Muutke küpsiste eelistusi

Advances in Grinding and Abrasive Technology XVI [Pehme köide]

Edited by , Edited by , Edited by
  • Formaat: Paperback / softback, 563 pages, kõrgus x laius x paksus: 240x170x28 mm, kaal: 1100 g, Illustrations, unspecified
  • Sari: Key Engineering Materials
  • Ilmumisaeg: 22-Nov-2011
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 3037852070
  • ISBN-13: 9783037852071
Teised raamatud teemal:
Advances in Grinding and Abrasive Technology XVISuurem pilt
  • Formaat: Paperback / softback, 563 pages, kõrgus x laius x paksus: 240x170x28 mm, kaal: 1100 g, Illustrations, unspecified
  • Sari: Key Engineering Materials
  • Ilmumisaeg: 22-Nov-2011
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 3037852070
  • ISBN-13: 9783037852071
Teised raamatud teemal:
Püsilink: https://www.kriso.ee/db/9783037852071.html
Volume is indexed by Thomson Reuters CPCI-S (WoS). The papers were selected for this volume on the basis of their quality and relevance to the topic of abrasive technology. The volume presents the reader with recent advances in the field of abrasive technology; including the mechanics and control of abrasive processes, modeling, simulation and optimization of abrasive processes, green and clean production in abrasive processes, measurement and surface-quality assessment, cooling and coolants, polishing, wheel-truing and dressing, novel abrasive techniques and novel machining techniques. It will therefore be of great value to production and research engineers, research students and academics working in the field.
Preface v
Organizing Committees vi
Surface and Subsurface Damages of CdZnTe Substrates Ground by Diamond Grinding Wheel
1(5)
S. Gao
R.K. Kang
Y. Li
H. Gao
Research on Micro-Grinding Method and Surface Quality
6(5)
Y.D. Gong
Y.M. Liu
J. Cheng
J.F. Zhang
The Study of Wear Flat Effect on the Single Grain Micro-Cutting Performance in Superabrasive Grinding from a Simulation Perspective
11(5)
X.K. Li
L. Yan
M.J. Yi
Y.M.K. Rong
Temperatures in Grinding Cemented Carbide (YT30) with a Vacuum Brazed Diamond Wheel
16(8)
Y.J. Zhan
Y. Li
H. Huang
X.P. Xu
Investigation on the Workpiece Surface Residual Stress in High Efficiency Deep Grinding with Ultra High Wheel Speeds
24(5)
J. Tan
D.J. Stephenson
X.M. Sheng
Ultra-Precision Fabrication of Small-Size Aspherical Glass Lens Mold
29(5)
F.J. Chen
S.H. Yin
J.W. Yu
K.J. Zhu
Y. Wang
Study on Grinding Machinability of Titanium Alloy Using SiC Abrasive
34(5)
G.Q. Guo
X.H. Zheng
Z.Q. Liu
Q.L. An
M. Chen
Removal Mechanism of Titanium Alloy Ti6A14V Based on Single-Grain High Speed Grinding Test
39(5)
L. Tian
Y.C. Fu
W.F. Ding
J.H. Xu
H.H. Su
Single Grit Scratching and Diamond Grinding on Optical Glasses
44(5)
Q.L. Zhao
L.L. Zhao
B. Guo
Study on Residual Stress Distribution in Surface Grinding
49(5)
G.C. Wang
C.L. Hua
J.D. Liu
H.J. Pei
G. Liu
Influences of Grinding Parameters on Flexural Strength in the Grinding of Li-Spinel Ferrites with Electroplated Diamond Wheel
54(4)
L.P. Sun
Y.G. Wang
Y. Yang
X.R. Yu
