Muutke küpsiste eelistusi

Optics Design and Precision Manufacturing Technologies [Pehme köide]

Edited by , Edited by , Edited by , Edited by
  • Formaat: Paperback / softback, 1386 pages, kõrgus x laius x paksus: 240x170x69 mm, kaal: 2800 g, Illustrations, unspecified
  • Sari: Key Engineering Materials
  • Ilmumisaeg: 15-Feb-2008
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 0878494588
  • ISBN-13: 9780878494583
Teised raamatud teemal:
Optics Design and Precision Manufacturing TechnologiesSuurem pilt
  • Formaat: Paperback / softback, 1386 pages, kõrgus x laius x paksus: 240x170x69 mm, kaal: 2800 g, Illustrations, unspecified
  • Sari: Key Engineering Materials
  • Ilmumisaeg: 15-Feb-2008
  • Kirjastus: Trans Tech Publications Ltd
  • ISBN-10: 0878494588
  • ISBN-13: 9780878494583
Teised raamatud teemal:
Püsilink: https://www.kriso.ee/db/9780878494583.html
Märksõnad:
Selected from the Proceedings of the Asia Pacific Conference on Optics Manufacture 2007 (co-organized by Tsinghua U. Industrial Technology Research Institute in Taiwan, Harbin Institute of Technology in China, and the U. of Huddersfield in the UK), the 235 peer reviewed papers in this two-volume set present recent research findings and developments in the areas of optical design, advanced optics manufacturing technology, and optical measurement. A few examples of topics addressed include diamond turning freeform optics, machining of micro-structured optical molds, manufacturing process optimizing of lightguiding plate for soft computing, absolute measurement of aspheric surfaces using white-light interferometry, analytical calculation of the light extraction efficiency of micro cavities light-emitting diodes, ultraprecision ductile-regime cutting of optical glass, kinematics calibration of parallel kinematic machine using a developed double-ball bar gauge, effects of the tool angles on the machined surface quality of KDP crystal in diamond turning, laser patterning indium tin oxide thin films on glass substrates, stiffness analysis for a novel parallel-robot based high-precision flexible assembly fixture, and advanced smart high ratio zoom system with global optimization. Annotation ©2008 Book News, Inc., Portland, OR (booknews.com)
Preface v
PART 1
Diamond Turning Freeform Optics
1(6)
W.D. Jiang
B. Tse
R. Louie
F. Chan
Fabrication of Light Guide Plate on PDMS-Based Using MEMS Technique for Application of LED-Backlight
7(6)
C.H. Chien
Z.P. Chen
A Review on Machining of Micro-Structured Optical Molds
13(6)
O. Riemer
Novel Approach to Fabrication of 3D Micro-Structures by Laser Machining
19(6)
H.T. Young
F.F. Lin
S.B. Hong
Numerical Control Interpolation Algorithm of Aspheric Surface Based on the Genetic Algorithms and Neural Network
25(5)
F.H. Zhang
D.J. Chen
L.J. Li
Production of Micro-Optical Lenses Using Micro-Jet Drop-On-Demand
30(5)
M. Nagao
H. Okabe
K. Oyoshi
S. Sakano
Research on Mathematical Models of New Diamond Turning for Non-Axisymmetric Aspheric Mirrors
35(4)
C.S. Han
L.J. Zhang
