Muutke küpsiste eelistusi

Computational Fluid and Solid Mechanics 2005 - Book [Kõva köide]

Edited by (Massachusetts Institute of Technology, Cambridge, USA.)
  • Formaat: Hardback, 1370 pages, kõrgus x laius: 262x192 mm, kaal: 3240 g, Illustrations
  • Ilmumisaeg: 31-Aug-2005
  • Kirjastus: Elsevier Science Ltd
  • ISBN-10: 0080444768
  • ISBN-13: 9780080444765
Teised raamatud teemal:
  • Kõva köide
  • Hind: 273,25 €*
  • * saadame teile pakkumise kasutatud raamatule, mille hind võib erineda kodulehel olevast hinnast
  • See raamat on trükist otsas, kuid me saadame teile pakkumise kasutatud raamatule.
  • Kogus:
  • Lisa ostukorvi
  • Tasuta tarne
  • Lisa soovinimekirja
Computational Fluid and Solid Mechanics 2005 - BookSuurem pilt
  • Formaat: Hardback, 1370 pages, kõrgus x laius: 262x192 mm, kaal: 3240 g, Illustrations
  • Ilmumisaeg: 31-Aug-2005
  • Kirjastus: Elsevier Science Ltd
  • ISBN-10: 0080444768
  • ISBN-13: 9780080444765
Teised raamatud teemal:
Püsilink: https://www.kriso.ee/db/9780080444765.html
Märksõnad:
The MIT Conferences in Computational Fluid and Solid Mechanics are now established as the premier meeting place for industry and academia to come together and share ideas. Distinguished and thought provoking keynote lectures, cutting edge research results, and directions for future research are presented in over 600 contributions. The CD-Rom version enables specialized searching across complete contents.

Contributing authors present results which address eight fundamental areas for research and development.







The automatic solution of mathematical models

Effective numerical schemes for fluid flows

The development of an effective mesh-free numerical solution method

The development of numerical procedures for multiphysics problems

The development of numerical procedures for multiscale problems

The modelling of uncertainties

The analysis of complete life cycles of systems

Education - teaching sound engineering and scientific judgement
Preface v
Session Organizers vii
Fellowship Awardees ix
Sponsors xi
Plenary
Open problems in elasticity
2(3)
Ball, J.M.
Fundamental and applicative challenges in the modeling and computations of shells
5(5)
Chapelle, D.
Applications of computational fluid mechanics at Sandia National Laboratories
10(3)
Domino, S.P.
Ober, C.C.
Robinson, A.C.
Bickel, T.C.
Lagrangian methods in fluids and combustion
13(5)
Ghoniem, A.F.
Computational mechanics and natural-draft cooling towers: from struggle for safety to designed lifespan
18(5)
Kraetzig, W.B.
Simulations of particle-fluid suspensions with the lattice-Boltzmann equation
23(4)
Ladd, A.J.C.
On the treatment of uncertainties in structural mechanics and analysis
27(9)
Schueller, G.I.
Solids & Structures
Constitutive modeling of anisotropy and microstructural evolution during superplastic deformation
36(4)
Abu-Farha, F.K.
Length scales evolution and localization phenomenon in sand
40(4)
Alsaleh, M.I.
Voyiadjis, G.
Alshibli, K.A.
Large-amplitude vibrations of doubly-curved shallow shells
44(4)
Amabili, M.
Tri-axial deformation characteristics of Si-based particulate assemblies: a comparative study using DEM and atomistic simulations
48(4)
Amin, M.
Antony, S.J.
Fully implicit numerical integration of a hyperelastoplastic model for sands based on critical state plasticity
52(3)
Andrade, J.E.
Borja, R.I.
Modeling of anisotropic hyperelasticity and discontinuous damage in arterial walls based on polyconvex stored energy functions
55(5)
Balzani, D.
Schroder J.
Gross, D.
Modeling active muscle behavior for emergency braking simulations
60(5)
Behr, M.
Arnoux, P.J.
Serre, T.
Kayvantash, K.
Brunet, C.
On the modeling of the Mannesmann piercing process
65(5)
Berazategui, D.A.
Cavaliere, M.A.
Montelatici, L.
Dvorkin, E.N.
Strength behaviour of aluminium bolts under static and cyclic loading
70(5)
Berger, C.
Arz, U.
Seybold, R.
Coupled Euler-Lagrange modeling of buried structure response to blast loading
75(4)
Bessette, G.C.
The displacement discontinuity method for modeling fracture in the semi-circular bending test
79(4)
Birgisson, B.
Montepara, A.
Roque, R.
Romeo, E.
Tebaldi, G.
An analytical formulation for the prediction of buckling and post-buckling of composite panels and shells
83(5)
Bisagni, C.
Medium frequency computations of structures including interface uncertainties
88(5)
Blanze, C.
Rouch, P.
Stability results for the finite element approach to the immersed boundary method
93(4)
Boffi, D.
Gastaldi, L.
Heltai, L.
Identification of stiffness reduction in beams using parameter-dependent frequency changes and neural networks
97(4)
Borowiec, A.
Ziemianski, L.
Finite-element time-domain simulations of bridge aeroelasticity: implementation and profiling
101(5)
Borri, C.
Salvatori, L.
Zahlten, W.
Transfer operator based on diffuse interpolation and energy conservation for damage materials
106(3)
Brancherie, D.
Villon, P.
Ibrahimbegovic, A.
Rassineux, A.
Breitkopf, P.
A comprehensive methodology for the modeling of diesel four-stroke engine pistons for variable engine speed conditions
109(4)
Bueno, E.M.R.
