Muutke küpsiste eelistusi

Emerging Focus on Advanced Materials [Pehme köide]

Edited by , Edited by
  • Formaat: Paperback / softback, 1700 pages, kõrgus x laius x paksus: 240x170x85 mm, kaal: 3200 g, Illustrations, unspecified, Contains 2 paperbacks
  • Sari: Advanced Materials Research
  • Ilmumisaeg: 15-Sep-2011
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 3037852046
  • ISBN-13: 9783037852040
Teised raamatud teemal:
Emerging Focus on Advanced MaterialsSuurem pilt
  • Formaat: Paperback / softback, 1700 pages, kõrgus x laius x paksus: 240x170x85 mm, kaal: 3200 g, Illustrations, unspecified, Contains 2 paperbacks
  • Sari: Advanced Materials Research
  • Ilmumisaeg: 15-Sep-2011
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 3037852046
  • ISBN-13: 9783037852040
Teised raamatud teemal:
Püsilink: https://www.kriso.ee/db/9783037852040.html
This special collection of papers covers fields including: Biomaterials and Tissues, Energy-Harvesting Materials and Energy-Transfer Materials, Optical and Electronic Materials, Superconductive and Magnetic Materials, Structural Materials, Polymer Materials, Composite Materials, Constructional Materials, Nanomaterials, Environmental and Green Materials. These selected articles focus on the latest developments in advanced materials. The proceedings will provide materials scientists and engineers with a comprehensive overview of the preparation, characterization, performance and application of materials.
Preface v
Committees vi
Part 1
Chapter 1 Biomaterials and Tissues
Grafting Biomimetic Phospholipid Zwitterionic Brushes onto Polycarbonateurethane for Improving Hemocompatibility
3(4)
H.Y. Zhao
Y.K. Feng
D.Z. Yang
J.T. Guo
Q.L. Chen
J.S. Liu
Dynamic Cell Patterning Technology Based on Photocleavable Molecules
7(4)
J. Nakanishi
Conductometric Study of the Effect of Citric Acid on Phase Evolution of Calcium Phosphate in Solutions
11(5)
C.F. Li
X.L. Ge
J.H. Bai
G.C. Li
SiO2 Beads with Quantum Dots: Synthesis and Bioapplication
16(4)
P. Yang
N. Murase
A.Y. Zhang
Y.Q. Cao
Y.N. Zhu
R.X. Shi
Measurement of Glucose Concentration in Cancer Cell by Catalyzed-Enzyme Reaction
20(5)
F.Q. Xia
W.R. Jin
Preparation and the Blood Compatibility of Titanium Oxide Nanorod Arrays
25(6)
P. Luo
Z.Y. Huang
D.H. Chen
Advances in Biosensor Application for Environmental Monitoring
31(6)
Z.X. Yao
Y.F. Zhang
D.W. Fan
X.D. Xin
J. Zhao
G.D. Chen
B. Du
Q. Wei
Preparation of PVA/PEG Phase Change Composite Nanofibers by Electrospinning
37(4)
D.H. Sun
T.Y. Xu
Y.J. Liu
M. Zhang
Study on Preparation and Sensitive Properties of Polyethylene Glycol (PEG) / Polyvinyl Alcohol (PVA) Thermo-Sensitive Hydrogel
41(5)
M. Zhang
T.Y. Xu
Y. Cui
D.H. Sun
The Magnetism of DNA Molecular Materials
46(4)
Y.J. Wang
J. Cheng
X.F. Yue
D.S. Liu
Thermal and Thermo-Oxidative Degradations of Deproteinized Natural Rubber and Natural Rubber
50(8)
C.Z. He
Z. Peng
J.P. Zhong
S.Q. Liao
X.D. She
Y.Y. Luo
H.S. Tan
Fabrication of Shortened Electrospun Fibers with Concentrated Polymer Brush Toward Biomaterial Applications
58(5)
C.F. Huang
C. Yoshikawa
K. Zhang
S. Hattori
T. Honda
E. Zawadzak
H. Kobayashi
Biomimetic Synthesis of Fluorapatite Coating
63(9)
H.Y. Wang
K.N. Sun
T. Shan
X.Q. Yang
Y. Zhao
Y.J. Liang
Reinforcement of Hydroxyapatite with Multi-Walled Carbon Nanotubes
72(4)
Z.H. Lu
K.N. Sun
D.M. Zhao
Shape-Memory NiTi Foam Synthesized by CIP and Sintering with NaCl Space-Holders
76(6)
H.W. Hou
W.T. Wei
Z.X. Chen
Synthesis of Chemical Responsive Chitosan-Grafted-Polyaniline Bio-Composite
82(5)
S.K. Shukla
A. Tiwari
Study on the Microbial Hydrolysis of Maize Straw and the Water Reducing Properties of the Hydrolysate
87(8)
Y.X. Wang
G.X. Zhang
X.Y. Song
N.X. Sun
Y.M. Li
H.Z. Wang
Chapter 2 Energy Harvesting Materials and Energy-Transfer Materials
Isothermal Oxidation Behavior of the AISI430 Stainless Steel at High Temperature in Static Air
95(5)
B. Sun
S.R. Wang
Y.J. Wang
Y.Z. Pan
Rheological Behavior of Semisolid Al-6.5wt%Si Alloy at Transient State
100(4)
H.C. Luo
W. Wang
E.S. Xu
L.P. Ju
Rheological Behavior of Semisolid Al-6.5wt%Si Alloy under Cyclic Shear Deformation
104(4)
H.C. Luo
J.M. Yang
L.Y. Sun
L.P. Ju
Self-Assembly Proton Exchange Membranes for Direct Methanol Fuel Cell with Size-Controlled Au Nanoparticles
108(4)
A.P. Jin
Z.H. Wan
K.C. Lei
Preparation and Photovoltaic Properties of Flexible Dye-Sensitized Solar Cells
112(4)
Y. Zeng
L.J. Zhao
Y. Zhen
F.X. Shi
Y. Tong
Texture and Ductility of Ni3Al Foils
116(4)
M. Demura
Y. Xu
T. Hirano
Research on Optimization Design of Shearer Sliding Shoes by Plasma Cladding Cr28MnV
120(5)
J.L. Liu
G.F. Wu
H.T. Liu
Fabrication of Anti-Reflective Coatings on Solar Collector Tubes
125(5)
Y.C. Niu
G.W. Huang
Y. Chen
W.W. Dou
D.M. Sun
J. Li
Catalytic Properties of Ni3Al Foils for Hydrogen Production
130(4)
T. Hirano
Y. Xu
M. Demura
Facile Preparation of NiO/Ni Nanocomposite and its Electrochemical Capacitive Behaviors
134(5)
W.D. Yin
G.L. Li
X.M. Liu
Characterization of AB5-Type Metal Hydride Modified by Electroless Plating Nickel in Forming Process
139(4)
W.T. Wu
J.S. Do
Combustion Characteristics of Biomass and its Cellulose
143(4)
C.C. Zhang
H.J. Lu
Z.W. He
The Synthesis of New Rhodanine Ramification and Application in Determine Trace Bismuth
147(4)
F.W. Wan
M. Zhang
S.W. Wang
J.H. Yu
Optimization for the Formation of Metal Hydride Electrode Used in Ni/MH Batteries
151(4)
J.S. Do
R.L. Tsai
Preparation and Electrochemical Properties of Pt/Mesoporous-C for Oxygen Reduction Reaction: Effect of Carbonation Temperature
155(4)
C.Y. Hsieh
Y.S. Huang
J.S. Do
Growth and Photovoltaic Performance of Single-Crystal TiO2 Nanorod Array Directly on Transparent Conducting Substrates
159(8)
X.Q. Gu
Y.L. Zhao
Y.H. Qiang
Chapter 3 Optical and Electronic Materials
Synchrotron Radiation X-Ray Absorption and Optical Studies of Cubic SiC Films Grown on Si by Chemical Vapor Deposition
167(4)
Y.L. Tu
Y.H. Huang
L.M. Kong
K.Y. Lee
L.Y. Jang
C.C. Tin
C.W. Liu
Z.C. Feng
Luminescence in Rare Earth Activated AIPO4 Phosphor
171(5)
K.N. Shinde
S.J. Dhoble
Synthesis and Photoluminescence of Cr-Doped Rod-Like ZnO Particles by Hydrothermal Method
176(4)
L.M. Hang
Z.Y. Zhang
J.F. Yan
Silicon Microfabrication Processes Including Anodic Bonding of Extremely Thin (60 μm Thick) Silicon on Glass
