biomedical Applications |
|
|
61 | (6) |
|
|
|
|
|
|
|
|
|
Effect of Ammonium Sulfate on Morphology of Y2O3 Nanopowders Obtained by Precipitation and its Impact on the Transparency of YAG Ceramics |
|
|
67 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Segregation and Color Change on (Cr, Ca) Codoped Nanocrystalline Tin Dioxide |
|
|
73 | (6) |
|
|
|
|
|
|
|
Microstructural Characterization of Activated Carbon Obtained from Waste Tires |
|
|
79 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chapter 2 Colloidal Processing, Shape Forming and Compaction Mechanisms |
|
|
|
Transparent Tetragonal Zirconia Ceramics by Colloidal Processing of Nanoparticle Suspension |
|
|
85 | (6) |
|
|
|
|
|
Composition -- Property Relations in Shear Thickening Fluids |
|
|
91 | (7) |
|
|
|
|
|
Thick Film Processing Challenges in the Realisation of a Co-Fired Solid Oxide Fuel Cell Roll |
|
|
98 | (7) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A Mixed SVD-Neural Network Approach to Optimal Control of Ceramic Mould Manufacturing in Lost Wax Cast Processes |
|
|
105 | (8) |
|
|
|
|
|
|
|
|
|
Manufacturing of Porous Ceramic Spheres Using Calcium Phosphates, by a Mechanical Method without Additives or Binders |
|
|
113 | (5) |
|
|
|
|
|
|
|
|
|
A.H. de Almeida Bressiani |
|
|
Chapter 3 Sintering and Related Phenomena |
|
|
|
In Situ Platelet Reinforcement of Alumina and Zirconia Matrix Nanocomposites -- One Concept, Different Reinforcement Mechanisms |
|
|
118 | (8) |
|
|
|
|
|
Sol-Gel Derived Mullite-Gahnite Composite |
|
|
126 | (6) |
|
|
|
|
|
|
|
|
|
|
|
3D Phase-Field Simulation and Characterization of Microstructure Evolution during Liquid Phase Sintering |
|
|
132 | (7) |
|
|
|
|
|
|
|
|
|
Influence of Alumina Addition on Low Temperature Degradation of Y2O3-Coated Powder Based Y-TZP Ceramics |
|
|
139 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Effect of Different Sintering Processes on Microstructure of Alumina Ceramics |
|
|
145 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Mechanical Characterization of Conventional and Non-Conventional Sintering Methods of Commercial and Lab-Synthesized Y-TZP Zirconia for Dental Applications |
|
|
151 | (6) |
|
|
|
|
|
|
|
|
|
|
|
Sintering of Al2O3-TiO2 Mixtures Obtained by High-Energy Ball Milling |
|
|
157 | (5) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Effect of Particle Size of ZrO2(Y2O3) Powders on the Shrinkage of the Sintered Substrate with Coloring Gradient |
|
|
162 | (7) |
|
|
|
|
|
|
|
|
|
|
| Keyword Index |
|
169 | (2) |
| Author Index |
|
171 | |