Bucalem, M.L.
Thermo-transient and thermo-mechanical finite element modeling of a diesel four-stroke engine piston for variable engine speed conditions
113(4)
Bueno, E.M.R.
Bucalem, M.L.
Zabeu, C.B.
Methods of increasing fatigue life and reducing runway deflections following an explosion beneath a cement concrete runway
117(4)
Bull, J.W.
Woodford, C.H.
A nonlinear piezoelectric 3D-beam finite element formulation
121(6)
Butz, A.
Klinkel, S.
Wagner, W.
Confronting a mathematically derived constitutive law for the myocardium with experimental data
127(4)
Caillerie, D.
Mourad, A.
Raoult, A.
Numerical analysis of a quasistatic viscoplastic contact problem with friction and damage
131(5)
Campo, M.
Fernandez, J.R.
Hoarau-Mantel, T.-V.
Computational and experimental study of active vibration control of a rectangular plate coupled to liquid
136(4)
Carra, S.
Amabili, M.
Ohayon, R.
Schotte, J.S.
Superconvergence of hp-discontinuous Galerkin methods for convection-diffusion problems
140(2)
Celiker, F.
Cockburn, B.
Locking-free hp-discontinous Galerkin methods for Timoshenko beams
142(3)
Celiker, F.
Cockburn, B.
Stolarski, H.K.
Tamma, K.K.
Computational strategy for the analysis of bolted joints taking into account variability
145(5)
Champaney, L.
Boucard, P.A.
Guinard, S.
Inclusion properties for random relations under the hypotheses of stochastic independence and non-interactivity
150(5)
Chen, S.
Tonon, F.
Transient dynamic analysis over the low- and medium-frequency ranges for engineering structures
155(3)
Chevreuil, M.
Ladeveze, P.
Some solutions to the asymptotic bending problem of non-inhibited shells
158(5)
Choi, D.
Finite element stress analysis of reinforced high-strength concrete columns in severe fires
163(6)
Chung, J.H.
Consolazio, G.R.
McVay, M.C.
Computational method for mapping continuum deformations to crystal lattices containing defects
169(5)
Chung, P.W.
Clayton, J.D.
Modelling of impact using adaptive discrete element techniques
174(5)
Cottrell, M.G.
Owen, D.R.J.
Interval finite element analysis of large structures with uncertain parameters
179(5)
De Gersem, H.
Moens, D.
Desmet, W.
Vandepitte, D.
On the forced dynamics of floating plates
184(3)
Dempsey, K.M.
Vasileva, I.V.
Softening cohesive interface analysis via boundary integral equations
187(4)
Diligenti, M.
Freddi, F.
Bounding uncertainty: computational mechanics used to analyze the structural correlates of early hominid locomotion
191(3)
Eckhardt, R.B.
Galik, K.
Kuperavage, A.J.
Anisotropic pile-up pattern at spherical indentation into a fcc single crystal -- finite element analysis versus experiment
194(4)
Eidel, B.
Gruttmann, F.
Application of joint time-frequency representation method in transient analysis of semi-infinte media
198(4)
Farahani, A.
Konagai, K.
The interval finite element method for static structural analysis
202(4)
Farkas, L.
Moens, D.
Vandepitte, D.
Effect of forming on crash performance of automotive structure - an analytical study
206(4)
Faruque, M.O.
Mallela, K.
Zeng, D.
Saha, N.
An energy-based polyhedron-to-polyhedron contact model
210(5)
Feng, Y.T.
Han, K.
Owen, D.R.J.
Damping properties of steel frame equipped with traditional and shape-memory alloy braces
215(5)
Fugazza, D.
A parametric study of bulging factors for unstiffened and stiffened cylindrical shells
220(4)
Furukawa, C.H.
Bucalem, M.L.
Chaves, C.E.
Dynamic analysis of stochastic structures using the random factor method
224(4)
Gao, W.
A posteriori error estimates for an eigenvalue problem arising from fluid-structure interaction
228(4)
Gardini, F.
Dynamic coupling between phonon and phason dynamic modes in quasiperiodic alloys
232(3)
Gei, M.
Mariano, P.M.
Global stability of empty and fluid-filled imperfect cylindrical shells
235(4)
Goncalves, P.B.
Prado, Z.J.G.N.
Silva, F.M.A.
Evolutionary shape optimization of plates with reinforcements
239(4)
Gorski, R.
Fedelinski, P.
Plasticity with nonlocal damage, with application to concrete cracking
243(4)
Grassl, P.
Jirasek, M.
Reliability evaluation of dynamic systems in time domain using nonlinear finite element method
247(3)
Haldar, A.
Huh, J.
Effects of unsteady aerodynamics on the dynamic response of mistuned bladed disks
250(6)
He, Z.
Epureanu, B.I.
Pierre, C.
Modeling response of unsaturated silty sand in three-invariant stress space
256(5)
Hoyos, L.R.
Arduino, P.
Three-layered hot-mix asphalt mixture
261(3)
Huang, B.
Li, G.
Shu, X.
A direct boundary integral method for viscoelastic-elastic composite materials
264(4)
Huang, Y.
Crouch, S.L.
Mogilevskaya, S.G.
Contact detection between axially asymmetric ellipsoids in discrete element modeling
268(3)
Johnson, S.M.
Williams, J.R.
Cook, B.K.
Generalized micro-to-macro transitions of microstructures for the first and second order continuum
271(4)
Kaczmarczyk, L.
A diversity of computer approaches in the homogenization of random composites
275(4)
Kaminski, M.