180(5)
T. Nara
K. Oku
H. Fukai
H. Hatagouchi
Y. Nishioka
Characteristics of Gamma-Ray Irradiated Pentacene Organic Thin Film Field Effect Transistors
185(8)
H. Yano
L. Cai
T. Hirao
Z.F. Duan
Y. Takayanagi
H. Ohuchi
H. Ueki
T. Ohshima
Y. Nishioka
Fabrication of Condenser Microphones on Silicon on Insulator Wafer
193(8)
S. Hishinuma
N. Kimori
Y. Kumai
K. Oku
T. Takahashi
D. Irokawa
E. Sugizaki
N. Watanabe
T. Ikehara
R. Maeda
Y. Nishioka
Influence of the Quality of AIN Buffer Layer on the Quality of GaN Epitaxial Layer on Silicon Substrate
201(5)
K. Zhang
T.P. Lu
S.T. Li
Two Novel Tetrahedrally Silicon-Based Benzimidazole Derivatives: Potentials as Blue Emitters for OLEDs
206(5)
Q.Y. Ma
R.F. Guan
G.Z. Li
Study on Hydrothermal Synthesis of LaPO4: Eu3+ Materials
211(4)
J.S. Zhu
X. Wang
F.F. Zhang
R. Kang
Q. Liu
Synthesis of Main-Chain Polyimides Containing Azoaryl and their Third-Order NLO Properties
215(5)
J.P. Shi
L. Wei
H.W. Hu
T.C. He
X.Q. Zhang
C.S. Wang
G.Y. Lu
Preparation and Properties of Oxidized Coal/Polyaniline Composite Material
220(4)
X.P. Fan
A.N. Zhou
Synthesis, Crystal Structure and Photoluminescence of Eu(Phen)(DMF)2(NO3)3 (Phen = Phenanthroline and DMF = N, N-Dimethylformamide)
224(4)
J.L. Miao
D.Q. Bian
Y. Nie
M.L. Xu
B. Peng
D.D. Li
Z.W. Zhang
C.H. Hu
Synthesis, Characterization and Luminescence of Europium, Terbium Complexes of 1, 1'-(Pyridin-2, 6-Diyl) Bis-3-P-Tolylpropane-1, 3-Dione
228(6)
J.L. Zhu
S.L. Liu
L.C. Yu
T. Ouyang
Comparison between Vanadium Dioxides Produced by Ammonium Metavanadate and Vanadium Pentoxide
234(4)
J. Qi
C. Niu
Y.M. Xu
H. Hai
L. Zou
Electron Stimulated Surface Chemical Reaction Mechanism for Phosphor Degradation
238(4)
H.C. Swart
J.J. Terblans
I.M. Nagpure
S.S. Pitale
O.M. Ntwaeaborwa
Synthesis and Liquid Crystal Properties of a New Organometailic Palladium Complex
242(4)
J.Q. Liu
X.Q. Fu
J.Y. Song
Y.X. Fu
X.C. Zhang
W.G. Hou
Growth of p-Type AIN Crystals by C and Si Codoping
246(5)
H.L. Wu
R.S. Zheng
W. Zheng
Z. Yan
Promising Zn3Ta2O8: Pr3+ Red Phosphor for Low Voltage Cathodoluminescence Applications
251(4)
S.S. Pitale
L.L. Noto
I.M. Nagpure
O.M. Ntwacaborwa
J.J. Terblans
H.C. Swart
Optical Properties of the 3-D Composite Photonic Crystals Prepared by Modified Dip-Coating and Coating First Method
255(6)
G.Y. Yan
X. Zhang
Y.Z. Sheng
P. Huang
B.X. Feng
Synthesis and Properties of Poly(3, 4-Ethylenedioxythiophene) via Solid-State Polymerization
261(4)
S.A. Chen
J.K. Xu
D.H. Zhu
X.M. Duan
Structural and Optical Properties of CdS Thin Films Grown by Sputtering
265(4)
X.Y. Zhang
X.Y. Liu
H.B. Wang
X.J. Zhang
Q.P. Wang
H.L. Ma
Theoretical Studies on P-Type Conduction in (S, Cu) Co-Doped ZnO
269(5)
Z.H. Xiong
L.L. Chen
C.D. Zheng
Study on Arc Ion Plating Nitride Films of Microscopic Morphology and Micro-Hardness
274(6)
Q. Tao
Y.W. Sui
S. Zhi
W. Song
Studies on Donor-Acceptor Substituted with Triphenylamine-Core Fluorescent Derivatives
280(9)
C.Q. Zhou
B. Hu
C.H. Li
Q.P. Lou
Q.B. Song
C. Zhang
Study on Novel Method to Measure Luminescence Time Interval Between the Initial and Terminal of Light Emission in Frequency Domain
289(4)
J.Z. Huang
Q.L. Ma
R.X. Liu
P.J. Wang
A Cement Based Piezoelectric Composite Sensorfor Health Monitoring of Civil Engineering Structure
293(4)
S.F. Huang
J. Chang
L. Qin
X.M. Yang
Z.J. Li
X. Cheng
Electrochemical Polymerization of N-(9-Fluorenylmethoxycarbony)-Glycine and Characterization of its Polymers
297(4)
Y. He
W.J. Guo
G.Y. Zhang
M.S. Pei
Q.W. Pan
Effect of Shape Parameter on the Performance of 1-3 Piezoelectric Composites
301(4)
M. Sun
H. Wang
S.F. Huang
X. Cheng
Fabrication and Properties of 1-3 Polymer Modified Cement Based Piezoelectric Composites
305(4)
L.L. Guo
M.M. Li
M. Sun
D.Y. Xu
S.F. Huang
High Quantum Efficiency Dependence on Structure Optimizatin for Gallium Nitride Photocathode
309(6)
X.Q. Fu
X.H. Wang
Y.F. Yang
B.K. Chang
The Range Distribution of Nd Ions Implanted in Silicon-on-Insulator
315(4)
Y. Liang
H.Z. Li
S. Li
F.X. Wang
X.F. Qin
Poly[ N-(9-Fluorenylmethoxycarbonyl)-L-Phenylalanine] with Good Solubility and Good Blue Light-Emitting Properties via Electropolymerization
319(4)
C.Y. Lai
W.J. Guo
X.D. Tang
G.Y. Zhang
Q.W. Pan
M.S. Pei
Electrocatalysis Property of DNA-Hydroxyapatite Modified Electrode on Chloramphenicol
323(4)
N. Zhang
Y.F. Zhao
Y.X. Dai
D. Wu
B. Du
Q. Wei
Synthesis and Character of Fluorescence Reagent 3-P-Nitrylphenyl-5-(2'-Sulfonophenylazo) Rhodanine
327(4)
S.M. Wang
S.G. Ge
M. Yan
J.H. Yu
Synthesis of Large-Area and Monolayer of Graphene: Role of Transition Metal Support and Growth Time by CVD Method
331(5)
H. Gao
Y.F. Wang
Y.X. Liu
E.Q. Xie
P.M. Ajayan
Influence of Electroless Copper Deposition on the Electrochemical Performance of Si/MCMB
336(4)
M. Yan
W.Q. Gao
R.S. Xue
J.H. Yu
Mechanical and Thermal Behaviors of the Acrylic Based Core-Shell Rubber Modified Poly(Lactic Acid)
340(4)
N. Petchwattana
S. Covavisaruch
N. Euapanthasate
Preparation of N-Doped TiO2/NiO Composite Electrode and its Photoelectrochemcal Characteristics
344(4)
C.T. Wang
W.K. Zhang
H. Huang
X.Y. Tao
Synthesis and Fluorescence Properties of Hyperbranched Poly(Amido Amine) with New Fluorescence-Emitting Moieties
348(4)
S.F. Wang
D.D. Jia
C. Liu
D.J. Wang
Growth and Properties of Cubic Potassium Tantalate Niobate Crystals
352(6)
X.P. Wang
J.Y. Wang
B. Liu
Synthesis, Electronic States, and Electroluminescent Properties of Aluminum Complex Based on Mixed Ligands with 8-Hydroxyquinolinate and Acetylacetone
358(4)
L.Q. Chen
C.Y. Sun
X.G. Liu
B.S. Xu
Properties of Al Doped ZnO Thin films by DC Reaction Magnetron Sputtering
362(6)
F. Lu
Y. Sun
C.H. Xu
Process Research of Amorphous SiO2 for Optical Fiber Preform by Sol-Gel
368(4)
H. Tang
Y. Zhao
J.Z. Zhang
Y. Sha
L.G. Jin
Influence of Annealing Temperature on the Structure and Electrochromic Properties of NiOx Thin Films
372(9)
G.Y. Yan
X. Zhang
P. Huang
H.R. Liu
B.X. Feng
Chapter 4 Superconductive and Magnetic Materials
Effect of Finishing Temperature on Texture Evolution and Magnetic Properties in Heavy Cold Rolled High Silicon Steel Thin Sheets
381(4)
J.L. Liu
Y.H. Sha
F. Zhang
Y.C. Yao
J.C. Li
L. Zuo
ABS Fabrics Chemically Plated by Cu/Ni-P as Electromagnetic Shielding Material
385(4)
C.D. Yu
Q.B. Deng
P. Li
M.C. Wang
Y.F. Wang