S. Dong
Single-Point Diamond Turning of Aspheric Mirror with Inner Reflecting Surfaces
39(4)
K.S. Chon
Y. Namba
K.H. Yoon
Study on Manufacturing Process Optimizing of Lightguiding Plate for Soft Computing
43(5)
Y. Lin
Study on Micro Fabrication of Mold Insert for Microlens Arrays by Micro Dispensing
48(5)
Y.K. Shen
Y. Lin
D.Y. Sheu
M.D. Ger
Y.H. Hu
R.H. Hong
S.M. Wang
Study on Micro-Feature of Backlight Module for Micro Injection Molding Technology
53(5)
Y.K. Shen
Y. Lin
J.L. Lee
F.H. Liu
C.W. Wu
K.L. Ou
W.Y. Wu
Y.C. Tu
Development of a Dynamic Model for Ultra-Precision Raster Milling
58(6)
L.B. Kong
C.F. Cheung
S. To
W.B. Lee
Toward the Accurate Coverage of Aspheric Surfaces Using Two-Dimensional Scanning Paths for Minimizing Regular Errors
64(5)
H.B. Cheng
Z.J. Feng
Y.T. Wang
J. Bian
Ultraprecision Ductile-Regime Cutting of Optical Glass
69(5)
M. Zhou
Y.C. Liang
S.N. Huang
A Non-Contact Displacement Sensor with Diffraction Grating Metrology System for Profile Measurement
74(6)
Y.R. Chen
X.D. Yang
T.B. Xie
Absolute Measurement of Aspheric Surfaces Using White-Light Interferometry
80(6)
S.P. Chang
T.B. Xie
X.Z. Wang
J. Guo
An Enhanced Common Path Interference Measurement Method for Optical Refractive Indices
86(6)
C.C. Wang
M.J. Jang
Y.H. Peng
An Optical System for the Ball Grid Array Inspection and Measurement Using the Back-Propagation Neural Network Technology
92(6)
S.F. Chen
Analytical Calculation of the Light Extraction Efficiency of Micro Cavities Light-Emitting Diodes
98(6)
P.C.P. Chao
L.D. Liao
Y.H. Fan
C.Y. Shen
Y.Y. Kao
J.S. Huang
Automatic Optical Inspection and Laser Cleaning of Image Sensors
104(4)
J.M. Lee
U.C. Cho
Evaluating Frequency Error Property of Wavefront of Large Optics by PSD Collapse
108(5)
X.F. Cheng
W.G. Zheng
X.D. Jiang
H. Ren
J. Yuan
X.D. Yuan
L. Zhang
X. Xu
High Accuracy Confocal Full-Field 3-D Surface Profilometry for Micro Lenses Using a Digital Fringe Projection Strategy
113(4)
L.C. Chen
Y.W. Chang
Aspheric Mirror Testing with Phase Retrieval Method
117(6)
X.J. Hu
Z.W. Zheng
Y.F. Dai
S.Y. Li
An Investigation of Form Errors Predicted Model for Injection Moulded Aspheric VCD Lens
123(5)
S. To
B.Y. Jiang
C. Weng
W.B. Lee
Design of a Highly-Efficient Light Guide Plate for the Edge Lighting Backlight Module
128(4)
P.C.P. Chao
L.D. Liao
C.W. Chiu
C.Y. Shen
Enhancement of the Optical Performances for the LED Backlight Systems with a Novel Dual Lens-Cap
132(6)
P.C.P. Chao
L.D. Liao
C.W. Chiu
C.Y. Shen
Free-Form Reflector Design Using Differential Evolution Algorithm
138(5)
B. Yang
G.F. Jin
Y.T. Wang
Microlens Array Homogenizer for Laser Illuminated Projector
143(5)
C.H. Chen
C.C. Chen
P.H. Yao
Package for Side Emitting LED
148(4)
Y.N. Pao
P.H. Yao
Y.T. Sun
C.H. Tien
Side-Emitting LED Lens Design for Generating Planar Lighting Source
152(4)
Y.T. Sun
Y.N. Pao
T.H. Lin
The Design of an Integrated Pick-Up Head for High-Density Digital Versatile Disk, Digital Versatile Disk and Compact Disk
156(4)
W.S. Sun
C.C. Sun