Numerical simulation on propagation of singularities through edges in thin hyperbolic shells
279(3)
Karamian-Surville, P.
An efficient numerical modelling of anisotropic structural behaviour in large strain elastoplasticity
282(5)
Karsaj, I.
Sansour, C.
Soric, J.
A three-invariant hardening cap plasticity for computational modeling of the powder compaction process
287(4)
Khoei, A.R.
Azami, A.R.
A nonlinear piezoelectric mixed solid shell finite element formulation
291(6)
Klinkel, S.
Wagner, W.
Stability and bifurcation analysis of a two-degree-of-freedom system with clearances
297(5)
Kranjcevic, N.
Slegic, M.
Vrankovic, N.
Neural prediction of response spectra from mining tremors using recurrent layered networks and Kalman filtering
302(4)
Krok, A.
Waszczyszyn, Z.
Explicit Newmark algorithm for rotational dynamics
306(4)
Krysl, P.
Reliable finite elements for the analysis of piezoelectric shells
310(4)
Lammering, R.
Yang, F.
Mesecke-Rischmann, S.
Adaptive variational multiscale methods for elliptic problems
314(4)
Larson, M.G.
Malqvist, A.
A general treatment of deformation effects in Hamiltonians for nanoscale systems
318(4)
Lassen, B.
Willatzen, M.
Melnik, R.
Finite-difference computation: a numerical tool for ultrasonic bone characterization
322(5)
Laugier, P.
Bossy, E.
Jenson, F.
Talmant, M.
Padilla, F.
Observations on non-Gaussian Karhunen-Loeve expansions
327(4)
Li, L.B.
Quek, S.T.
Phoon, K.K.
Applications of planar isotropic yield criteria to porous sheet metal under a deep drawing simulation
331(5)
Liao, K.-C.
Modal pushover analysis as a tool for evaluation and design of irregular frames
336(4)
Lignos, D.G.
Gantes, C.J.
Mode III analysis of an interface crack in a bimaterial wedge made from magneto-electro-elastic media
340(4)
Liu, T.J.-C.
Chue, C.-H.
Antiplane electro-mechanical field of a piezoelectric finite wedge under a pair of concentrated forces and free charges
344(5)
Liu, W.-J.
Chue, C.H.
Stochastic analysis of steady-state aeroelastic instabilities
349(3)
Lohr, M.
Dinkler, D.
Positional description for nonlinear 2-D static and dynamic frame analysis by FEM with Reissner Kinematics
352(5)
Maciel, D.N.
Coda, H.B.
Stochastic clustering and self-organisation of phonon and phason modes in quasicrystals
357(4)
Mariano, P.M.
Stazi, F.L.
Gioffre, M.
Augusti, G.
FEM stress recovery using Trefftz polynomials
361(4)
Mazur, J.
Kompis, V.
Novak, P.
Stochastic generalized differential quadrature formulation
365(5)
Mestrovic, M.
A wavelet-based spectral finite element for analysis of coupled wave propagation in composite beam.
370(7)
Mitra, M.
Gopalakrishnan, S.
Large strain anisotropic plasticity including effects of plastic spin
377(5)
Montans, F.J.
Bathe, K.J.
Simulation of an extensive underground structure subjected to dynamic loading using the distinct element method
382(4)
Morris, J.P.
Bonner, M.P.
`Transient thermal creep' of concrete: intrinsic behaviour or structural effect?
386(3)
Mounajed, G.
Boussa, H.
Grondin, F.
Menou, A.
A censored closure for predicting the extreme response of oscillators with non-linear damping
389(5)
Muscolino, G.
Palmeri, A.
Reduced-order modeling of MEMS
394(7)
Nayfeh, A.H.
Younis, M.I.
Abdel-Rahman, E.M.
A multiscale modeling approach to fatigue damage in discontinuous fiber polymer composites
401(5)
Nguyen, B.N.
Tucker, B.J.
Khaleel, M.A.
A formulation for evaluation of uncertain response due to multiple uncertain material properties in in-plane and plate structures
406(5)
Noh, H.C.
Non-linear numerical modeling of historical masonry on a meso-scale
411(3)
Novak, J.
Computational examination of fluid-structure interaction problems in dams
414(5)
O'Daniel, J.L.
On higher-order approximation in the MFDM method
419(4)
Orkisz, J.
Milewski, S.
Crack in a homogeneous piezoelectric material bonded to a functionally graded piezoelectric half plane
423(5)
Ou, Y.-L.
Chue, C.-H.
Multi-bodies impacting a deformable structure
428(5)
Papados, P.P.
Dynamic instability of circular cylindrical shells
433(4)
Pellicano, F.
Amabili, M.
Numerical simulation of dynamical fracture in heterogeneous materials
437(5)
Perales, F.
Monerie, Y.
Dubois, F.
Stainier, L.
Diffusion mechanism at grain boundaries in two-dimensional metals
442(3)
Poletaev, G.M.
Rakitin, R.Y.
Starostenkov, M.D.
Localization analysis for overconsolidated Kaolin clay behavior
445(4)
Prashant, A.
Penumadu, D.
Numerical Karhunen-Loeve expansion of a covariance function on a multidimensional domain via the finite elements method
449(5)
Recek, S.
Lemaire, M.
Millard, A.
A thermodynamically consistent formulation for transversely isotropic nonlinear ferroelectric hysteresis
454(5)
Romanowski, H.
Schroder, J.
Challenges in the visualization of a two-dimensional mantle dynamics simulation using one billion tracers
459(4)
Rudolph, M.L.
Gerya, T.V.