Transmission Properties of Thue-Morse Quasi-Periodic 1D Superconducting Photonic Crystals
389(4)
J.J. Wu
J.X. Gao
Magneticbead-Based Enzyme-Linked Immunoassay for Detection Carcinoembryonic Antigen in Gastric Cancer Cells
393(5)
F.Q. Xia
Y.N. Yuan
Ground State and Transport Property in Superconductors with Artificial Pinning Arrays
398(6)
Q.B. Ren
Z.C. Zhou
J. Zheng
M.B. Luo
Synthesis and Characterization of Nano-Hexaferrites SrFe12O19 by Aqueous Solution Method
404(6)
J.A. Liu
M.M. Zhang
Y.F. Zhang
S.J. Liu
Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property
410(6)
L. Sun
F.T. Liu
Q.H. Jiang
X.X. Chen
P. Yang
Preparation of TbBO3 Powder and Growth of TbBO3 Crystal
416(9)
L.L. Cao
Y.Y. Chen
C.J. Lin
Z.B. Shen
F.Y. Guo
J. Ye
J.Z. Chen
Chapter 5 Structural Materials
Dry Sliding Wear Behavior of Hot Pressed Fe-28Al and Fe-28Al-10Ti Alloys
425(4)
J. Li
X.H. Fan
D.M. Sun
Grain Refinement of AZ91D Magnesium Alloy by In Situ Al4C3 Particles
429(4)
H. Han
H.M. Miao
S.F. Liu
Y. Chen
Dislocation Configurations in Single-Crystal Superalloys during High-Temperature Low-Stress Creep
433(5)
J.X. Zhang
H. Harada
Study on the Stability and Phase Transition of Precipitated Phases Al6Fe and Al3Fe in Al-Fe Alloy
438(5)
H. Qu
W.D. Liu
High Energy Micro-Arc Alloying of Mg-RE on AZ31 Mg Alloy
443(4)
C.J. Chen
Y.Z. Su
X. Xu
M. Zhang
Surface Oxygen Diffusion Hardened Titanium Material TC4
447(4)
C.J. Chen
Q. Cao
X. Xu
H.Y. Ma
Anomalous Change of the Electrical Resistivity and the Structure of Sn Melt with Temperature
451(4)
Z.X. Yang
H.R. Geng
N. Zhang
Improvement of Concrete Materials by Bacterial-Mediated Precipitation
455(4)
P.H. Li
W.J. Qu
Die Optimal Design for a Large Diameter Thin-Walled Aluminum Profile Extrusion by ALE Algorithm
459(4)
P. Liu
S.S. Xie
L. Cheng
High Temperature Electrochemical Synthesis of Tungsten Boride from Molten Salt
463(4)
X.Z. Cao
H.Y. Wang
X. Meng
C. Wang
H. Yang
X.X. Xue
A Fast Method for Determining Physical Properties of Slags with Contact Angle
467(4)
S.S. Lian
Y.Y. Lin
G.L. Zhang
M.R. Lu
Microstructure and Mechanical Behaviors of AZ91 Magnesium Alloy with Thermal Rate Treatment Technique
471(4)
Y.Z. Zhou
H.R. Geng
Y.J. Sun
M. Li
Temperature Effect of Refining Performance by Al-Ti-B (C) Master Alloys
475(6)
C.J. Gao
H.M. Ding
X.F. Liu
Densification Behavior and Pores Evolution of Selective Laser Sintering Parts during Post Microwave Sintering Process
481(4)
S.J. Lin
S.Y. Wang
Dynamic Crushing Behavior of the High-Density Closed-Cell Foams
485(4)
W. Chen
Z.X. Lu
Fatigue Characteristic and Dislocation Substructure of A356 Casting Alloy under Multi-Axial Cyclic Loadings
489(7)
D.F. Mo
G.Q. He
D.F. Liu
Z.Y. Zhu
Influence of the Parameters on the Laser Deposited TiAl Layer
496(4)
Y.B. Zhang
B.Y. Huang
H.X. Li
Effect of Heat Treatment on Thixoformed AM60B Alloy
500(5)
H.J. Huang
T.J. Chen
Y. Ma
Y.D. Li
Y. Hao
Microstructure Analysis of Mechanical Energy Aided Aluminized Layer on Stainless Steel
505(4)
X.C. Wang
M.S. Li
Q.G. Li
J. Zhang
J. Ma
Effects of Sintering Temperature on Properties of W-9.8Ni-4.2Fe Alloys Fabricated by Spark Plasma Sintering
509(5)
X.Q. Li
K. Hu
Z.C. Chen
H.W. Xin
Analysis of Cement Hydration Monitoring Using Embedded and External Ultrasonic Transducers
514(5)
Q.Q. Zhong
L. Qin
S.F. Huang
X. Cheng
Fracture Energy of Reactive Powder Concrete Based on Uniaxial Tensile Test
519(4)
H.Y. Yuan
M.Z. An
F.F. Jia
Z.G. Yan
Investigation of Cleavage Fracture Behavior in Notched Specimens of a Low Alloy Hot Rolled Steel 16MnR
523(8)
Y.G. Liu
Effect of MgO on Structure and Properties of CaO-Al2O3-SiO2 Glass System
531(4)
X.J. Xu
Y.L. Yue
H.T. Zhang
Z. Du
Study on Direct Annealing Process of Hot-Rolled Plate
535(4)
S.L. Li
X.D. Peng
Y. Chen
Semisolid Die-Casting Process of Mg-20Al-0.8Zn Magnesium Alloy
539(5)
F.Y. Yan
X.F. Huang
B. Li
Y. Ma
Coating of Electrode by Myristic Acid via Microwave Reaction
544(4)
W.J. Chen
C.B. Gui
J. Sun
Effect of Solution Treatment on Microstructures and Mechanical Properties of Centrifugal Casting Al-Cu Alloy
548(5)
J. Li
Y.W. Sui
A.H. Liu
X. Zhao
Z. Sun
TiN Modified Layer on the 20CrNiMo Steel Surface by Needle-Shape Cathode Glow Plasma Discharging
553(4)
F. Chen
J.Q. Chen
H. Zhou
Effect of Al Content on the Microstructure and Property of TiC/Al Ceramic Matrix Coating Deposited by Laser Cladding on Ti-6Al-4V Alloy
557(5)
J.H. Wang
J. Cheng
P.K. Bai
Y.X. Li
Influence of Ru on the Microstructure of Ni-Base Single Crystal Superalloys
562(10)
F. Sun
J.X. Zhang
Thermal Analysis of Functionally Graded Plates by Wavelet Method
572(5)
K.L. Ren
Y. Dong
Y.C. Wang
Durability of Mechanically Loaded Strain-Hardening Cement-Based Composites (SHCC)
577(5)
W.Q. Cao
L. Tian
T.J. Zhao
Effect of Mg-Zn-Y Quasicrystal Master Alloy on Microstructure and Mechanical Properties of AZ91 Alloys
582(6)
X.Y. Teng
T. Liu
G.R. Zhou
L.Y. Liu
Application of Styrene-Butadiene Rubber in Cement-Based Materials
588(6)
R. Wang
P.M. Wang
The Effect of B on the Microstructure and Property of Ultra-Thick Abrasion Resistant Flux-Cored Wire Deposited Metal
594(4)
J.S. Sun
L.F. Zhang
F.B. Li
Effect of TaC on W-Ti-Co Ultrafine Cemented Carbides
598(5)
C.C. Zhang
Q.Q. Yuan
Q. Wang
Z.Y. Sheng
L. Wang
Study on Microstructure and Properties of New Aluminum-Based Sliding Bearing Alloy
603(5)
C.C. Zhang
W.X. Wu
Q. Wang
L. Wang
Microstructure Evolution of Mg-6Zn-6Al Magnesium Alloy during Semi-Solid Partial Remelting
608(5)
X.F. Huang
K. Feng
Y. Ma
F.Y. Yan
T.J. Chen
Series of Al-P Master Alloy and Excellent Refining Performance on Hypereutectic A390 Alloys
613(6)
M. Zuo
X.F. Liu
Chapter 6 Polymer Materials
The Thickness Thinning Criterion of Vacuum Forming Refrigerator Inner Liner for HIPS
619(5)
W.B. Su
T. Li
X.B. Sun
B.J. Liu
Study on the Development of Reinforced Polypropylene Chopped Glass Fiber Sizing Agent
624(4)
X.R. Zhou
H.Y. Ge
D.Z. Wang
K.L. Shen
X.Q. Liu
Abrasion Behavior of Superhydrophobic Films Comprised of Polyurethane Elstomer
628(6)
C.H. Su
Y.Q. Xu
C.F. Li
R.M. Cong
H.S. Tan
The Synthesis of P-Sulfonatephenylazocalix[ 8]Arene and its Analytical Application
634(4)
L.L. Fan
C.N. Luo
H.M. Qiu
Z. Lv
F.G. Lu
Molecularly Imprinted Polymer for Preparation and Adsorption of Phenylalanine
638(4)
F.G. Lu
Y.L. Xi
Z. Lv
L.L. Fan
H.M. Qiu
C.N. Luo
Study on Synthesis and Adsorption Properties of Chitosan Modified by DMF Grafted β-CD
