Ballistic Protection [Pehme köide]

Preface
Chapter 1: Steel and Alloys for Armouring
Effect of Thickness Hardened SKD 11 Modified Steel on the 7.62 mm Ballistic
Performance
The Influence of the Microstructure of an HHA Steel on the Formation of
Adiabatic Shear Bands, after High Deformation Rates
Computational Approches for Ballistic Impact Response of Stainless Steel 304
Microstructural Assessment of Nanobainite Formed in a Chemically
Heterogeneous High-Carbon Al-Si Alloyed Steel
Ballistic Testing Simulation of Ultra-High Strength Steel Water Layer
Sandwich Structure
Penetration Damaging Behavior of ATI425 Titanium Alloy
Experimental Study on Welding Process of TC4 Titanium Alloy with Different
Welding Wires
Penetration Damaging Behavior of TB17 Titanium Alloy
Promising Ballistic Behavior of CoCrFeMnNi High Entropy Alloy
Influence of the Titanium Nitride Deposition Duration during Vacuum
Ion-Plasma Treatment on the Resistance of Coatings in a Hydrogen Atmosphere
Numerical Simulation of Ti-Based Metallic Glasses as Whipple Shield Bumper by
Smoothed Particle Hydrodynamics Methods
Chapter 2: Composites
Influence of Degradation on the Ballistic Behavior of Aramid Fabric
Reinforced Polymeric Armor Composites
Simulation of Accelerated Ageing Conditions on Ballistic Resistance of
Dyneema® Polyethylene Composites
Manufacturing of Novel Cork-STF Composites Designed for Impact Energy
Absorption
Research of the Behavior of Composite Panels under Impact Loads and the
Creation of Reliable Protection of Armored Vehicles
Ballistic Performance Evaluation of Kevlar-Glass Fibre Hybrid Composite
Laminate against Medium Velocity Impact
Numerical and Experimental Study of Multi-Layer Armors for Personal
Protection
Numerical Analysis of SiC and UHMWPE Composite Ballistic Plates against 0.5
Caliber BMG Projectile
The Effect of Filler and Fiber Type on the Behavior of Body Armor Composite
Numerical Study of Ballistic Performance in Level III SiC Ceramic
Multilayered UHMWPE Ballistic Plates
Development of Graphene-Based Functional Coating for the Surface Modification
of Textiles
Experimental and Numerical Study of the Hybridisation Effect on the
High-Velocity Impact Resistance of Thermoplastic Composites Based on Aramid
Fabrics
Simplified Approach to Verification of Numerical Models for Deformation and
Fracture Analysis of Structural Composite Subjected to High-Velocity Impact
Experimental Study of Tensile Preloading Influence on the Mechanical
Behaviour of Pseudo-Ductile Hybrid Composite under High-Velocity Impact
Natural Fiber Reinforced Composites as Bulletproof Panel Materials
Ballistic Performance of Epoxy-Ramie Composite - SiC Layered Body Armor Using
Finite Element Analysis
Advanced Body Armor Utilizing Shear Thickening Fluid Based on Nanosized
Silica Particles
Experimental and Modeling Study on High Velocity Penetration of a
Carbon/Epoxy Composite Laminate
Study on Ballistic Characteristics of Glass-Epoxy-Rubber Sandwiches
Experimental Study of Kerf Surface Finish of Abrasive Water-Jet Cutting of
Kevlar Fiber-Reinforced Polymers
Shear Thickening Fluids, Nano-Polymer Materials and their Application Methods
for Textile Substrates
Improvement of Tensile and Flexural Properties of Fiber Pre-Stressing
Composite by Using Nano Graphene
Chapter 3: Ceramics and Ceramic Matrix Composites
Modeling and Optimization of the Fabrication of Al2O3- Based Ceramocomposites
Reinforced with Carbon Nanotubes
Features of Glass Plate Hardening by the Ion Exchange Method
Sintering Behavior of AL2O3 Ceramics Doped with Pre-Sintered NB2O5 and LiF
Novel Alumina Compounds with Niobia, Silica and Magnesia for Ballistic Armor
Dynamic Response Behaviours of Al2O3 Ceramics with Different Grain Sizes
under SHPB Compression Loading
Measurement of High Strain Rate Indentation-Induced Deformations in
Al2O3/SiCp Composite Ceramics
Polymer 3D-Printing for Fabrication of Ceramic Parts with Complex Shape
Mechanical Properties of Hot-Pressed B4C-TiB2 Composites Synthesized from
B4C-TiO2 and B4C-TiC
Dynamic Compression Performance of Reaction Sintering SiC/B4C Composite
Preparation and Fracture Analysis of Advanced Layered Composite with
Graphene-Coated Alumina Nanofibers
Chapter 4: Polymers
Characterization and Properties of Polyurea Elastomer Used as Blast
Mitigation Agent
Ballistic Performance of Polycarbonate Plate Subjected to Truncated Cone
Projectile
Research on Mechanical Properties of PBO Microfibers Based on Molecular Scale
Dynamics
Quasi-Static and High Strain Rate Uniaxial Compressive Response of Recycled
Polycarbonate from Industrial Waste
Chapter 5: Building Materials and Structural Elements
Pilot Fracture Tests of Special Fine-Grained Composites
Literature Review of Applicable Ballistic Materials for Temporary Wooden
Building Envelopes
Durable and Highly Dissipative Fibrous Composites for Strengthening Coastal
Military Constructions
An Experimental Study on Electromagnetic Shielding Effectiveness and Impact
Resistance of UHPC for Protective Facilities
Influence of Temperature-Strain Parameters of Shelters Reinforcing Materials
on Increasing Properties in the Z-Direction
Research Regarding the Effects of 120 mm HE Mortar Bombs on Advanced
Materials
Numerical Study on the Effect of Different Steel Reinforcement Arrangement in
Reinforced Concrete Wall Subjected to Blast Load
Novel Sustainable Composites with Geopolymeric Steel Slag and Recycled from
Packing PET
The Influence of Cowper-Symonds Coefficients on the Response of Stiffened
Steel Plates Subjected to Close-In Blast Loads