Yuen, D.A.
A new projection scheme for linear stochastic problems
463(5)
Sachdeva, S.K.
Nair, P.B.
Keane, A.J.
Numerical simulation of the creep phenomenon of steel fiber reinforced concrete
468(4)
Eldeen, S.A.S.
Taniguchi T.
An embedded cohesive crack model for fracture of quasi-brittle materials
472(4)
Sancho, J.M.
Planas, J.
Galvez, J.C.
Reyes, E.
Cendon, D.A.
A hybrid DEM model suitable for micro and nano particulate systems incorporating long-range force contributions
476(4)
Sarangi, F.
Antony, S.J.
Kuhn, M.R.
Model-adaptive structural FEM computations for fluid--structure interaction
480(5)
Scholz, D.
Duster, A.
Rank, E.
Uniaxial tensile test on an amorphous solid with embedded quasi-crystallites: a molecular dynamics study
485(3)
Shi, Y.F.
Falk, M.L.
Dynamic bending and domain wall motion in piezoelectric laminated actuators under ac electric fields
488(4)
Shindo, Y.
Narita, F.
Mikami, M.
Hayashi, K.
The local discontinuous Galerkin method and component design integration for 3D elasticity
492(3)
Siddharth, S.
Carrero, J.
Cockburn, B.
Tamma, K.K.
Kanapady, R.
Modeling of strain rate history effects in BCC metals
495(3)
Simunovic, S.
Nukala, P.V.V.K.
On meshfree computations of shells
498(4)
Skatulla, S.
Sansour, C.
Numerical simulation of soil-support interaction as basis for the day-to-day decision process in NATM tunnel excavations
502(5)
Spira, Y.
Lackner, R.
Mang, H.A.
Mechanical properties of a woven fabric
507(5)
Sun, H.
Pan, N.
Crack problems with a NGF/OQM BEM formulation for the scalar wave equation
512(3)
Telles, J.C.F.
Tudela, C.A.R.V.
Non-linear modal interactions in free-edge thin spherical shells: measurements of a 1:1:2 internal resonance
515(5)
Thomas, O.
Luminais, E.
Touze, C.
Study of interaction curves for composite laminate with cutout
520(5)
Valavala, A.
Upadhyay, C.S.
Iyengar N.G.R.
Repair of delaminated beams via piezoelectric patches
525(4)
Wang, Q.
Quek, S.T.
Dimension reduction at most probable point for higher-order reliability analysis
529(5)
Wei, D.
Rahman, S.
Smeared crack approach for asphalt concrete
534(5)
Wu, R.
Harvey, J.
A two-dimensional elastic model of pavements with thermal failure discontinuities
539(4)
Yin, H.M.
Buttlar, W.G.
Paulino. G.H.
Mechanism-based constitutive modeling of LI2 crystals
543(4)
Yuan, Y.
Parks, D.M.
A hybrid element-free Galerkin and natural element meshfree method for direct imposition of boundary conditions and faster three-dimensional computations
547(6)
Yvonnet, J.
Chinesta, F.
Periodic unit cell-based simulation of materials with random microstructure
553(4)
Zeman, J.
Time-harmonic analysis of a planar crack in an elastic half-space by BEM
557(4)
Zhang, Ch.
Mykhas'kiv, V.V.
Stankevych, V.Z.
A new arbitrary reference configuration (ARC) formulation for computational finite strain transient applications
561(5)
Zhou, X.
Tamma, K.K.
Sha, D.
Fluids
Nonsimilar solution of an unsteady mixed convection flow on a moving slender cylinder
566(6)
Anilkumar, D.
Roy, S.
Study of unsteady flow past a circular cylinder using a new computational approach at the outflow boundary
572(6)
Anwer, S.F.
Hasan, N.
Sanghi, S.
Estimation of hemolysis in centrifugal blood pumps using morphology tensor approach
578(5)
Arora, D.
Behr, M.
Coronado-Matutti, O.
Pasquali, M.
Monte-Carlo simulations of baroclinic vortices
583(3)
Assad, S.M.
Lim, C.C.
GLS-type finite element methods for viscoelastic fluid flow simulation
586(4)
Behr, M.
Arora, D.
Coronado-Matutti, O.M.
Pasquali, M.
T-RANS based analysis of turbulent swirling flows
590(4)
Benim, A.C.
Nahavandi, A.
Syed, K.J.
Perturbed three-point vortex problems
594(4)
Blackmore, D.
Knio, O.
Ting, L.
Matching pursuit with POD modes dictionaries in the analysis of 2D turbulence signals and images
598(4)
Bruneau, Ch.H.
Fischer, P.
Peter, Z.
Yger, A.
Application of vascular CFD for clinical evaluation of cerebral aneurysms
602(5)
Castro, M.A.
Putman, C.M.
Cebral, J.R.
Numerical simulation of flow alterations after carotid artery stenting from multi-modality image data
607(5)
Cebral, J.R.
Castro, M.A.
Putman, C.M.
On the application of asymptotic reduction methods of slender structures to fluid-structure interaction problems
612(5)
Cesnik, C.E.S.
Palacios, R.
A finite element projection method for low-Mach number reacting flows
617(6)
Christon, M.A.
Patil, R.S.
The local variational multiscale method
623(5)
Collis, S.S.
Ramakrishnan, S.
Modelling of coupled conduction and convection under dehumidifying conditions
628(4)
Comini, G.
Nonino, C.
Savino, S.
Lattice and discrete Boltzmann equations for fully compressible flow
632(4)
Dellar, P.J.