642(4)
Z. Lv
F.G. Lu
L.L. Fan
H.M. Qiu
C.N. Luo
Molecularly Imprinted Polymer Prepared by Precipitation Polymerization for Quercetin
646(3)
H.M. Qiu
C.N. Luo
L.L. Fan
Z. Lv
F.G. Lu
Kinetic Modelling and Finite Element Simulation of Natural Rubber Non-Isothermal Vulcanization
649(5)
W.G. Yao
Y.X. Jia
X.X. Wang
A Novel Thermoviscosifying Water-Soluble Polymer for Enhancing Oil Recovery from High-Temperature and High-Salinity Oil Reservoirs
654(4)
Y. Wang
Z.Y. Lu
Y.G. Han
Y.J. Feng
C.L. Tang
Study on the Curing Kinetics of Epoxy Resin in Self-Healing Microcapsules with Different Shell Material
658(5)
X.M. Tong
M. Zhang
M.Z. Yang
A High Throughput and High Selective Chemiluminescence Method for Quantification of Bifenthrin Based on Molecularly Imprinted Film
663(4)
D.J. Zang
L. Ge
P.N. Zhao
J.H. Yu
J.D. Huang
Study on Synthesis of Superabsorbent and Water Absorbency
667(4)
Y.B. Feng
H. Ren
J. Wang
Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative
671(4)
M. Yan
W.Q. Gao
S.G. Ge
J.D. Huang
J.H. Yu
Preparation of a Thermo-Sensitive Poly(N-Acryloyl Alanine Methyl Ester) for Controlled Drug Release
675(4)
K.L. Deng
H.B. Zhong
Y. Shi
J. Zuo
C.Y. Jiang
N. Li
X.J. Ji
P.F. Zhang
X.B. Ren
Preparation of Straight and Orderly Polypyrrole Microrods through Soft Template Methods
679(5)
L.B. Sun
Y.C. Shi
L.Y. Chu
B.C. Zhang
J.R. Liu
Influence of Test Conditions and Couple Materials on Frictional Characteristic of Polymeric Materials
684(4)
L.X. Jia
Y.Z. Zhang
Y.P. Niu
S.M. Du
J. Li
Synthesis, Characterization and Selective Recognition of Lead Using a New Ion Imprinted Polymer Material
688(4)
H.Y. Zhuang
H.Z. Li
Y. Xue
Modified Hydroxyl Value Assay and Application in Analysis of Molecular Ingredient of Polylactic Acid Oligomers
692(4)
Z.P. Qiu
J.D. Chen
J. Bu
R.D. Shu
The Electrochemical Polymerization of Polypyrrole Microstructures in an Aqueous Solution of Dodecylbenzenesulfonic Acid
696(5)
W.Q. Wang
R.F. Zhang
L.C. Lu
Application of Interpenetrating Silicone Waterproofing Material in the Protection of the Concrete
701(4)
J.S. Liu
D.G. Li
Synthesis of a New Ion Imprinted Polymer Material for Separation and Preconcentration of Traces of Neodymium Ions
705(4)
Q.P. Liu
H.Z. Li
H.Y. Zhuang
M.S. Pei
Synthesis and Properties of a Novel Conjugated Polyfluorene Derivative
709(4)
M. Yan
W.Q. Gao
S.G. Ge
J.D. Huang
J.H. Yu
Ammonium Polyphosphate with Crystal Form V by DAP+P2O5
713(4)
G.X. Zhao
G.S. Liu
Preparation of Conducting Polypyrrole in Gelatin Solution
717(5)
H.R. Ma
M. Li
C.D. Qiao
J.S. Yao
Plugging Performance Optimization Tests of Grouting Material for Sudden Water Inflow of Underground Engineering Construction
722(5)
L.P. Li
S.C. Li
J.S. Cui
Z. Li
Effect of Emulsifier of Sizing Agent on Properties of Sizing Agent and Carbon Fibers
727(6)
J. Chen
J.Y. Liu
H.Y. Ge
Chapter 7 Composite Materials
Finite Element Analysis of X-Cor Sandwich's Compressive Strength
733(5)
X.D. Dang
X.L. Wang
H.S. Zhang
J. Xiao
Vacuum-Free Stirring Brazing of SiCp/A356 Composites and Aluminum Alloy Using Semisolid Filler Metal with Low Solid Fraction
738(4)
H.B. Xu
Q.X. Luo
L. Xing
B.F. Zhou
Y.L. Zeng
C.H. Du
Corrosion Resistance of the Eletrodeposition Nano-TiO2/Ni Composite Coating on AZ91HP Mg Alloy
742(4)
S.R. Yu
Y. Liu
J.A. Liu
D.S. Yuan
Preparing of Army-Green Ceramic Coating on LY12 Alloy and the Study of Fastness to Ultraviolet Light
746(4)
J.M. Hao
D.X. Li
H. Chen
L.P. Li
Preparation of Sizing Agents for Carbon Fiber Adapt to Various Polymer Matrix
750(4)
J. Chen
J.Y. Liu
D.Z. Wang
X.R. Zhou
Thermal Shock Resistance of ZrO2 Fiber/Al2O3 Ceramics
754(4)
X.Q. Hou
J.Y. Liu
H.Y. Ge
Effect of the Chemical Treated Kevlar Fiber on the Behaviors of Cement Mortars
758(4)
S. Zhang
G.Z. Li
H.Y. Yuan
Study on Properties of Crops Fiber/Gypsum Composites
762(4)
H.Y. Yuan
M.R. Liu
G.Z. Li
Surface Modification of Cornstalk Fiber and Properties of Cornstalk Fiber/Gypsum Composites
766(4)
Y.Y. Wang
G.Z. Li
Structure and Properties of Organic-Vermiculite/Polyimide Composite Films
770(4)
X. Feng
F.Z. Lv
Y.H. Zhang
Y.Y. Wu
Grinding Characteristics and Removal Mechanisms of LaPO4/Al2O3 Micro-Nano Composite Ceramics
774(4)
W.L. Zhang
X. Wang
C.H. Liu
G.J. Jiang
Q.J. Zheng
Effect of Coupling Agent Modify Filler on the Electrical Properties of Sheet Molding Compounds
778(4)
D.L. Jin
Z.X. Huang
Y. Zhou
A Novel Model of Steady-State Sliding Wear with Electrical Current
782(5)
Z.H. Yang
Y.Z. Zhang
F.X. Chen
B. Shangguan
Study on the Preparation and Properties of α-PbO2-CeO2-TiO2 Composite Material on Aluminum-Matrix
787(5)
B.M. Chen
Z.C. Guo
H. Huang
Improve the Optical Properties of Rhodamine B by Encapsulating in Al-MCM-41
792(4)
D.M. Li
Z.Z. Tian
P.F. Wei
Preparation and Properties of Expanded Vermiculite Modified Bitumens
796(6)
H.L. Zhang
J.Y. Yu
Z.G. Feng
Fabrication and Tribological Properties of High Temperature Self-Lubrication Composites Prepared by Gas-Pressure Infiltration Technique
802(6)
Y.J. Wang
B. Wang
L.Y. Yang
S.R. Wang
The Isothermal Oxidation Behavior of Ti2AIN and Ti2AIN/TiN in Air
808(6)
M. Yan
Y.L. Chen
Y. Chang
J.X. Jiang
B.C. Mei
Influences of Polymer Fiber and Polymer Latex on Physical Properties of Cement Mortar
814(5)
S.H. Song
F.T. Liu
Effect of Dissolving of WC/W2C on the Interface Microstructure of Iron Matrix Hardfacing Alloys
819(4)
L.J. Li
C.B. Gui
Prediction of Heating Processing-Properties of Ti2AIC/TiAl Compound Materials Based on BP Neural Network
823(4)
M. Wen
Y.L. Yue
H.T. Zhang
Y. Li
Fractural Research on Ti2AlC/TiAl Compound Materials
827(4)
Y. Li
Y.L. Yue
H.T. Zhang
M. Wen
Process Optimization of Cefradine/ Montmorillionite in Solution Intercalation
831(4)
Y.Z. Zhao
W.J. Guo
L. Wang
Influence of Base Thickness on Properties of 1-3-2 Connectivity Cement Based Piezoelectric Composite
835(4)
X. Cheng
D.Y. Xu
S.S. Liao
S.F. Huang
An Exploration of 1-3 Cement/Epoxy Resin Based Piezoelectric Composite in Cement Hydration Reaction Process Monitoring
839(5)
D.Y. Xu
L. Qin
S.F. Huang
X. Cheng
Preparation and Properties of a Novel Water Soluble Core Material for the Resin Transfer Molding Process
844(4)
Q.Z. Li
X.Q. Wu
Study on Mechanical and Electromagnetic Shielding Properties of Carbon Fibers/Butyl Rubber Composite Films
848(4)
R.C. Yan
Z.H. Zhu
H. Song
X.J. Xu
