Muutke küpsiste eelistusi

Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and Actuators 2010 ed. [Kõva köide]

Edited by , Edited by , Edited by
Teised raamatud teemal:
  • Kõva köide
  • Hind: 187,67 €*
  • * hind on lõplik, st. muud allahindlused enam ei rakendu
  • Tavahind: 220,79 €
  • Säästad 15%
  • Raamatu kohalejõudmiseks kirjastusest kulub orienteeruvalt 2-4 nädalat
  • Kogus:
  • Lisa ostukorvi
  • Tasuta tarne
  • Tellimisaeg 2-4 nädalat
  • Lisa soovinimekirja
Teised raamatud teemal:
A NATO Advanced Research Workshop (ARW) entitled “Advanced Materials and Technologies for Micro/Nano Devices, Sensors and Actuators” was held in St. Petersburg, Russia, from June 29 to July 2, 2009. The main goal of the Workshop was to examine (at a fundamental level) the very complex scientific issues that pertain to the use of micro- and nano-electromechanical systems (MEMS and NEMS), devices and technologies in next generation commercial and defen- related applications. Micro- and nano-electromechanical systems represent rather broad and diverse technological areas, such as optical systems (micromirrors, waveguides, optical sensors, integrated subsystems), life sciences and lab equipment (micropumps, membranes, lab-on-chip, membranes, microfluidics), sensors (bio-sensors, chemical sensors, gas-phase sensors, sensors integrated with electronics) and RF applications for signal transmission (variable capacitors, tunable filters and antennas, switches, resonators). From a scientific viewpoint, this is a very multi-disciplinary field, including micro- and nano-mechanics (such as stresses in structural materials), electronic effects (e. g. charge transfer), general electrostatics, materials science, surface chemistry, interface science, (nano)tribology, and optics. It is obvious that in order to overcome the problems surrounding next-generation MEMS/NEMS devices and applications it is necessary to tackle them from different angles: theoreticians need to speak with mechanical engineers, and device engineers and modelers to listen to surface physicists. It was therefore one of the main objectives of the workshop to bring together a multidisciplinary team of distinguished researchers.

Proceedings of the NATO Advanced Research Worskhop on Advanced Materials and Technologies for Micro/Nano-Devices, Sensors and ActuatorsSt. Petersburg, Russia29 June - 2 July 2008
MEMS/NEMS Technologies and Applications.- History of Early Research on
MEMS in Russia (U.S.S.R.).- Challenges of Complete CMOS/MEMS Systems
Integration.- MEMS for Practical Applications.- Nanochip: A MEMS-Based
Ultra-High Data Density Memory Device.- Low Cost Silicon Coriolis Gyroscope
Paves the Way to Consumer IMU.- Microwave and Millimetre Wave Devices Based
on Micromachining of III-V Semiconductors.- Monocrystalline-Silicon Microwave
MEMS Devices.- Three-Dimensional Photonic Crystals Based on
Opal-Semiconductor and Opal-Metal Nanocomposites.- MEMS Device and
Reliability Physics.- Pull-in Dynamics of Electrostatically Actuated Bistable
Micro Beams.- Path Following and Numerical Continuation Methods for
Non-Linear MEMS and NEMS.- The Impact of Dielectric Material and Temperature
on Dielectric Charging in RF MEMS Capacitive Switches.- Advanced Processes
and Materials.- Development of DRIE for the Next Generation of MEMS Devices.-
Low-Temperature Processes for MEMS Device Fabrication.- High-Temperature
Stable AuSn and CuSn Interconnects for 3D Stacked Applications.- 3D
Integration of MEMS and IC: Design, Technology and Simulations.-
Low-Frequency Electronic Noise in the Back-Gated and Top-Gated Graphene
Devices.- Modeling of Dry Etching in Production of MEMS.- XRD and Raman Study
of Low Temperature AlGaAs/GaAs (100) Heterostructures.- Internal Stresses in
Martensite Formation in Copper Based Shape Memory Alloys.- Sensors.- Smart
Sensors: Advantages and Pitfalls.- Vertically Integrated MEMS SOI Composite
Porous Silicon-Crystalline Silicon Cantilever-Array Sensors: Concept for
Continuous Sensing of Explosives and Warfare Agents.- Integration of Diverse
Biological Materials in Micro/Nano Devices.- Force Sensing Optimization and
Applications.- Using ParametricResonance to Improve Micro Gyrsocope
Robustness.