Damage and Failure of Interfaces [Kõva köide]

Preface; Fracture mechanics of interfaces; Numerical simulation
methodologies for dynamic crack propagation in homogeneous and nonhomogeneous
materials;
Dynamic properties of interfaces; Stress singularity near a crack tip
terminating at a nonideal interface; Stress fields at interface-comers and
cracks for non-linear deformations; Stress singularities at the tip of
interfaces in polycrystals; Stress singularities in a bimaterial joint under
axisymmetric deformation; Free edge effects at interfaces in selectively
reinforced structures; Time dependent boundary element analysis of singular
stresses at the interface comer of viscoelastic adhesive layer; The analogy
between interface crack problems and punch problems; Influence of micro-voids
on toughness of interfaces; Some aspects of stability and bifurcation with
moving discontinuities; Modelling transverse matrix cracking in laminated
fibre-reinforced composite structures; Rate-dependent interface models for
the analysis of delamination in polymer-matrix composites; Delamination
cracking between plies of different orientation angles in composite
laminates; On the identification of an interface damage model for the
prediction of delamination initiation and growth; Examples of delamination
predictions by a damage computational approach; Interface degradation in
ceramics under cyclic loading; Reduction of stiffness characteristics of
balanced laminates with intralaminar cracks; Deformation and failure of
heat-sealed area in laminated plastic film used for liquid 187
package bags; Delamination buckling and growth at global buckling; A
non-osmotic blister growth model in coating systems; Crack and debonding at
an end of the simple support type constraint for thin plate 211
bending problem; Modelling of temperature dependent failure process in fibre
reinforced titanium alloy; Intergranular fracture at low temperatures at poly
crystalline materials; On some thermoelastic problems of interfacial cracks
and rigid inclusions in laminates; Non-linear analysis of carbon-carbon
composite nozzle with interface; Prediction of damage and failure in thermal
barrier coatings; Multiple fiber breaks in a fiber composite with a creeping
matrix; Fracture and interface properties of a composite with long aligned
fibers; Stress analysis in a three phase material with fibre, coating and
matrix; Finite element modelling of damage development during longitudinal
tensile loading 281
of coated fibre composites; Dynamic stresses in elastic and elastic-plastic
solids with cracks; Two optical techniques applied to the investigation of
intersonic interface fracture; Rayleigh pulse interaction with partially
contacting dissimilar interfaces; Reflection and refraction of plane stress
waves at dissipative interfaces; Flexural vibrations of sandwich beams with
deteriorating interfaces; Impact response of a composite plate with a
delamination; Impact damage and post impact residual strength of pultruded
composite beams; Damage behaviors in CFRP laminates due to repeated impacts
of low energy; Critical impact energy density for welding aluminium plate
onto surface of different metal by gas-gun method; Damage assessment of
two-layer targets under nominal ordnance impact; Analysis of singularities
and interfacial crack propagation in micromechanical tests; Characterization
of damage and failure during the pull-out of a reinforcement bar by acoustic
emission and numerical simulation; Stable crack growth and damage tolerance
evaluation of Ti-24A1-1 INb matrix composite unidirectionally reinforced with
SiC fibers; Identification of interfacial parameters with analytical and
numerical models from Pull-out tests on a micro-composite; Interlaminar
fracture analysis of GFRP influenced by fibre surface treatment; Trapping
mechanism of interface crack at concrete / engineered cementitious composite
bimaterial interface; Interface roughness and sliding in ceramic matrix
composites; On the role of the steel-concrete interface in dowel action: Some
experimental and numerical results; Microstructural analysis of cancellous
bone using interface elements; The bone-prosthesis interface: An overview and
preliminary tests; A mechanical constitutive model for rock and concrete
joints under cyclic loading; Modelling of the influence of interfaces on the
fracture pattern during sequential mining; Modelization of the damage and
failure of a finger joint; An acoustic emission study on tensile behavior of
welded steel joints; Local crack-tip strain behavior during fatigue crack
initiation under mixed mode loading; List of participants: Author index

H.P. Rossmanith