B. Lin
Research on the Ductile Chip Formation in Grinding of Brittle Materials
58(5)
Y.F. Peng
Z.Q. Liang
Y.B. Wu
Y.B. Guo
T. Jiang
X. Chen
Experimental Investigation of White Layer in Grinding of AISI 52100 Annealed Steel
63(7)
X.M. Huang
Z.X. Zhou
W. Li
Finite Element Simulation of Temperature Field during Grinding of SiCp/Al Composites
70(5)
C.Y. Zhang
L. Zhou
S.T. Huang
The Grinding Temperature of Alumina Ceramic in High Speed Deep Grinding (HSDG)
75(5)
G.Z. Xie
X.M. Sheng
J. Tan
Z.T. Shang
Y. Wu
Force and Energy in Grinding Zirconia Ceramics by Brazed Monolayered Diamond Wheels
80(4)
S.S. Li
J.H. Xu
Y.C. Fu
H.J. Xu
Investigation of Grinding Ti-6A1-4V under Minimum Quantity Lubrication (MQL) Condition
84(5)
Z.Q. Liu
G.Q. Guo
X.H. Zheng
Q.L. An
M. Chen
Experimental Research on Surface Integrity with Less or Non Fluid Grinding Process
89(5)
S.C. Xiu
C.X. Chao
S.Y. Pei
Study on Depth and its Uniformity of 65Mn Steel Grind-Hardened Layer
94(5)
J.Z. Zhuang
J.D. Liu
Y.Z. Zhang
The Inner Hole Grinding Surface Roughness Analysis of Zirconia Ceramics Electric Spindle
99(5)
F. Lu
S.C. Chen
S.H. Li
K. Zhang
Y.H. Wu
High-Speed Grinding for Superalloy
104(4)
B.F. Feng
Q.F. Gai
Z. Lei
Z.L. Su
A Study of Machining Characteristics of YG8 in High Speed Grinding
108(5)
J.W. Yu
M. Cheng
S.H. Yin
G.Z. Xie
X.L. Zhou
The Experimental Study on Characteristics of Low-Temperature Grinding of Ceramic Hollow Ball Super-Hard Composite Abrasive
113(3)
Z.M. Cui
J.P. Kong
X.P. Yang
L. Du
Effect of Arraying Patterns of Diamond Grits on the Grinding Forces of Mono-Layer Brazed Diamond Tool
116(5)
F.L. Zhang
M.J. He
Y.M. Zhou
H.P. Huang
J.M. Fan
Experimental Research of Grinding TC4 Titanium Alloy Using Green Silicon Carbide Wheel
121(5)
X.H. Zheng
Z.Q. Liu
G.Q. Guo
Q.L. An
M. Chen
Experimental Study on Microstructure Evolution in AISI D2 Steel Surface Grinding
126(5)
L. Yan
F. Jiang
Y.M.K. Rong
Surface Strain and Roughness Change of Aluminum Block Ground by Fixed Abrasives
131(4)
Q.L. Han
H.J. Zhao
Experimental Study of Grinding Characteristics on SiCp/AI Composites
135(5)
L. Zhou
S.T. Huang
X.L. Yu
Experiment Investigation of the Influence Factors on Surface Grinding Temperature
140(5)
C. Mao
H.F. Zou
Z.X. Zhou
Performance of Laser Brazing Diamond Grinding Wheel in Face Grinding
145(4)
Z.B. Yang
L.M. Zhang
J.H. Xu
G.L. Zhao
Three-Dimensional Simulation of Wheel Topography
149(6)
Q. Feng
Q. Wang
C.Z. Ren
Comparative Study on the Tribological Performance of HFCVD Diamond and DLC Films under Water Lubricating Condition
155(5)
B. Shen
F.H. Sun
Z.M. Zhang
Development of a Multiple Micro Diamond Wheel-Tools
160(4)
S.T. Chen
Y.C. Lai
First Principle Calculations on Structures and Properties of Diamond-Like B2(CN)3 Compounds
164(5)
D.X. Li
D.L. Yu
J. Lu
Influence of Pore-Forming Agent on the Performance of Resin Bond Diamond Grinding Wheel in Back-Grinding Silicon Wafers
169(6)
K.H. Li
Q. Guo
M.Y. Liu
Y.J. Zhao
D.L. Shi
Particle Flow Simulation on Semi-Fixed Abrasive Tool Processing
175(5)
P. Zhao
W.F. Yao