X.M. Li
Study on Epoxy Based Magnetorheological Elastomers
852(5)
X. Wang
H.Y. Ge
H.S. Liu
Formation of SiC-Al Interface in SiC Whisker Reinforced Al Composite
857(4)
H.M. Wei
H.Y. Xu
L. Geng
Y.D. Huang
Preparation of Low-Heat Portland Cement Clinker with Coal Gangue
861(4)
G.L. Chen
X.H. Fu
W.H. Tao
Study on Properties of Organic Modified SiO2 Glass Prepared by Sol-Gel Method
865(4)
Y.L. Deng
Y.H. Sun
D.X. Cao
Influences of Modified Chemical Blowing Agents on Foaming of Wood Plastic Composites Prepared from Poly(Vinyl Chloride) and Rice Hull
869(5)
N. Petchwattana
S. Covavisaruch
Absorbing Properties of Fe-Based Amorphous Powder/S-Glass Fiber Reinforced Epoxy Composite Panels with Gradient Layer Structure
874(5)
X.M. Li
Z.H. Zhu
H. Song
Z.B. Liu
X.J. Xu
Study on Processes and Properties of Continuous Woven Roving Reinforced Polyurethane Composites
879(5)
X.L. Dai
X. Wang
J. Wang
The Effect of Different Optical Fibers on the Tensile Property of CFRPs
884(4)
H. Tian
J.H. Wang
Y.D. Ji
X.F. Hao
Y.Z. Yin
J.X. Sun
Determination of Creep Parameters of Conductive Asphalt Concrete
888(6)
S.L. Yan
W.T. Li
S.P. Wu
L. Pang
Natural Rubber/Bombyx Mori Silk Fibroin Composites: Preparation and Properties
894(7)
Q.H. Wang
Y.Y. Luo
Z.F. Yi
C.F. Feng
Y.Q. Wang
Z. Peng
Synthesis and Properties of Electroless Ni-P-W/Nano-Al2O3 Composite Coatings Deposited on Sintered NdFeB Permanent Magnet
901(8)
H.M. Chen
Y.H. Gao
Q. Lv
D. Yang
X.X. Lin
Part 2
Chapter 8 Constructional Materials
Research on Hydration of Waterproof-Typed Semi-Hydrated Gypsum
909(4)
J.Q. Li
M.Z. Gong
G.Z. Li
Preparation and Properties of Cement Mortar Modified by VAE Latex
913(4)
J. Chen
S. Zhang
J.Y. Liu
X.R. Zhou
Experimental Study on Influential Factors of Adiabatic Temperature Rise for Mass Concrete
917(6)
D.D. Wang
W.L. Tian
C.Q. Wang
Influence and Mechanism of Polymer Coating on Shrinkage of Cement-Based Materials
923(4)
L. Shi
J.Z. Liu
J.P. Liu
The Failure Mode and Anti-Crack Performance of the Steel Fiber Reinforced High Strength Concrete Four-Pile Cap
927(7)
D.Y. Gao
H. Fan
J. Lei
Preparation and Application of the Vesicant in Gypsum
934(4)
W.H. Zhang
G.Z. Li
Effects of LaCrO3 Composite Additive for the Hydration Resistance of MgO-CaO Refractory
938(4)
J.J. Sun
C.N. Yin
Y.J. Liu
S.Q. Liu
Application of New Concrete Materials in Channel Lining of the South-to-North Water Diversion Project
942(4)
W.L. Li
Y.T. Li
J.Y. Yu
Effects of Viscosity Modifying Admixtures on the Workability of Self-Compacting Concrete
946(5)
B.G. Ma
H.X. Wang
J. Xiao
L.X. Li
Z.B. Cheng
Study on Anti-Ultraviolet Radiation Aging Property of TiO2 Modified Asphalt
951(5)
S.S. Sun
Y.M. Wang
A.Q. Zhang
Research on High Performance Sulfoaluminate Cement Underwater Non-Dispersed Concrete
956(5)
D.C. Zhang
D.Y. Xu
X. Cheng
Effect of P2O5 on the Properties of Alite-Calcium Strontium Sulphoaluminate Cement
961(5)
C.N. Yin
L.C. Lu
S.D. Wang
Effects of CaF2 on the Formation Kinetics of Portland Cement Clinker
966(4)
C.F. Wang
Z.H. Zhou
C.X. Liu
X. Cheng
Study on Sintering Technology and Performance of Alite-Rich Cement Modified by C1.5Sr2.5A3S Mineral
970(5)
G.Q. Li
S.D. Wang
C.N. Yin
L.C. Lu
Study on the Adaptability Between the Amount of C3S Mineral in Alite-Sulphoaluminate Cement Clinker and the Fly Ash
975(5)
Y.C. Wu
X.C. Liu
B.L. Li
T. Liu
W.S. Wang
Y.J. Li
Influence of Species of Manufactured Sand on Basic Performances of Mortar
980(4)
Y.L. Wang
S.X. Liu
W.D. Wang
Y.J. Zhao
Study on Integral Utilization of Alkaline Slag and Fly Ash
984(5)
S.X. Wang
N. Li
Spectrophotometric Determination of the Ca Ion Content in Steel Slag by Using Chlorophosphonazo as the Spectral Chromogenic Reagent
989(5)
H.L. Zhao
X. Cheng
J. Chang
Study on Preparation and Properties of Cement-Based Foamed Lightweight Thermal Insulation Material
994(4)
C.C. Jiang
G.Z. Li
S. Zhang
Effect of Doped with BaO on the Formation Dynamics of Alite in Alite-Rich Cement Clinker
998(5)
S.D. Wang
X.Y. Guo
L.C. Lu
X. Cheng
Effect of Slag on Expansion of Alite-Calcium Barium Sulphoaluminate Cement
1003(4)
S.D. Wang
L.C. Lu
X. Cheng
Experimental Investigation on Related Properties of Asphalt Mastic Containing Recycled Cement Mortar Powder
1007(9)
J.Q. Zhu
S.P. Wu
J.J. Zhong
D.M. Wang
Thermally and Chemically Added-Calcium Composite Activation of Coal Gangue and its Application in Cement
1016(4)
X.Y. Song
J.Y. Han
Z.H. Gao
Influence of Slag and Fly Ash on the Self-Healing Ability of Concrete
1020(4)
Z.H. Zhou
Z.Q. Li
D.Y. Xu
J.H. Yu
Effect of Gypsum on Hydration Degree and Structure of Hardened Paste of Alite-Strontium Calcium Sulphoaluminate Cement
1024(5)
Q.Y. Li
L.C. Lu
S.D. Wang
Relationships of Strengths and Dimensional Effect of Plastic Concrete
1029(9)
D.Y. Gao
S.Q. Song
L.M. Hu
Application of Second Law of Fick in NaCl Attack of Sulphoaluminate Cement
1038(4)
Z.M. Ye
L.C. Zheng
L.H. Wan
X. Cheng
Study of Adsorptive Behaviors of Aminosulfonic Acid-Based Superplasticizer on the Calcium Sulphoaluminate Mineral
1042(5)
T. Liu
Y.J. Li
B.L. Li
Y.C. Wu
W.S. Wang
X.C. Liu
Design and Choose Assessment Parameter for Concrete Performance of Anti-Sulfate Erosion
1047(4)
H.X. Qiao
H.F. Yu
Z.M. He
Preparation of Nano Rice-Husk Ash and Effect on the Water-Resistance of Magnesium Oxychloride Composites
1051(4)
K.J. Xu
J.T. Xi
Y.Q. Guo
Effect of M0O3 on the Clinkers Formation of Portland Cement
1055(5)
L.B. Yu
Z.P. Xu
G.W. Dong
Y.N. Zhu
Microwave Synthesis of Dicalcium Silicate: - Comparison with Conventional Synthesis
1060(6)
H.Z. Jiang
Q. Hao
J. Zhou
J.J. Li
Performance of Belite-Barium Calcium Sulphoaluminate Cement Prepared by Substituting Fly Ash for Clay
1066(5)
P.Q. Zhao
W. Zong
S.D. Wang
G.Y. Wang
L.C. Lu
Pond Ash: An Alternative Material as Fine Aggregate in Concrete for Sustainable Construction
1071(5)
B. Ganesh
H. Sharada Bai
R. Nagendra
S. Bagade
Research on the Performance of Ba-Bearing Aluminoferrite Cement
1076(4)
W.J. Tan
J. Chang
Z.M. Ye
Research on Enzymatic Hydrolysis Lignin Modified Petroleum Asphalt
1080(4)
Z.D. Zhao
Y. Xie
X.S. Cheng
Y.Q. Jin
M.Y. Xu
Experimental Research on Compressive Strength of Self-Compacting Concrete with Recycled Coarse Aggregates
1084(4)
J. Li
X.F. Qu
L.F. Wang
C.Q. Zhu
J. Li
Influence of Compounding Malic Acid with Plasticizers on Hydration Heat of α-Calcium Sulphate Hemihydrate