The Driver Circuit and Focusing Lens Designed for the Laser Range-Finder
160(6)
M.F. Chen
I.F. Li
C.W. Hu
The Optimization of Directly-Under-Light Type Backlight Module Structure for Brightness Uniformity
166(6)
C.F. Chen
L.M. Lu
Waveguide Structure Design of Adiabatic Optical Directional Couplers Weighted by Sin-Square Function
172(6)
C.F. Chen
Y.S. Ku
K.H. Chen
A Study on Glass Molding Press and Pitch Error Analysis of a V-Grooved Quartz Fiber Array Block
178(4)
U.C. Cho
Analysis on Anti-Vibration Characteristic of Synchronism Phase-Shifting
182(6)
Y.M. Wang
X.J. Liu
Nanoindentation Size Effect of KDP Crystal by Instrumented Indentation Testing
188(5)
H.X. Wang
J.H. Wang
S. Dong
Polarization Variation of Laser Beam Intervening Multiple Reflections within a Paraboloid of Revolution-Shaped Cavity
193(6)
C.Y. Ho
M.Y. Wen
J.C. Tsai
Profiles Detection in Ring Convex Forming by ACLN with Sub-Pixel Accuracy
199(6)
J.P. Wang
G.M. Huang
S.H. Yurs
Residual Strain Measurement of Femtosecond Laser Microexploded Glass by Nanoindentation
205(5)
S. Dong
Y.S. Wang
Y.Q. Yang
Y.C. Liang
T. Sun
Y.H. Wang
Z.R. Zheng
The Application of Motif Characterizing Method in the Surface Topography Evaluation of MEMS Device
210(5)
S.H. Wang
T.B. Xie
X.D. Yang
Uniformity Analysis of the Passive Film for SS316 Stainless Steel
215(6)
S.J. Lee
J.J. Lai
Y.M. Lee
M.D. Ger
S.W. Cheng
A Fuzzy Algorithm for Auto-Focusing Laser Diode Products
221(5)
K.C. Lee
Optical Surface Finish of PCD Composites by Dynamic Friction Polishing
226(6)
Y.Q. Chen
L.C. Zhang
J.A. Arsecularatne
A Study of the Microstructure and Properties of Electro formed Ni-P Model Insert
232(5)
S.T. Ke
J.L. Lee
Y.M. Yeh
S.J. Lee
M.D. Ger
An Investigation of Surface Grinding Characteristics for Titanium Alloy with CBN Wheel
237(6)
S.Y. Lin
Y.C. Liu
C.W. Huang
Kinematics Calibration of Parallel Kinematic Machine Using a Developed Double-Ball Bar Gauge
243(6)
X.J. Yang
B. Li
D.L. Zhang
Development of a Millimeter Scale Turning Centre for Gear Hobbing
249(5)
S. Chan
S. Wong
T.C. Kong
R. Du
Diffractive Line Beam Shaper
254(5)
C.H. Chen
P.C. Chen
C.J. Hsu
C.J. Ting
Calibration of a Photogrammetric System for Semiautomatic Measurement: CaM-DisT®
259(6)
P. Arias
H. Lorenzo
C. Ordonez
J. Armesto
Dynamic Characteristics in Cutting Processses for Precision Machining
265(7)
S.Y. Lin
Y.C. Fang
Barrel Chamber Polishing, Using Electrochemical Theories
272(8)
R.A. Mahdavinejad
Fabrication of High Aspect Ratio Periodical Structure on Metal Using an Electroforming Process
280(4)
W.C. Chuang
C.K. Chao
W.C. Chang
C.T. Ho
Fractal and Wavelet Methods Used in the Feature Extraction of Machining Processing from 3D Machined KDP Surfaces
284(6)
M.J. Chen
Q.L. Pang
J.H. Wang
K. Cheng
Improving Machining Accuracy of the EMM Process through Multi-Physics Analysis
290(7)
S.J. Lee
J.J. Lai
Y.M. Lee
C.Y. Lee
K.T. Yang
C.W. Peng
Effects of the Tool Angles on the Machined Surface Quality of KDP Crystal in Diamond Turning
297(5)
J.H. Wang
M.J. Chen
S. Dong
S.Q. Wang