Q.F. Deng
D. Liu
J.L. Yuan
Effect of Ultrasonic on Coating Performances of Electroplated Diamond Tools
180(4)
Y.G. Wang
B. Lin
Y.H. Liu
A.B. Yu
Finite Element Analysis of Stress Distributions on the Diamond Pick
184(5)
S.T. Huang
L. Zhou
J. Li
Experiment Study on Abrasives Performance on Vitrified CBN Wheel
189(6)
X.L. Liu
Z.R. Pang
W.S. Wang
Manufacturing and Experimental Research of Fine Grain Diamond Grinding Wheel Based on Magnetic Field Controlling
195(4)
S.H. Yin
M. Wang
J.W. Yu
F.J. Chen
Y. Wang
Investigation of Interface Microstructure of Diamond and Ti Coated Diamond Brazed with Cu-Sn-Ti Alloy
199(5)
Y. Chen
H.H. Su
Y.C. Fu
Z.C. Guo
Research on the CAD Technology of Resin-Bonded Diamond Abrasive Tool Based on Quality Control
204(5)
N.B. Liu
Z.Y. Wu
G.Y. Li
N. Weng
Simulation of Grinding Wheel with Random Three-Dimensional Abrasive and Microporous Bond
209(6)
J.Q. Zhang
P. Guan
C. Su
T.B. Yu
W.S. Wang
Recovery of Electroplated Diamond Tool with Thermal Shock Method
215(5)
A.B. Yu
L. Wu
B.Y. Gao
Self-Sharpening Abrasive Composite Bulks with PCBN Grains
220(5)
B. Zhang
W.F. Ding
J.H. Xu
Q. Pan
Y.J. Shi
Research on the Milling Toughness of Black Silicon Carbide and the Repeatability of the Testing Results
225(4)
M. Liu
S.J. Jiang
Performance of Monolayer Brazed CBN Wheels Manufactured with Rare Earth Lanthanum Modified Ag-Cu-Ti Filler
229(4)
C.Y. Yang
J.H. Xu
W.F. Ding
Y.C. Fu
H.H. Su
Surface Characterization of Silicon Wafers Polished by Three Different Methods
233(5)
G.Q. Hu
J. Lu
J.Y. Shen
X.P. Xu
Study on Compound Machining of Polyurethane Polishing Pad and Cluster Abrasive Brush Based on MR Effect
238(5)
M. Li
Q.S. Yan
J.B. Lu
J.F. Chai
Study on Lubricating Behavior in Chemical Mechanical Polishing
243(5)
J.X. Su
J.X. Du
X.L. Liu
H.N. Liu
R.K. Kang
Processing of Lapping Track in Dual Rotated Plates Eccentric Lapping Mode
248(5)
W. Yu
D. Liu
J.L. Yuan
Q.F. Deng
W.F. Yao
C.Y. Jin
Research on Subsurface Damage After Abrasives and Fixed-Abrasive Lapping of K9 Glass
253(4)
J. Li
P. Gao
Y.W. Zhu
B. Li
Y.L. Sun
D.W. Zuo
Study on Machining Process of Lapping for BK7 Glass
257(6)
C.Y. Wang
W.S. Luo
C.H. He
Y.X. Song
Finishing of Display Glass for Mobile Electronics Using 4S-4μm 3M™ Trizact™ Diamond Tile Abrasive Pads
263(5)
T.K. Na
L.B. Zheng
Theoretic and Experimental Study on the Accuracy of Gears by Generative Electrochemical Mechanical Finishing
268(5)
G.B. Pang
D.M. Li
W.J. Xu
X. Adayi
L. Yang
J.J. Zhou
Research on Tests of Magnetic Abrasive Finishing by Sintering Method
273(5)
G.B. Liao
M.M. Zhang
Y.J. Li
Z.Q. Liu
Y. Chen
Investigation of Elastic Deformation Machining Method for Aspheric Surface Generation
278(5)
D.N. Nguyen
J.L. Yuan
B.H. Lv
Z. Wu
Ultra Smooth Polishing Research Based on the Cluster Magnetorheological Effect
283(6)
Z.C. Wu
Q.S. Yan
Z.W. Bai
L.Y. Kong
J.F. Chai
Investigation of a New Kind of Magnetic Abrasive Grains Used for Finishing Inner-Hole Surfnce
289(4)
Y.H. Ding
X.G. Yao
G. Ya
P. Lu
Research on Material Removal Characteristics in Plane Lapping Method for Aspherical Surface Using Elastic Deformation