1088(8)
P.M. Wang
W. Pan
Influence of Limestone Powder on Performance of the Pre-Mixed Cement Mortar
1096(5)
X.Z. Zhang
C.S. Han
X. Yin
Effect of Mixed Material on Sulphoaluminate Cement Sulfate Attack Resistance
1101(5)
G.Y. Wang
L.C. Lu
S.D. Wang
P.Q. Zhao
Study on Using Low Quality Fly Ash to Produce Baking-Free Bricks
1106(4)
W.H. Tao
X.H. Fu
Z.X. Yang
Corrosion Behavior of Super-Hydrophobic Surface on Fe3Al in Seawater
1110(8)
P. Wang
Y.S. Yin
T. Liu
The Study on Accelerated Life Mechanism of Glass Fiber Reinforced Magnesium Oxychloride Cement
1118(4)
J.M. Dong
H.F. Yu
Q.Q. Liu
Pore Structural Changes and Carbonated Depth of Carbonated Steel Slag
1122(4)
H.Z. Wu
J. Chang
H. Wang
Influence of Mechanical Behavior of Adhesives on Shear Stress Distributions in the Single-Lap Adhesive Joints
1126(7)
X.C. He
Chapter 9 Nano Materials
Photoluminescence Properties of InGaN/GaN Multiple Quantum Well Light Emitting Diodes by Metalorganic Chemical Vapor Deposition
1133(5)
T.W. Kuo
L.M. Kong
Z.C. Feng
W. Liu
S.J. Chua
Y.S. Huang
Heat Transfer Analysis of the Micron-Scale Agglomerates of TiO2 Precursor during the Detonation Process
1138(4)
Y.D. Qu
X.J. Li
H.H. Yan
Y3Al5O12 Nanocrystallites Prepared from a Novel Crystalline Precursor
1142(6)
R.J. Han
D. Gao
K.Z. Chen
Facile Synthesis of Cobalt Oxide Uniformly Coated on Multi-Wall Carbon Nanotubes for Supercapacitors
1148(5)
L.Y. Gong
L.H. Su
Effects of Conductive Supports on the Growth and Capacitive Performance of Nanostructured Manganese Oxides
1153(4)
N. Guo
Z.Y. Qin
Large-Sized TiO2/SiO2 Macroporous Materials for Photo-Degradation of Organic Compounds in Water and Air
1157(5)
R.F. Zhang
J. Ye
N.B. Long
Synthesis and Characterization of Sol-Gel Derived Magnesium Tantalate Nanopowder
1162(4)
Y.S. Jiang
J.H. Luo
Z. Li
L.N. Chen
Density Functional Theory Study of Influence of Hydrogen Absorption on the Field Emission Properties of Carbon Nanotubes
1166(4)
K. Sun
Z.Q. Fan
X.Y. Liu
Influence of Treatment of Hydrogen Plasma on Field Emission Properties of Carbon Nanotubes Films
1170(4)
Z.Q. Fan
H.F. Ou
R. Li
G.W. Cai
J.D. Zhang
Synthesis, Photophysical Properties and Aggregates of a New Pyridinium Dye
1174(4)
Y.H. Sun
Y.L. Deng
D.X. Cao
Z.Q. Liu
Effect of Volume Fraction and Temperature on Thermal Conductivity of SiO2 Nanofluids
1178(4)
B.J. Zhu
W.L. Zhao
D.D. Li
J.K. Li
Conducting Polymer Functionalized Single-Walled Carbon Nanotubes: Synthesis, Morphological Characteristics and Thermal Stability
1182(4)
H.M. Niu
Synthesis and Characterization of Nanocrystalline Mg4Nb2O9 by the Modified Sol-Gel Method
1186(4)
Y.N. Zhu
X.J. Liu
Y.S. Jiang
Z.M. Ye
L.B. Yu
Y.L. Ding
Facile Synthesis and Properties of CdxZn1-xSe Alloy Nanocrystals
1190(4)
R.L. Zhang
N. Liu
Z.M. Yuan
J. Yang
Y.L. Zhang
A.Y. Zhang
Y.Q. Cao
Y.N. Zhu
P. Yang
Preparation and Photoluminescence of Hybrid SiO2-Coated CdTe Nanocrystals
1194(4)
N. Liu
Z.M. Yuan
J. Yang
Y.L. Zhang
R.L. Zhang
Y.Q. Cao
A.Y. Zhang
Y.N. Zhu
P. Yang
Anatase Nano Titanium Oxide Synthesized Using the Hydrothermal Method and its Optical Absorption Properties
1198(5)
X.M. Fu
Z.W. Liu
Synthesis and Properties of CdSe/CdxZn1-xS Quantum Dots
1203(4)
J. Yang
Y.L. Zhang
R.L. Zhang
N. Liu
Z.M. Yuan
A.Y. Zhang
Y.Q. Cao
Y.N. Zhu
P. Yang
Synthesis of α-Ni(OH)2 Peonies Assembled from Nanosheet Building Blocks and Corresponding NiO Porous Peonies
1207(4)
Y. Yan
W.J. Kang
J.F. Li
Y.T. Qian
Synthesis of Carbon/Carbon Core/Shell Nanofibers by Co-Pyrolysis of Tetrahydrofuran and Ferrocene
1211(4)
W.J. Kang
H.B. Li
Y. Yan
Y.T. Qian
Carbon Nanotubes-Doped Glassy Carbon Ceramic Composite Electrode and its Electrocatalytic Reduction of Nitrite
1215(6)
D.Z. Sun
Electrocatalytic Reduction of Nitrite at Carbon-Nanotube-Modified Glassy Carbon Electrodes
1221(4)
D.Z. Sun
The Effect of Alcoholic Reducing Agent on Morphology and Structure of VO2 (B) Nano-Particles
1225(4)
J. Qi
C. Niu
Characterization and Properties of Sol-Gel-Derived Polyurethane Acrylate/Silica Hybrid Materials
1229(4)
Z.H. Yang
J.H. Wang
Y.D. Ji
Y.Z. Yin
Preparation and Characterizations of Na2Ti3O7, H2Ti3O7 and TiO2 Nanobelts
1233(5)
Y.M. Wang
H. Liu
The Microstructure of Zinc Oxide Films Prepared by Hydrothermal Method
1238(4)
Z.L. Xia
Q. Xu
L.X. Zhao
Temperature Dependent Photoluminescence of ZnO Nanorods Synthesized by Hydrothermal Method
1242(5)
P. Wang
L.B. Fan
L.X. Shi
B. Fang
Effect of Reaction Temperature on the Morphology of Carbon Nanofibers
1247(5)
L.Y. Yu
L.N. Sui
H.Z. Dong
L.F. Dong
Preparation and Characterization of Poly(Acrylamide)/Silica Nanocomposite Gels
1252(5)
L.L. Wu
L.Z. Zeng
H.B. Chen
C.C. Zhang
Characterization and their Fluorescence of Fe3+-Doped La2Zr2O7 Nanocrystals by a Salt-Assistant Combustion Method
1257(5)
Y.S. Bai
L.D. Lu
J.C. Bao
Photoluminescent Properties of TGA-Capped CdTe Quantum Dots
1262(4)
Z.M. Yuan
J. Yang
Y.L. Zhang
R.L. Zhang
N. Liu
Y.Q. Cao
A.Y. Zhang
Y.N. Zhu
P. Yang
Facile Fabrication of Free-Standing Titanium Dioxide Nanorods Array with Highly Efficient Ultraviolet Light Induced Photocatalytic Activity
1266(5)
T. Zeng
H. Xie
X.T. Sui
X.J. Zhao
The Preparation of Nano-Sized Lead Sulfide in High Power Pulse Ultrasonic Reactor
1271(4)
M. Shui
J. Shu
Y.L. Ren
R.F. Zhang
Synthesis and Characterization of Mesoporous Silica Nanoparticles Embedded Gadolinium Oxide
1275(5)
N.Q. Luo
Z.Y. Huang
P. Luo
Y.Z. Shao
D.H. Chen
A Solid-State Reaction Route to Synthesize Crystallinic FeB Nanoflowers and their Magnetic Properties
1280(4)
J.F. Li
Y. Yan
Y.T. Qian
A Novel Method for Preparing High Efficient Fluorescence-Encoded Microspheres with Semiconductor Nanocrystals
1284(5)
H. Yu
L. Tao
Influence of Doping Methods on the Gas-Sensing Properties of CuO-SnO2 Sensors
1289(7)
Z.D. Lin
W.L. Song
H.M. Yang
J.C. Zheng
Water-Based Polyurethanepolyaniline Conductive Core-Shell Latex Nanoparticles
1296(4)
T.L. Zhang
Z.Y. Qin
Correlation of Structural and Optical Properties of nc-Ge/a-Si Multilayers Grown by Ion Beam Sputtering
1300(4)
C. Song
R. Huang
X. Wang
J. Song
Y.Q. Guo
Influence of Different Processing Parameters on the Structure of Anodic Aluminum Oxide Membrane
1304(7)
X.L. Sun
A.M. Li
W.F. Dong
K.N. Sun
M. Du
W.L. Wang
Preparation and Characterization of Mg(OH)2 Flame-Retardant with Particular Morphology via Hydrothermal Process
1311(6)
