Muutke küpsiste eelistusi

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6 [Kõva köide]

Volume editor (University of Illinois at Urbana-Champaign), Edited by , Volume editor , Edited by (NASA Glenn Research Center), Edited by
  • Formaat: Hardback, 192 pages, kõrgus x laius x paksus: 241x160x18 mm, kaal: 454 g
  • Sari: Ceramic Engineering and Science Proceedings
  • Ilmumisaeg: 16-Feb-2016
  • Kirjastus: Wiley-American Ceramic Society
  • ISBN-10: 1119211654
  • ISBN-13: 9781119211655
Teised raamatud teemal:
Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6Suurem pilt
  • Formaat: Hardback, 192 pages, kõrgus x laius x paksus: 241x160x18 mm, kaal: 454 g
  • Sari: Ceramic Engineering and Science Proceedings
  • Ilmumisaeg: 16-Feb-2016
  • Kirjastus: Wiley-American Ceramic Society
  • ISBN-10: 1119211654
  • ISBN-13: 9781119211655
Teised raamatud teemal:
Püsilink: https://www.kriso.ee/db/9781119211655.html
The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.
Preface ix
Introduction xi
ADVANCED PROCESSING AND MANUFACTURING
Development of High Temperature Joining and Thermomechanical Characterization Approaches for SiC/SiC Composites
3(10)
Michael C. Halbig
Mrityunjay Singh
Jerry Lang
Microstructural Observation of Interfaces in Diffusion Bonded Silicon Carbide Ceramics by TEM
13(8)
Hiroshi Tsuda
Shigeo Mori
Michael C. Halbig
Mrityunjay Singh
Rajiv Asthana
Preparation and Characterization of Rb-SiC Ceramics Fabricated from Phenolic Resin/SiC
21(6)
Akihiro Shimamura
Mikinori Hotta
Tatsuki Ohji
Naoki Kondo
New Combined Method of MPS and FEM for Simulating Friction Stir Processing
27(10)
Hisashi Serizawa
Fumikazu Miyasaka
Novel Visualizing Technique of the Tips of the Cracks for Indentation Fracture Resistance Method
37(8)
H. Miyazaki
Y. Yoshizawa
Slip-Casting by Water-Absorbing Resin Mold Enables Crack-Free Ceramic Molding System and Products with Partially Different Thicknesses
45(10)
Akio Matsumoto
Influence of Lanthanoid Dopant and N/O Substitution on the Electronic Structure and Luminescent Properties of Lanthanum Silicon Oxynitride Phosphors
55(10)
I.A.M. Ibrahim
Z. Lences
L. Benco
P. Sajgalik
Effect of Ti3SiC2 Particulates on the Mechanical and Tribological Behavior of Sn Matrix Composites
65(10)
T. Hammann
R. Johnson
M. F. Riyad
S. Gupta
Field Assisted Sintering of Silicate Glass-Containing Alumina
75(8)
Mattia Biesuz
Vincenzo M. Sglavo
Modeling the First Activation Stages of the Fe(hfa)2TMEDA CVD Precursor on a Heated Growth Surface
83(8)
Gloria Tabacchi
Ettore Fois
Davide Barreca
Giorgio Carraro
Alberto Gasparotto
Chiara Maccato
Development of High Aspect Ratio Hexagonal Boron Nitride Filler by Mechanical Exfoliation
91(10)
Yuichi Tominaga
Kimiyasu Sato
Daisuke Shimamoto
Yusuke Imai
Yuji Hotta
Preparation and Characterization of Nanostructured Films: Study of Hydrophobicity and Antibacterial Properties for Surface Protection
101(14)
M. Barberio
S. Veltri
E. Sokullu
F. Xu
M.A. Gauthier
P. Antici
ADDITIVE MANUFACTURING AND 3D PRINTING
3-D Printing and Characterization of Polymer Composites with Different Reinforcements
115(8)
Anton Salem
Mrityunjay Singh
Michael C. Halbig
Additive Manufacturing of Drainage Segments for Cooling System of Crucible Melting Furnaces
123(10)
Miranda Fateri
Andreas Gebhardt
Georg Renftle
Additive Manufacturing of Silicon Carbide-Based Ceramics by 3-D Printing Technologies
133(12)
Shirley X. Zhu
Michael C. Halbig
Mrityunjay Singh
Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications
145(6)
Mrityunjay Singh
Michael C. Halbig
Joseph E. Grady
Application of Selective Separation Sintering in Ceramics 3D Printing
151(8)
J. Zhang
B. Khoshnevis
Contour Crafting of Advanced Ceramic Materials
159(10)
Mahmood Shirooyeh
Mohammadaref Vali
David Shackleford
Payman Torabi
Paul W. Rehrig
Oh-Hun Kwon
Behrokh Khoshnevis
Author Index 169
Tatsuki Ohji is a Prime Senior Research Scientist of National Institute of Advanced Industrial Science and Technology (AIST) and a Designated Professor in the Graduate School of Science and Engineering, Meijo University, Japan. He has authored or coauthored more than 330 peer-reviewed papers and 12 book chapters, edited 30 book volumes, chaired or co-chaired more than 30 international conferences and symposia, and hold more than 40 patents. Fellow of the American Association for the Advancement of Science (AAAS), the American Ceramic Society and ASM International, and Academician of the World Academy of Ceramics, he has received numerous awards including ECD Bridge Building Award of the American Ceramic Society, Academic Achievement Award of the Ceramic Society of Japan, IIM Lectureship Award of ASM International, Lee Hsun Lecture Award of IMR Chinese Academy of Sciences, and Distinguished Research Achievement Award of the Japan Society of Powder and Powder Metallurgy.