A new computational paradigm for the statistics of extreme events in nonlinear random seas
636(4)
Fedele, F.
Transport, growth and stability of disturbances in weakly rarefied channel flows
640(6)
Fedele, F.
Hitt, D.L.
Jet simulation in a diesel engine
646(4)
Glimm, J.
Kim, M.N.
Li, X.-L.
Samulyak, R.
Xu, Z.-L.
Nitrogen chemistry controlling steps in methane-air premixed flames
650(4)
Goussis, D.A.
Skevis, G.
A two-grid finite volume method for variational multiscale large eddy simulation of turbulent flows
654(4)
Gravemeier, V.
On the application of symmetry methods for turbulence modelling
658(4)
Guenther, S.
Oberlack, M.
Toward a definition of LES
662(3)
Guermond, J.-L.
Prudhomme, S.
A brief review on mathematical models for electrospinning
665(3)
He, J.-H.
Simulating dendritic growth with convection
668(4)
Heinrich, J.C.
Poirier, D.R.
Zhao, P.
Image-based computational hemodynamics with the Lattice Boltzmann method
672(4)
Hoekstra, A.G.
Numerical analysis of 3-D lid-driven cavity flows with different spanwise aspect ratios
676(3)
Ishii, K.
Nihei, T.
Adachi, S.
Numerical reconstruction of the initial temperature of diapiric structures in the Earth: effect of the heat diffusion
679(4)
Ismail-Zadeh, A.
Korotkii, A.
Schubert, G.
Tsepelev, I.
Nonequilibrium relaxation in high-temperature gas flows
683(5)
Josyula, E.
Xu, K.
Yin-Yang grid and geodynamo simulation
688(5)
Kageyama, A.
Numerical studies of laser-induced energy deposition for supersonic flow control
693(5)
Kandala, R.
Candler, G.V.
Topology change of vortices using stochastic differential equations
698(3)
Kevlahan, N.K.-R.
On the flow-condition-based interpolation approach for incompressible fluids
701(5)
Kohno, H.
Bathe, K.J.
Breakdown revisited
706(4)
Krause, E.
An immersed interface method for the incompressible Navier-Stokes equations in irregular domains
710(7)
Le, D.V.
Khoo, B.C.
Peraire, J.
On chain branching and its role in homogeneous ignition and premixed flame propagation
717(4)
Lee, J.C.
Najm, H.N.
Lefantzi, S.
Ray, J.
Frenklach, M.
Valorani, M.
Goussis, D.A.
Large eddy simulation in support of RANS modelling
721(5)
Leschziner, M.A.
Three-dimensional numerical modelling of curved open channel using nonhydrostatic turbulent finite element solver for free-surface flows
726(8)
Leupi, C.
Miglio, E.
Altinakar, M.S.
A NET grid computing system applied to Lattice-Boltzmann
734(4)
Lin, X.
Williams, J.R.
Numerical analysis of two distinct types of vortex dislocation in wake-type flows with different spanwise nonuniformities
738(4)
Ling, G.C.
Niu, J.Y.
Solenoidal invariance of the dynamics for stability calculations
742(5)
Lopez, J.I.H.
Meneghini, J.R.
Aranha, J.A.P.
Saltara, F.
Compressible effects on ice particle growth in turbulent jets
747(4)
Maglaras, E.
Garnier, F.
A FEM Navier-Stokes solver coupled to a front-tracking algorithm for two-phase flows
751(4)
Manservisi, S.
Aulisa E.
Marra, V.
Scardovelli, R.
Discontinuous Galerkin spectral element simulation of a type of wave propagation with large source terms
755(6)
Mao, S.
Luongo, C.A.
Kopriva, D.A.
RANS computations of artery flows
761(5)
Medic, G.
On the influence of diabatic effects on the motion of 3D-mesoscale vortices within a baroclinic shear flow
766(3)
Mikusky, E.
Owinoh, A.Z.
Klein, R.
Approximate projection methods and time integration stability
769(3)
Moen, C.D.
Domino, S.P.
Wagner, G.J.
Non-Newtonian effects in simple models of mantle convection
772(3)
Muhlhaus, H.-B.
Davies, M.
Gross, L.
Moresi, L.
O(2) symmetry constrained mode interactions in 2D cylinder wake flow
775(4)
Mureithi, N.W.
Three-dimensional numerical simulations of thermo-chemical multiphase convection in the Earth's mantle
779(4)
Nakagawa, T.
Tackley, P.J.
Mixing in a convecting viscous fluid: applications to the Earth's mantle
783(4)
Naliboff, J.B.
Kellogg, L.H.
Rigorous error control in reacting flow simulations using reduced chemistry models
787(5)
Oluwole, O.
Green, W.H.
Numerical approximation of the spectra of Poiseuille flow of two Phan-Thien Tanner liquids
792(5)
Palmer, A.S.
Phillips, T.N.
Inviscid and viscous CFD modeling of plume dynamics in laser ablation
797(5)
Pathak, K.A.
Povitsky, A.
Compound wall treatment for RANS computation of complex turbulent flows
802(5)
Popovac, M.
Hanjalic, K.
Improvement of fiber twisting and crimping in the melt-blowing process
807(3)
Qu, Y.-H.
He, J.H.
Ke, Q.-F.
Consistent hybrid LES-FDF simulation of turbulent reactive flows
810(5)
Raman, V.
Pitsch, H.
Simulation of polymer flow in a rotating die-slot
815(4)
Rawal, A.
Davies, P.J.
Three fast computational approximation methods in hypersonic aerothermodynamics
819(5)
Riabov, V.V.