L.M. Ji
L.J. Li
Z.Q. Liu
B. Zhang
F. Nie
Z.M. Zeng
F.G. Song
Y.H. Zhang
X.H. Jia
Finite Element Analysis of High Pressure Torsion Processing
1317(4)
Q. Guan
C.D. Zhu
T.L. Dai
Phase Diagram of the LiCl-MgCl2-Na2cSiO3-H2O System at 150°C and Synthesis of Hectorite
1321(4)
J. Wang
Y.Z. Jia
Y. Yao
J.H. Sun
J. Ma
X.J. Yin
Q. Luo
Y. Jing
Synthesis of Carbon Nanotubes, Carbon Spheres and Slices of Vertically Aligned Multi-Walled Carbon Nanotubes
1325(5)
S.S. Yao
Characterizations and Crystal Structure of Metallic Ion Doped Titania Nanofiber by Sol-Gel Method
1330(4)
Y. Lu
C.L. Shao
P. Zhang
M.Y. Zhang
Z.Y. Zhang
X. Zhang
M.Y. Li
W.W. Sun
Synthesis of CdS Quantum Dots for Detection of Copper (II) Using Fluorescence Spectroscopy
1334(4)
M. Zhang
F.W. Wan
S.G. Ge
J.H. Yu
CdSe Quantum Dots Decorated by 3-Aminobenzeneboronic Acid as Fluorescence Probe for Glucose
1338(4)
S.W. Wang
X.O. Zhang
J.H. Yu
Hard-Templating Synthesis of Mesopours La1-xSrxMnO3+σ Perovskite and Catalysis Activity in CO Oxidation
1342(8)
X.H. Huang
M. Li
Synthesis of CdTe and CdTe/CdS Core-Shell Quantum Dots and their Optical Properties
1350(4)
J.J. Lu
S.G. Ge
F.W. Wan
J.H. Yu
Determination of Interdiffusion Coefficient in Nanolayered Structures by Auger Electron Spectroscopical Sputter Depth Profiling
1354(6)
J.Y. Wang
Preparation and Dispersion of Polyacrylamide-Grafting Graphene
1360(4)
L.L. Wu
X. Lv
C.C. Zhang
Electron Microscopy Study of Y-Shaped Carbon Fibers with Different Morphologies
1364(5)
Q. Zhang
L.F. Dong
Complexional Ultrafine Zinc Oxide Powders Prepared by Controlled-Release Precipitation
1369(6)
Z.F. Tong
Y.J. Li
L.X. Lian
Preparation and Characterization of BCN-TiO2 Nanoparticles
1375(4)
L. Zhang
L. Li
Z.G. Mou
X.F. Li
Study on Amorphization of Mechanical Alloyed Cu50Zr40Ag10 Alloy
1379(4)
L.Y. Xia
Y. Wang
Effect of Reaction Temperature on Carbon Nanotubes
1383(4)
Y.C. Yue
W. Ren
M.L. Zhao
M.X. Guo
Y.T. Zhang
J. Xia
D.J. Li
Numerical Simulation of Dense Phase Pneumatic Conveying Gypsum in Stepped Pipeline
1387(6)
W.X. Wu
Z.M. Liu
G.B. Duan
Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel
1393(5)
H.X. Liu
S. Chen
R. Shao
R. Dong
M.L. Jia
Nanocrystalline ZrO2 Porous Ceramics Fabricated by SPS
1398(4)
D. Zhang
M.G. Wang
Z.K. Zhao
The Electrical and Optical Properties of Al-Doped ZnO Thin Films Prepared by Atomic Layer Deposition
1402(4)
J. Song
H.C. Mu
L.X. Jiang
G.L. Yin
Z. Yu
D.N. He
Electrodeposition of Au/Brush-Zn Heterojunction Nanowires
1406(6)
X. Zhao
Y.Z. Wu
X.P. Hao
Comparison on Optical Properties of Cu-Al2O3 and Co-Al2O3 Nano-Array Composite Structure
1412(4)
M.M. Zheng
F.Q. Wu
H. Wu
B.Q. Cao
Visible-Light Photocatalytic Activity of the Bi2Ti4O11 Nanorods
1416(4)
W.W. Zhao
C.Y. Zhang
Y.W. Liu
X.P. Huang
F. Mao
Repeated Synthesis of MCM-48 Microspheres with a Fixed Ethanol-to-Water Ratio
1420(5)
L.L. Qin
H. Zhao
H.X. Wang
S.Q. Liu
The Influence of the Temperature on the Light-Sensitive Character of WO3 Nanorods Synthesized by the Hydrothermal Method
1425(5)
X.M. Fu
C.C. Xie
L.Y. Zhou
β-Ni(OH)2 Flower-Like Spheres and Nanoflakes Synthesized Using the Hydrothermal Method and its Formation Mechanism
1430(5)
X.M. Fu
Z.W. Liu
L.Y. Zhou
C.C. Xie
A Strategy to Produce Single and Double Layer Graphene Sheets
1435(5)
S.R. Dhakate
N. Chauhan
S. Sharma
R.B. Mathur
Ultrasensitive Chemiluminescence Detection of Indoleacetic Acid Catalyzed by Silver Nanoparticles
1440(4)
W.W. Liu
W.H. Liu
X.M. Mu
P.X. Gong
W. Cao
A Study on Mechanism of Tribological Behavior of Carbon Nanotubes
1444(6)
R. Li
Y.Z. Hu
H. Wang
Preparation and Characterization of Cerium-Doped Tin Oxide Gas Sensors
1450(9)
H.Y. Xu
X.Q. Chen
L.Z. Fang
B.Q. Cao
Chapter 10 Environmental and Green Materials
Photocatalytic Properties of F-TiO2/Ti Photoelectrodes Prepared by Microarc Oxidation Method under Visible Light Illumination
1459(5)
Y.J. Xin
D.J. Cui
Mechanical Properties Simulation of Squeeze Cast Magnesium Alloy
1464(4)
Z.H. Guo
H. Hou
S.W. Qu
Iron Doped Lanthanum Stannate Pyrochlores (La2Sn2-xFexO7) for the Simultaneous Catalytic Removal NOx and Soot
1468(5)
Z.P. Wang
Z.Z. Wang
X. Wang
Q. Li
Z.G. Mu
Z.L. Zhang
Experimental Research on Mechanical Properties of Coal Paste Filling Material
1473(4)
C.Z. Zhao
H.Q. Zhou
Study on the Kinetics of Phosphor-Gypsum Pyrolysis
1477(7)
M.K. Zhou
G.L. Ying
B.X. Li
T. Xie
Ecological Barium-Crystal Glass Based on Thailand Quartz Sands Doped with Zirconium Dioxide
1484(4)
K. Won-In
S. Pongkrapan
P. Dararutana
The Phosphorus Removal Characteristics of Grain-Slag as Filter Media
1488(4)
Y. Feng
Y.Z. Yu
M.T. Li
L. Cheng
Electrochemistry Characterization of Ionic Liquid-Type Phosphomolybdic Salt with Modified Electrode
1492(4)
Z.Y. Li
X.M. Xu
C.L. Zhou
D.Z. Sun
Preparation of a Novel Poly-Silicic-Ferric Coagulant from Fly Ash Extract
1496(4)
J. Tan
Y.Z. Yu
Y. Sun
The Research of Fired Grain Slag Brick
1500(4)
Y.Z. Yu
J. Tan
L.L. Gao
Multiple Objective Preform Die Shape Optimization Design for Controlling Forging's Shape and Deforming Force during Forging Process
1504(4)
X.H. Zhao
G.Q. Zhao
X.H. Huang
Y.G. Luan
Synthesis and Application of an Efficient and Stable Solid Acid Catalyst St-c-AS
1508(4)
S.H. Liu
P.R. Meng
L.J. Yu
Y.M. Zhang
X.H. Wang
Suppressing the Powdering of Zirconia Fibers after High-Temperature Application by Large Additions of Yttria
1512(4)
X.Q. Hou
A New Treatment Method of Pineapple Leaf Fiber for Textile Use
1516(4)
Z.F. Li
G.L. Liu
C.W. Yu
Preparation and Oxygen Intake/Release Characteristics of YBaCo2Fe2O7
1520(4)
S.M. Zhang
H.Z. Song
X.H. Su
J.F. Jia
D.L. Yang
H.W. Sun
X. Hu
Extraction Behavior of Scandium Cation in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 2-Ethylhexyl Phosphonic Acid-2-Ethylhexyl Ester
1524(4)
Z.W. Pan
G.Q. Li
L.B. Lin
Anaerobic Biohydrogen Production by the Mixed Culture with Mesoporous Fe3O4 Nanoparticles Activation
1528(4)
W. Zhao
J. Zhao
G.D. Chen
R. Feng
J. Yang
Y.F. Zhao
Q. Wei
B. Du
Y.F. Zhang
Study on Solvent Extraction of Fast Pyrolysis Bio-Oil
1532(5)
Q.K. Tian
L. He
H. Zhang
Z.L. Lv
R. Li
Research Progress in Protective Organic Silane Films
1537(4)
X.L. Ran
T.Y. Li
Study on the Treatment of Domestic Sewage with Water Quenched Slag Biological Aerated Filter
1541(4)
Y.Z. Yu
Y. Feng
L. Cheng