Surface Finishing of SKD 11 Tool Steel via Plasma-Based Electron Beam Irradiation
302(6)
Y. Daichi
S. Sano
Y. Uno
A. Okada
The Analysis on Penetrating Efficiency in High-Energy Beam Drilling
308(7)
J.E. Ho
H.T. Young
Laser Patterning Indium Tin Oxide Thin Films on Glass Substrate
315(6)
M.F. Chen
Y.P. Chen
W.T. Hsiao
Z.P. Gu
Precision Machining of Silicon Carbide with Diamond Micro Tool Array (DMTA)
321(6)
Q.L. Zhao
G. Yu
T. Sun
S. Dong
Stiffness Analysis for a Novel Parallel-Robot Based High-Precision Flexible Assembly Fixture
327(6)
H.J. Yu
B. Li
X.J. Yang
Y. Hu
H. Hu
Studies on Ni-Mo-P Coatings by Electroless Deposition
333(7)
Y.H. Chou
C.Y. Bai
M.D. Ger
S.J. Lee
C.Y. Lee
C.L. Chao
The Design of an Atmospheric Pressure Plasma Torch Used for Polishing Ultra-Smooth Surfaces
340(6)
J.F. Zhang
B. Wang
S. Dong
The Influence of Surfactant CTAB on the Microstructure and Material Properties of Nickel Microelectroforming
346(5)
Y.C. Chen
S.L. Kuo
J.L. Lee
S.T. Ke
C.H. Wong
M.D. Ger
The Current State and Development Trends of Deterministic Ultraprecision Optical Surfaces Machining Technology
351(7)
S.B. Luo
H. Yang
J.M. Zhang
C.T. Pang
The Wear Behavior of Pulse Current Electroforming Ni-P-SiC Composite Coatings
358(6)
K.H. Hou
M.C. Jeng
Y.K. Shen
M.D. Ger
A Scanning White-Light Interferometric Profilometer for Smooth and Rough Surface
364(7)
R. Dai
T.B. Xie
S.P. Chang
A Contact Stylus Profilometer Based on Linnik Interference Microscope
371(6)
J.P. Yun
L.L. Zhang
T.B. Xie
G.Y. Hu
A Novel Time Based Current Compensator for LED Back Light Modules
377(6)
Y.H. Fan
C.J. Wu
C.C. Fan
K.W. Chih
L.D. Liao
A Rapid Prototyping Apparatus for Forming Ceramic Parts
383(6)
F.H. Liu
Y.S. Liao
Design of the Servo System for the Micro Milling Machine
389(5)
B. Wang
J.X. Wang
Y.C. Liang
3D Micro-Scale Profile Measuring System
394(6)
H.T. Young
W.Y. Lin
Automatic Optical Inspection on TFT-LCD Mura Defects Using Background Image Reconstruction
400(4)
L.C. Chen
C.C. Kuo
P.A. Yen
Stress Birefringence in Photonic Crystal Fibers Used in a Novel Field Installable LC Type Optical Connector
404(4)
S.I.E. Lin
Structural Design of a Bench-Type Ultra-Precision Machine Tool for Micro-Structured Optical Components
408(5)
Y.H. Yang
S.J. Chen
X.Z. Sun
K. Cheng
Subaperture Stitching Interferometry: Problems, Algorithms and Experimental Verification
413(6)
S.Y. Li
S.Y. Chen
Z.W. Zheng
Y.F. Dai
The Integrated Packaging Process for Optical Sensor and RFID Used in Harsh Environment Conditions
419(6)
C.W. Wu
Y.K. Shen
C.U. Lee
C.S. Wei
C.C. Hsiao
The Study of Fabrication of the Liquid Core Waveguide Nutrient Sensor
425(6)
C.W. Wu
Y.K. Shen
Y.L. Lee
C.S. Wei
C.C. Hsiao
A Novel Nanofluid Synthesis System for Preparation of Nanofluid
431(6)
H. Chang
S.C. Lin
Block Copolymer Films Hierarchical Assembly in Confinement
437(5)
Y.Z. Cao
S. Dong
Y.C. Liang
T. Sun
Y.D. Yan
Fractal Contact Model between Rough Surfaces in Considering Elastoplastic Deformation and Adhesion Force
442(7)
J.H. Horng
J.S. Lee
M.Y. Ku
C.H. Chen
Microfluidic Parallel Form Mixer Utilizing Chaotic Electric Field