A modified conservation law approach to improved finite element incompressible Navier-Stokes algorithms
824(4)
Sahu, S.
Baker, A.J.
Computational stability study of 3D flow in a differentially heated 8:1:1 cavity
828(4)
Salinger, A.G.
Influence of the vortical wake behind wind turbines using a coupled Navier-Stokes/vortex-panel methodology
832(5)
Schmitz, S.
Chattot, J.-J.
Incompressible velocity approximations for incompressible fluid flow using DG methods
837(3)
Schotzau, D.
Investigation of nozzle stability for the first ovalization mode by numerical solution of the fluid-structure interaction problem
840(5)
Schwane, R.
Xia, Y.
High-resolution computational modelling of multi-material flows
845(5)
Shapiro, E.
Drikakis, D.
Wake mode development for flow past low aspect ratio cylinders
850(4)
Sheard, G.J.
Thompson, M.C.
Hourigan, K.
Receptivity of a low Reynolds number Bickley jet to harmonic vortical excitation
854(4)
Sircar, S.K.
Sengupta, T.K.
Fully developed two-phase liquid-liquid flow in a finned duct
858(4)
Son, E.E.
Tarasova, E.N.
Zubkov, P.T.
Modeling resin infusion of composite sandwich structures by the VARTM process
862(5)
Song, X.
Loos, A.C.
Grimsley, B.W.
Cano, R.J.
A quasi-one-dimensional unsteady laminar flame formulation with independent strain rate and curvature
867(5)
Speth, R.L.
Marzouk, Y.M.
Ghoniem, A.F.
Assessment of simulation techniques for rotor loads prediction
872(4)
Steijl, R.
Barakos, G.
Badcock, K.
A hybrid Galerkin atmospheric model
876(5)
Thomas, S.J.
St-Cyr, A.
Nair, R.D.
A lattice Boltzmann study on trade-off between mixing and flow efficiency for electroosmotic flow in heterogeneous microchannels with nonuniform surface potentials
881(6)
Tian, F.
Kwok, D.Y.
FEM simulation of unsteady viscous incompressible fluids flows
887(5)
Tralli, A.
Gaudenzi, P.
Numerical investigation of flow instability in rotating cavities
892(3)
Tuliszka-Sznitko, E.
Serre, E.
Bontoux, P.
Extension of the LBM to 3D fully unstructured grids
895(5)
Ubertini, S.
Rossi, N.
Bella, G.
Succi, S.
Chemical kinetics mechanism simplification via CSP
900(5)
Valorani, M.
Creta, F.
Goussis, D.A.
Najm, H.N.
Lee, J.C.
Modeling of three-dimensional bubbly flows with a mass-conserving level-set method
905(5)
Van der Pijl, S.P.
Segal, A.
Vuik, C.
A Laplacian-based grid manipulator for ALE calculations in screw compressors
910(4)
Vande Voorde, J.
Vierendeels, J.
Dick, E.
Scaling laws for the high-pressure inductively coupled plasma torch under thermochemical non-equilibrium
914(4)
Vanden-Abeele, D.
Degrez, G.
Explicit feedback control for a thermal convection loop
918(5)
Vazquez, R.
Krstic, M.
An implicit high order cell-centered finite volume scheme for the solution of three-dimensional Navier-Stokes equations on unstructured grids
923(5)
Vigneron, D.
Vaassen, J.-M.
Essers, J.-A.
Large-eddy simulation of turbulent gas-particle flows in the duct induced by the wall injection
928(4)
Volkov, K.N.
Benchmark experimental data for radiative heat transfer prediction
932(4)
Vujicic, M.R.
Lavery, N.P.
Brown, S.G.R.
An overview of vortex shedding and acoustic resonance in tube arrays
936(4)
Weaver, D.S.
Large-eddy simulations of fluid--structure interaction problems
940(5)
Yang, J.
Preidikman, S.
Balaras, E.
Efficient modeling of dispersive wave propagation in unbounded domains
945(5)
Zahid, M.A.
Guddati, M.N.
Tracked flame simulation for a type la supernova
950(4)
Zhang, Y.
Glimm, J.
Dutta, S.
Multi-scale modeling of liquid transport in fibrous materials
954(6)
Zhong, W.
Pan, N.
Lukas, D.
Multiphysics
An efficient algorithm for the detection of neighbouring particles: prediction of the behaviour of a bubbling fluidised bed
960(4)
Chiesa, M.
Melheim, J.A.
Simulations of alternative phases of space-filling graphene crystals under mechanical loads
964(5)
Chung, P.W.
Numerical discretization of a fully quantum drift-diffusion model
969(3)
Degond, P.
Gallego, S.
Mehats, F.
Simulation of closed-loop flow in a ventricular assist device coupled with a circulatory system model
972(3)
Doyle, M.G.
Tavoularis, S.
Bourgault, Y.
Efficient quantum-mechanical model based on drift-diffusion approach for simulations of modern nanoscale devices
975(4)
Fedoseyev, A.
Przekwas, A.
Turowski, M.
Wartak, M.S.
Stress concentration near the corner point of a magnetoactive 2D compound wedge
979(5)
Hasanyan, D.
Librescu, L.
Qin, Z.
Young, R.D.
Numerical simulation of human voice production using aeroelastic model of self-oscillations of the vocal folds and finite element model of the vocal tract
984(5)
Horacek, J.
Sidlof, P.
Svec, J.G.
Griffond-Boitier, F.
Finite element modeling of a two-fluid RF plasma discharge
989(4)
Kumar, H.
Roy, S.