293(5)
Z. Wu
J.L. Yuan
B.H. Lv
D.N. Nguyen
Development of a New Magnetic-Electrochemical Compound Polishing Tool
298(5)
L.M. Shi
J.N. Yong
J. Liu
E.L. Liu
Research on Precision Mirror Machining Technology for W-Mo Alloy
303(5)
J.L. Guan
H.W. Lu
X.H. Xiao
Y.C. Wu
Z.D. Chen
Comparative Research of Several Grinding Media Based on Electro-Magnetic Barrel Finishing Method
308(4)
K.Q. Yu
F. Yan
G.B. Liao
Y. Chen
Flow State Analysis on Abrasive Motion of Centrifugal Grinding under Different Working Conditions
312(5)
H.C. Wang
D.L. Zhang
X. Fang
Research on Surface Grinding and Polishing Process of Precise Hydraulic Couples
317(5)
W.H. Wang
L. Teng
B.L. Zhao
Q.Q. Yang
J.J. Wang
B. Tong
The Mechanical Polishing Research on the Surface of WC-Co Cemented Carbide Based on ELID Grinding
322(5)
J.L. Guan
Y.C. Wu
H.W. Lu
X.H. Xiao
W.C. Wang
Study of Abrasive Water Jet Polishing Technology
327(5)
C.L. Che
C.Z. Huang
J. Wang
H.T. Zhu
Surface Quality Investigation of Nanoparticle Colloid Hydrodynamic Cavitation Jet Polishing Technology
332(5)
Y. Zhang
X. Wang
F.H. Zhang
M. Zhou
Study on the Efficient Processing Technology of Countertop Board with Disc Circular Saw Blades
337(5)
S. Gao
J.S. Zhang
Z. Wang
Z.M. Zhang
T. Li
Material Fracture Character of Marble Processing by Single Diamond Tools
342(5)
S.S. Hu
C.Y. Wang
Y.N. Hu
C.B. Pan
X.Q. Lu
Investigation of High Performance Diamond Brazed Saw for Cutting AZ31 Magnesium Alloy
347(5)
B.J. Ma
X. Cai
L.A. Li
Machining Mechanism of Diamond Fibers Cutter
352(5)
G.F. Zhang
Y.Q. Tan
B. Zhang
Z.H. Deng
The Effects of Machining Parameters on the Position of Resultant Force In Sawing of Granite
357(4)
C.F. Fang
X.P. Xu
Study on the Wear Topography of Diamond Endless Wire Saw when Cutting Granite
361(5)
W. Gao
J.T. Zhang
J.Y. Dunn
Research on Finite Element Simulation and Experiment of Temperature Field in Surface Cutting Used a New PDC Cutter
366(5)
Z.H. Deng
Z. Pan
Q.P. Wu
G.F. Zhang
B. Zhang
Drilling C/E Composites with Electroplated Diamond Abrasive Tool and its Damage Evaluation Method
371(5)
Q. Wen
H. Gao
D. Zhao
D.M. Guo
Mechanism Analysis of High Efficiency Axial Turn-Grinding of Engineering Ceramics
376(5)
X.L. Tian
F. Guo
Y.T. Mao
B.G. Zhang
J.Q. Wang
S. Zhang
Study on Bit Body Materials Made of Tungsten Carbide and Steel Shot
381(5)
J.L. Peng
L.C. Duan
H. Shi
S.L. Xu
3D Noise Generation and Removal of Measured Grinding Wheel Topogrnphy Using a White Light Interferometer
386(5)
J. Xie
F. Zhang
H.F. Xie
The Identification of Amplitude and Phase in Imbalance Mass of Grinding Wheel
391(5)
S.X. Yuan
Z.L. Guan
Spherical Head Surface Roughness Analysis and Experimental Research Based on the Abrasive Belt Grinding
396(6)
Y. Zhang
Y. Huang
Z. Huang
Design of Temperature Gathering System Based on Spray Cooling Grinding Experiment
402(5)
J.L. Ren
C.Y. Zhang
Y.W. Li
J.H. Yu
Study of the on-Line Testing Method for the Abrasive Belt Follow-up Grinding of the Crankshaft Crankpin
407(6)
L. Zhang
Y. Huang