449(5)
H.T. Yau
C.L. Chen
C.C. Cho
Synthesis of ZnO Nanoparticles by a Novel Gas Condensation System
454(6)
H. Chang
C.S. Jwo
T.T. Tsung
P.S. Fan
Y.C. Wu
M.H. Tsai
Review of Etchants for Copper and its Alloys in Wet Etching Processes
460(6)
O. Cakir
Research and Simulation on the Wear Uniformity of Lapping Plate
466(4)
J.L. Yuan
W.T. Liu
Z.W. Wang
D.H. Wen
Z.Z. Zhou
Analysis of Correcting Ability of Ion Beam Figuring
470(6)
L. Zhou
Y.F. Dai
X.H. Xie
C.J. Jiao
S.Y. Li
An Experimental Study on Flow Characteristics of PBK-40 for Glass Molding Press Simulation
476(6)
S.H. Chang
Y.M. Heo
G.H. Shin
Y.M. Lee
J.J. Kang
T.S. Jung
Experimental Study of Microelectrode Array and Micro-Hole Array Fabricated by Ultrasonic Enhanced Micro-EDM
482(6)
W.L. Zeng
Y.P. Gong
Y. Liu
Z.L. Wang
ASPHERO5 -- Simulation and Analysis of Aspherical Polishing Process
488(5)
R. Boerret
A. Kelm
H. Thiess
V. Giggel
Microstructure Optics Designed for LED Traffic Signal Lighting
493(6)
L.M. Fok
M.H. Pun
D. Louie
L.M. Li
Solution for Best Fitting Spherical Curvature Radius and Asphericity of Off-Axis Aspherics of Optical Aspheric Surface Component
499(5)
G.J. Dong
C.S. Han
S. Dong
Optical Modeling and Analysis of Laser Centering Tester
504(6)
T.T. Liao
P.D. Lin
Determining the Thickness and Refractive Index of a Birefringence by Using an Improved Accurate Measurement System
510(6)
Y.L. Yeh
C.C. Wang
M.J. Jang
Y.P. Lin
K.S. Chen
Analysis on the Performance of Differential Confocal Pointing Signal
516(5)
J.H. Zhang
X.M. Gao
Method of Analyzing the Singlet F-Theta Scan Lens for Laser Drilling System
521(6)
M.F. Chen
Y.P. Chen
C.W. Hu
C.C. Chen
Advanced Smart High Ratio Zoom System with Global Optimization
527(6)
Q.X. Ding
H. Liu
Analysis and Optical Design of 1:1 Projection Lithography System
533(6)
Q.H. Lin
J.Y. Zhou
W.J. Li
Application of Dynamic Optical Theory in Zoom System
539(5)
Y. Hu
Y.G. Fu
Z.Y. Liu
T.Y. Gao
L. Zhang
Z.J. Wang
An Experimental Study of the Formation of Tool Marks Made by Facet Diamond Cutting Tools in Single-Point Diamond Turning
544(6)
M.C. Kong
W.B. Lee
C.F. Cheung
S. To
Optical System Design with High Resolution and Large Field of View for the Remote Sensor
550(5)
J. Chang
Z.C. Weng
Y.T. Wang
D.W. Cheng
H.L. Jiang
Recognition of MEMS Microstructure Feature Based on Pattern Analysis and Classification
555(5)
K. Hu
X.Q. Jiang
X.J. Liu
An Improved Data Processing Method in Differential White Light Spectral Interferometry for the Measurement of Thickness of Ultra-Thin Metallic Foil
560(6)
Y.L. Du
H.M. Yan
X.D. Zhang
A Study on the Characteristics of Micro Deep Hole Machining Processes
566(6)
T.I. Seo
D.W. Kim
M.W. Cho
E.S. Lee
Novel Error Separation Method for Straightness Measurement
572(6)
Z.Q. Yin
S. To
L.B. Kong
ELID Assisted Precision Conditioning of Coarse-Grained Diamond Grinding Wheel
578(6)
Q.L. Zhao
E. Brinksmeier
O. Riemer
K. Rickens
Study on Anastomosis Feature in Polishing Zone in Aspheric Optics Machining
584(6)
G.L. Wang
Y.F. Dai
S.Y. Li