Dynamically distributed and p-adaptive finite element simulation of soil-structure interaction based on multi-agent systems
993(5)
Meissner, U.F.
Mueller, M.
Ruben, J.
Implicit, approximately-factored, upwind scheme for glow discharge modeling
998(3)
Poggie, J.
A numerical model of the resistance heating system for material tests on a Gleeble simulator
1001(3)
Solek, K.
Mitura, Z.
Kuziak, R.
The hypersonic quasineutral gas discharge plasma in a magnetic field
1004(2)
Surzhikov, S.T.
Shang, J.S.
Multi-physics simulation of sand-erosion phenomena on turbine blade
1006(3)
Suzuki, M.
Toda, K.
Yamamoto, M.
Sensitivity analysis of 3D MRI-based models with fluid-structure interactions for human atherosclerotic coronary and carotid plaques
1009(5)
Tang, D.
Yang, C.
Zheng, J.
Woodard, P.K.
Sicard, G.A.
Saffitz, J.E.
Yuan, C.
Twenty years of FSI experiments in Dundee
1014(4)
Tijsseling, A.S.
Vardy, A.E.
A tightly coupled particle-fluid model for DNA-laden flows in complex microscale geometries
1018(5)
Trebotich, D.
Miller, G.H.
Colella, P.
Graves, D.T.
Martin, D.F.
Schwartz, P.O.
A non-isothermal, transient model of a non-catalytic reaction in a packed bed with a multi-component high-temperature gas mixture
1023(3)
Valipour, M.S.
Saboohi, Y.
Experimental and computational thermomechanical study of a shape-memory alloy micro-actuator: aspects of antagonist-type behavior
1026(5)
Velazquez, R.
Hafez, M.
Szewczyk, J.
Pissaloux, E.
Modelling of quantum well semiconductor lasers based on Green's functions
1031(4)
Wartak, M.S.
Weetman, P.
Applications of the mean-field lattice Boltzmann method for solid-fluid interfaces to study interfacial phenomena
1035(5)
Zhang, J.
Kwok, D.Y.
Algorithms
Superconvergence of the local discontinuous Galerkin method applied to diffusion problems
1040(4)
Adjerid, S.
Issaev, D.
On direct time integration in large deformation dynamic analysis
1044(4)
Baig, M.M.I.
Bathe, K.J.
Comparison of numerical schemes for the bidomain model
1048(4)
Bourgault, Y.
Ethier, M.
Discontinuous Galerkin approximation of eigenvalue problems
1052(3)
Buffa, A.
Perugia, I.
High-accuracy numerical methods for incompletely parabolic problems in fluid dynamics I: formulation
1055(3)
Cecchi, M.M.
Pirozzi, M.A.
A two-dimensional floating random-walk algorithm for the solution of the nonlinear Poisson-Boltzmann equation: application to the modeling of plasma sheaths
1058(4)
Chatterjee, K.
Poggie, J.
Developments in extended differential quadrature-based discrete element analysis methods and time integration schemes
1062(7)
Chen, C.N.
High-order RKDG methods for computational electromagnetics
1069(3)
Chen, M.-H.
Cockburn, B.
Reitich, F.
The heterogeneous multiscale method based on the discontinous Galerkin and the finite volume methods for hyperbolic problems
1072(4)
Chen, S.
Weinan, E.
Shu, C.-W.
A return mapping algorithm for isotropic and anisotropic large deformations
1076(6)
Cheng, Z.
Jeremic, B.
Meshless domain decomposition schemes for nonlinear elliptic PDEs
1082(5)
Chinchapatnam, P.P.
Djidjeli, K.
Nair, P.B.
Superconvergence of linear functionals by discontinuous Galerkin approximations
1087(3)
Cockburn, B.
Ichikawa, D.
In-time implicit-explicit algorithm for nonlinear finite element analysis
1090(5)
Sosa, J.L.C.
De Souza Neto, E.
Owen, D.R.J.
A new stable discontinuous Galerkin approximation for non-linear conservation laws on adaptively refined grids
1095(5)
Dedner, A.
Makridakis, C.
Ohlberger, M.
The Fourier boundary element method and its singularities
1100(5)
Duddeck, F.
Operator-splitting methods for transport equations with nonlinear reactions
1105(4)
Ewing, R.E.
Geiser, J.
Liu, J.
Application of fast multipole methods to the analysis of MEMS
1109(3)
Frangi, A.
Di Gioia, A.
Novati, G.
An algorithm for distributed immersed boundary computations
1112(3)
Givelberg, E.
Normalized implicit preconditioned methods based on normalized finite element approximate factorization procedures
1115(5)
Gravvanis, G.A.
Giannoutakis, K.M.
Parallel normalized implicit preconditioned conjugate gradient methods for solving biharmonic equations on symmetric multiprocessor systems
1120(6)
Gravvanis, G.A.
Giannoutakis, K.M.
Developments of multi-level boundary element methods for steady heat diffusion problems
1126(7)
Grigoriev, M.M.
Dargush, G.F.
Intelligent finite element method
1133(4)
Javadi, A.A.
Tan, T.P.
Elkassas, A.S.I.
Real-time prediction of ship motion using artificial neural networks
1137(4)
Khan, A.A.
Bil, C.
Marion, K.E.
An accelerated boundary element method using fast Fourier transform on multipoles
1141(5)
Lim, K.-M.
Ong, E.-T.
Lee, H.-P.
Towards one billion particle systems
1146(4)
Munjiza, A.
Rougier, E.
John, N.W.M.
Virtual experimentation in the service of theoretical and experimental science
1150(6)
Munjiza, A.
Rougier, E.