Y.J. Wang
M. Zhang
Influence of Ultrasonic Assistance on Material Removal Mechanism of Hard and Brittle Materials Based on Single-Point Scratch
413(6)
F. Jiao
B. Zhao
Development of a Two-Dimensional Ultrasonic Vibration Assisted Machining Technology with Tool Vibration
419(4)
Z.Z. Wang
Y.B. Guo
Y.B. Wu
Finite Element Analysis of Ti-6A1-4V Alloy Crater Geometry for EDM Based on a Single Discharge
423(6)
Y. Wang
J.H. Xu
F. Gao
Experimental Study of the Relationship between Tool Rod Parameters and Vibration Parameterson Ultrasonic Grinding (Wheel Vibration)
429(4)
Z.D. Li
B. Zhao
Research on Dynamic Grinding Force in Ultrasonic Honing Chatter
433(5)
X.J. Zhu
J.Q. Wang
Q. Chen
Z.M. Lu
Precision Honing of Stainless Steel Valve Core
438(5)
Z.G. Dong
C.W. Kang
L. Xu
Research on Surface Roughness of Nano-Compositc Ceramics under Multi-Frequency Ultrasonic Grinding and Dressing
443(4)
J.X. Xue
B. Zhao
Research on Surface Residual Stress of Nano-Composite Ceramics under Multi-Frequency Ultrasonic Grinding and Dressing
447(5)
B. Zhao
J.X. Xue
M.L. Zhao
Experimental Research on the Abrasive Belt Grinding Turbine Blades Material 1Cr13 Stainless Steel
452(5)
H.L. Wu
Y. Huang
Z. Huang
G.J. Cheng
Research on the Mechanism of Coordinate Polishing Crankshaft Crankpin with Abrasive Belt
457(5)
M. Zhang
Y. Huang
L. Zhang
The Experimental Investigation of Stone Wear in Honing
462(6)
Q. Wang
Q. Feng
Q.F. Li
C.Z. Ren
Study on Jet Formation and Modeling for High Pressure Abrasive Water-Jet
468(5)
Z.W. Liu
C.Z. Huang
H.T. Zhu
H.L. Liu
B. Zou
The Vibration Detection System of CNC Machine Tools and the Application of Spindle Test
473(5)
Y.H. Wu
L.W. Rao
D.H. Zhao
K. Zhang
Study of the Floor Typed Abrasive Water Jet Spatial Machining Robot
478(4)
R.G. Hou
C.Z. Huang
H.T. Zhu
H.L. Liu
B. Zou
Research on Dynamic Balance of Grinding Wheel Spindle
482(4)
Q.Y. Zhou
Z.X. Zhou
Y. Li
Analysis of Ultrasonic System in Acoustic Levitation Polishing
486(4)
W.F. Wang
P.F. Gao
D.H. Wen
Numerical Investigation into Spindle System Stiffness of High-Speed Grinder
490(5)
C.H. Li
W. Mao
Y.C. Ding
Research on Function Simulation of Web-Based Virtual Grinding Machine Tool
495(5)
T.B. Yu
J.Q. Zhang
W.S. Wang
A Study on the Manufacturing System or the Axes Linked Ultra-Precision Grinding of Aspheric Surface
500(5)
L.J. Li
Y. Jiang
F.H. Zhang
Finite Element Analysis on Dynamic Characteristics of Hybrid Bearing Spindle System
505(5)
P. Guan
M. Li
B.C. Li
T.B. Yu
W.S. Wang
The Structure Analysis or High Efficiency Grinding Automation Equipment for Nuclear High-Pressure Vessel
510(5)
D.W. Zhu
Y. Huang
Z. Huang
Research on Application of NC Polish-Grinding of Valve Stem and Instantaneous Compensation of Grinding Wheel
515(6)
Y.L. Yu
W.M. Li
Z.Y. Miao
D.Q. Yang
The Assembly Precision Debugging of Piliar of the Alien Stone Turning-Milling Compound Machining Center (HTM50200)
521(5)
K. Zhang
Z.X. Cui
D.H. Zhao
L.W. Rao
Y.H. Wu
China's Diamond in the Worid Market
526(7)
Z.H. Li
B. Zhao
L. Li
J. Wong
Keyword Index 533(4)
Author Index 537