Investigations of Adsorption of 1-Dodecyl-3-Methyl Imidazolium Chloride on Iron Surface as Corrosion Inhibitor
1545(4)
Q. Zhao
M.S. Pei
W.J. Guo
S.N. Wang
Effects of Li2O on Properties of Low Fluoride Content Mould Flux for High Speed Continuous Casting
1549(4)
Y.Q. Lu
G.D. Zhang
M.F. Jiang
Effect of Kaolin on the Properties of Flue Gas Desulphurization Gypsum-Steel Slag Cementitious Materials
1553(4)
L. Zhang
Z. Wang
L.Y. Fan
G.P. Shi
The Relationship Between the TiO2 Photocatalyst Deactivation, Regeneration and the Concentration of the Surface Adsorbed SO42
1557(6)
Y. Huang
Z.H. Zhou
Y.P. Wu
Y.C. Meng
S. Shen
Preparation and Characterization of Hydrophilic PVDF Membrane via Graft Modification by Acrylic Acid
1563(6)
L.G. Wang
X.G. Zhang
S.F. Hou
X.J. Wang
A.M. Wang
S.Q. Liu
Experimental Research on Durabilities of Coal Gangue Concrete
1569(7)
J.M. Guo
L.L. Zhu
Synthesis and Characterization of Mesoporous SAPO-11 by Using Carbon Particles
1576(4)
J. Liang
F.P. Wang
The Application of Peroxide in the Degumming Process of Ramie
1580(5)
G.L. Liu
Z.F. Li
R.Y. Ding
C.W. Yu
The Key Problems in the Manufacturing of the Bamboo Buffer Packaging Material
1585(4)
Y. Liu
S.Y. Qi
Z.Y. Shi
GGBFS Activated by Tetra-Isopropyl Titanate
1589(7)
C.J. Zhu
H.Q. Ru
C. Zhang
Floc's Formation and Settlement of Organic Poly-Silicic-Ferric Coagulant
1596(4)
Y. Fu
X.Y. Zhang
N. Shil
J.C. Zhang
Mathematical Modeling and Numerical Simulation of Fouling Processes of Polymeric Ultrafiltration Membrane
1600(4)
W.C. Song
Y.X. Jia
T.F. Shi
Study on the Oil-Absorbing Materials with Waste Plastics
1604(5)
Y.J. Gong
S.S. Qiu
Y. Zhang
J.P. Wei
Analysis of Photo-Degradation of Dyed Veneer by XRD and SEM
1609(4)
Y. Liu
J.M. Gao
L.M. Shao
H.W. Guo
Research on Strategy-Oriented Management of Environment Performance of County and Municipal Party and Government Leaders
1613(6)
J.K. Zhou
Study on Performance of Al-Zn-In-Mg-Ti Sacrificial Anode
1619(4)
Y.B. Huang
G.W. Song
H.D. Ding
X.H. Shao
Study on the Addition of SiO2 into Lithium-Iron-Phosphate Glass
1623(4)
R.J. Yang
Y.H. Wang
H.L. Liu
S.Q. Liu
Biomimetic Hemocompatible Nanofibrous Scaffolds as Potential Small-Diameter Blood Vessels by Bilayering Electrospun Technique
1627(4)
H.Y. Wang
Y.K. Feng
H.Y. Zhao
R.F. Xiao
J.T. Guo
Grafting Sulfoammonium Zwitterionic Brushes onto Polycarbonateurethane Surface to Improve Hemocompatibility
1631(4)
Y.K. Feng
D.Z. Yang
H.Y. Zhao
J.T. Guo
Q.L. Chen
J.S. Liu
Electrochemical Properties of PANI/CNTs Composites Modified by Oxygen Plasma
1635(5)
C. Li
L. Zhang
K. Wang
Fluorescent Sensors for Nitroaromatic Compounds Based on the Comb-Like Polysiloxane-Acrylate
1640(5)
Y.Z. Cui
X.L. Ren
X.M. Dong
Y.T. Wang
Flexible and Ordered Macroporous PMMA Polymers Films
1645(4)
L.E. Deng
Y.S. Wang
M. Fu
Synthesis and Characterization of Highly Regioregular Poly (3 - Hexylthiophene)
1649(4)
C.Y. Zhou
L.T. Yan
L.N. Zhang
X.D. Ai
T.X. Li
Experimental Study on Uniaxial Time-Dependent Cyclic Deformation of POM/PTFE Blends
1653(5)
Z.W. Zhu
X. Liu
G.Z. Kang
L.X. Cai
Preparation of L-Tryptophan Imprinted Polymer Microspheres in Aqueous Media by In Situ Grafting on Surface
1658(5)
J. Ding
S.S. Chen
X. Li
X.G. Ying
S.F. Jiang
S. Weng
W.Y. Zhang
The Properties and Hydrolysis of Polysiloxanes with Cyanoethyl Groups
1663(4)
R.F. Guan
Y.R. Dong
Synthesis and Application of Molecularly Imprinted Sol-Gel Film for Simultaneous Determination of Multi-Component Pesticide Residue
1667(6)
S.G. Ge
P.N. Zhao
J.H. Yu
J.D. Huang
Influence of the Heating Conditions on the Asphalt Compositions by Grey System Theory
1673(5)
M. Yu
S.P. Wu
Relation of 2D Permeability and Preform Structure Parameters
1678(5)
J.H. Jiang
N.L. Chen
Effect of Super-Absorbent Polymer as Admixture on the Mechanical Properties of Mortars
1683(5)
T. Yang
N. Sun
W.J. Guo
J. Zhang
M.S. Pei
Y.F. Wei
S.N. Wang
Synthesis and Properties of an Amphoteric Superplasticizer Compatible with Sulphoaluminate Cement
1688(5)
N. Sun
J.J. Qin
W.J. Guo
J. Zhang
M.S. Pei
Y.F. Wang
S.N. Wang
Effect of Glycerol on the Self-Assembly of P123 in a Room-Temperature Ionic Liquid [ Bmim]PF6
1693(5)
X.N. Li
M.S. Pei
L.Y. Wang
L. Wang
Effects of UV Aging on the High-Temperature and Fatigue Performances of Asphalt Mortar
1698(4)
L. Pang
L. Long
S.P. Wu
W. Lu
Preliminary Study on Asphalt Mortar Containing Shaped-Stabled Phase Change Material
1702(5)
M.Z. Chen
G.J. Xu
S.P. Wu
W. Lu
Investigation on Static Shear Creep Behavior of Asphalt Mastic Containing Recycled Red Brick Powder
1707(5)
Y.H. Sun
S.P. Wu
J.Q. Zhu
J.J. Zhong
Preparation, Characterization and Microwave Absorption Properties of Nano/Micro Carbon Fiber
1712(5)
X.P. Duan
J.H. Jin
S.L. Yang
G. Li
Preparation and Properties of Enzymatic Hydrolysis Lignin Modified Thermoplastic Starch Composites
1717(5)
B. Liu
Q.F. Lv
R. Fang
X.S. Cheng
Growth and Magneto-Optical Properties of CaTbAlO4 Crystal
1722(6)
M. Mei
L.L. Cao
Y. He
R.R. Zhang
F.Y. Guo
N.F. Zhuang
J.Z. Chen
Synthesis of Nanocrystalline (W, Ti)C from Respective Elemental Powders by Mechanical Alloying and Spark Plasma Sintering
1728(7)
J.H. Liang
C. Yang
X.Q. Li
S.G. Qu
Y.Y. Li
Study on the Preparation and Mechanical Properties of Polystyrene/Y2O3 Composites
1735(6)
Y.L. Dou
C.L. Zhang
G.E. Sun
W.H. Xu
Catalytic Synthesis of Dioctyl Phthalate over Al-MCM-41 Molecular Sieves
1741(6)
H.F. Zhou
Y.J. Yang
J.S. Zhang
Microstructures of Graphite/Copper Composites Prepared by Mechanical Milling and Hot Extrusion
1747(6)
Y.P. Jin
M. Hu
The Influence of Solvent Metal Microstructure on Synthetic Quality of Diamond Single Crystals
1753(4)
X.H. Fan
B. Xu
C. Gao
Influence on Activation Property of Calcined Coal Gangue by [ SO4]2+
1757(4)
C.C. Gong
D.X. Li
The Effect of Depositing Time on the MPCVD of Diamond on Porous Carbon Monolith
1761(6)
Q. Mei
X.J. Yu
B.Y. Zhao
R.B. Li
Y.J. Lay
K.A. Hu
Photocatalytic Property of Amorphous WO3 Films Prepared by Reactive Magnetron Sputtering
1767(6)
J.M. Huang
Y.Y. Liu
G.P. Wan
Synthesis and Characterization of Silicone Based Pressure Sensitive Adhesive
1773(6)
M. He
Q.Y. Zhang
J.Y. Guo
The Preparation of TiO2 Nanotube Arrays
1779(6)
L.X. Pang
P.F. Cuan
H. Shi
X.D. Tang
Synthesis and Characterization of Water Based Acrylic Pressure Sensitive Adhesive of Surface Protection Tape
1785(8)
M. He
Q.Y. Zhang
J.Y. Guo
Keyword Index 1793(12)
Author Index 1805