John, N.W.M.
Mach-uniformity through the coupled pressure- and temperature-correction algorithm
1156(5)
Nerinckx, K.
Vierendeels, J.
Dick, E.
Size functions and mesh generation for high-quality adaptive remeshing
1161(5)
Persson, P.-O.
Sliding mode control for civil structures based on complex Fourier coefficients of the earthquake
1166(5)
Pnevmatikos, N.G.
Gantes, C.J.
A coupled EFGM-BEM approach for dynamic analyses of a halfspace including nonlinear effects
1171(4)
Quan, J.
Von Estorff, O.
Performance of ILUT preconditioners in modeling bioheat and mass transfer in skin thermal injury
1175(4)
Shen, W.
Zhang, J.
Yang, F.
Improving productivity for parallel finite element codes through software engineering
1179(3)
Shires, D.R.
Henz, B.J.
Error-estimation and adaptivity using operator-customized finite-element wavelets
1182(5)
Sudarshan, R.
Amaratunga, K.
Gratsch, T.
Experimental/theoretical correlation study of nonlinear aeroelasticity for a wing-store model with freeplay
1187(4)
Tang, D.
Attar, P.J.
Dowell, E.H.
The space-time upwind cell-vertex scheme for conservation laws: a Riemann solver-free approach
1191(7)
Tu, S.
Aliabadi, S.
Optimization & Design
An influence of the material discontinuity on the die forging process-numerical simulation
1198(4)
Adamus, J.
Lacki, P.
Bounds on structural system reliability in the presence of interval variables
1202(3)
Adduri, P.R.
Penmetsa, R.C.
Grandhi, R.V.
Thermal optimisation of the squeeze-forming process using genetic algorithms
1205(4)
Ahmad, R.
Gethin, D.T.
Lewis, R.W.
Ransing, R.S.
Postek, E.W.
Cavitator design for a supercavitating torpedo using evidence theory for reliability estimation
1209(4)
Alyanak, E.
Grandhi, R.V.
Bae, H.-R.
Towards lifetime optimization of hanger connection plates for steel arch bridges
1213(5)
Baitsch, M.
Hartmann, D.
Thermal fluid--structure interaction on re-entry vehicle TPS
1218(5)
Borreca, S.
Tumino, G.
Gaudenzi, P.
Coupled evolutionary algorithm and artificial neural network in defects identification
1223(4)
Burczynski, T.
Skrobol, A.
Comparative studies of two POD methods for airfoil design optimization
1227(4)
Cai, X.
Ladeinde, F.
Filtering and regularization techniques in shape optimization with CAD-free parametrization
1231(5)
Daoud, F.
Camprubi, N.
Bletzinger, K.-U.
A probabilistic approach to improve the static performance of a composite wing
1236(4)
D'Ippolito, R.
Donders, S.
Tzannetakis, N.
Van de Peer, J.
Van der Auweraer, H.
Evaluation of optimization algorithms for crash and NVH problems
1240(4)
Duddeck, F.
Volz, K.
An abstract interface for surrogate optimization in the PLATON framework
1244(6)
Fahimuddin, A.K.M.
Krosche, M.
Matthies, H.G.
Augmented genetic algorithm with neural network and implementation to airfoil design
1250(4)
Hacioglu, A.
Design optimization of an engine air intake
1254(5)
Hoyle, N.
Bressloff, N.W.
Keane, A.J.
Towards automated optimization
1259(5)
Junghanns, A.
Petzoldt, D.
Dageforde, J.
Meyer, M.
Quadrilateral mesh adaptation by area functional
1264(3)
Khattri, S.K.
Application of Markov chain Monte Carlo method for structural reliability
1267(4)
Kolanek, K.
A nonlinear stability analysis of the support structure of a particle detetector
1271(4)
Mladenov, D.
Genetic algorithm transformations for non-orthogonal models
1275(4)
Obiala, R.
Seed, G.M.
Topping, B.H.V.
Ivanyi, P.
Clark, D.E.R.
Modeling the overhead power line post spring-damper using ADINA
1279(5)
Peabody, A.B.
McClure, G.
Real-time reduced basis techniques in arterial bypass geometries
1284(4)
Rozza, G.
A modular approach for simulation-based optimization of technical systems
1288(4)
Schneider, P.
Schneider, A.
Schwarz, P.
Active control and drag optimization for flow past a cylinder at high Reynolds number using genetic algorithms
1292(5)
Talla, S.B.
Deb, K.
Sengupta, T.K.
Condor, a parallel, direct, constrained optimizer for high-computing-load, black-box objective functions
1297(5)
Vanden Berghen, F.
The Ornicopter: a single rotor helicopter without reaction torque - a short overview
1302(4)
Van Holten, Th.
Heiligers, M.M.
Cost-benefit analysis of conventional and seismic isolated R/C buildings
1306(4)
Vassilas, E.C.
Koumousis, V.K.
Multi-objective shape optimization of the human carotid artery
1310(5)
Vijaya Bhaskar, K.
Bressloff, N.W.
Nair, P.B.
Crash optimization of car bodies in the concept stage of vehicle development
1315(5)
Volz, K.
Duddeck, F.
Mass minimization of vehicle structure subject to varying crashworthiness constraints: a prediction correction approach
1320(4)
Wauquieza, Ch.
Kayvantash, K.
Masfrandb, S.
Bekkoura, T.
Arnaudeau, F.
Design for reliability of stochastic dynamic systems by algebraically derived reduced order models
1324(5)
Weickum, G.
Allen, M.
Maute, K.
Author Index 1329(5)
Keyword Index 1334