A Predictive Model Construction for the Sheared Planes in Sheet Metal Shearing Process
590(5)
Y.C. Hsu
T.S. Yang
A Kinematic Study on a Novel Press System
595(6)
W.H. Hsieh
Single-Point Diamond Turning of Plasma-Nitrided Stainless Steel
601(6)
C.L. Chao
C.C. Chen
C.J. Chang
H.S. Dong
K.J. Ma
W.Y. Hsu
K.C. Huang
C.W. Chao
Fabrication of Large-Area Imprint Mold with High-Aspect-Ratio Nanotip Arrays of Sub-Micron Diameter
607(6)
C.J. Ting
H.Y. Tsai
C.P. Chou
Feasibility Study on UV YAG Laser Patterning on Diamond Film
613(5)
H.Y. Tsai
C.J. Ting
K.L. Kuo
C.P. Chou
Effects of Surface Cleanness, Bonding Pressure and Contact Area of ACF on Interfacial Impedance of Chip on Glass Bonding in Flat Panel Display Assembly
618(6)
J.C. Tsai
W.T. Wang
A Study of Glass Milling Using Rotary Ultrasonic Machining
624(5)
K.L. Kuo
Study of Mold Design on SD Card with 3D Mold-Flow Analysis
629(5)
S.M. Huang
R.Y. Jou
J.C. Lin
K.S. Lee
A Study of Process Parameter Optimization for Passive Component Precision Extrusion
634(6)
W.S. Lin
K.S. Lee
S.M. Huang
R.Y. Jou
J.C. Lin
The Study of Precision Hard Turning of the Hardened Mold Steel
640(4)
W.S. Lin
Modeling the Surface Roughness for Fine Turning of AISI304 Stainless Steel
644(5)
W.S. Lin
The Optimal Process Analysis for Precision-Drilling of Mold Steel SKD61
649(6)
W.Y. Lin
B.Y. Lee
PART 2
Design of Protective Coatings for Glass Lens Molding
655(7)
K.J. Ma
H.H. Chien
W.H. Chuan
C.L. Chao
K.C. Hwang
A Study on Tool Deflection Trend Using Real Captured Images in Micro Endmilling Process
662(6)
G.H. Kim
G.S. Yoon
Y.M. Heo
S.H. Jang
T.I. Seo
M.W. Cho
Research on Quick Polishing of CVD Diamond Film
668(6)
C.L. Chao
W.H. Fan
W.C. Chou
C.Y. Chien
H.Y. Lin
J.G. Duduch
Design of Sword-Form Electrode and Ultrasonic-Aid in Electrochemical Finishing of AISI 4340 Surface
674(6)
P.S. Pa
Performance Assessment of Design Electrode in Ultrasonic-Aided of Freeform Surface Finishing
680(6)
P.S. Pa
A Method to Improve Uniformity of Material Removal of Chemical Mechanical Polishing in LCOS Process
686(4)
Y.H. Sun
R.K. Kang
D.M. Guo
Current Situation and Trend of Ultra-Precision Abrasive Machining
690(6)
J.L. Yuan
D.X. Hu
Z.W. Wang
D.H. Wen
Study on Effects of Grinding Speed on Finish and Precision Machining in Quick-Point Grinding
696(5)
S.C. Xiu
S.X. Yuan
C.H. Li
G.Q. Cai
Diamond Machining of Steel Molds for Optical Applications
701(6)
E. Brinksmeier
R. Glabe
Research on Kinematic Analysis and Post Processing Arithmetic for NC Machine Tool for Bonnet Tool Polishing
707(6)
Y.X. Yao
S.Z. Yu
D.G. Xie
Prediction of Surface Roughness in High Speed Milling Process Using the Artificial Neural Networks
713(6)
D.W. Kim
Y.J. Shin
K.T. Park
E.S. Lee
J.H. Lee
M.W. Cho
Fabrication of Phase Mask for Optical Fiber Grating
719(5)
Q. Liu
J.H. Wu
L.L. Fang
C.M. Li
Optimization of Free-Form Illumination Optics
724(4)
K. Kataja
M. Aikio
K. Niemela
M. Aikio
Experiment Research on Temperature Field in Ultrasonic Assisted Grinding Engineering Ceramics
728(5)
G.F. Gao
C.S. Liu
B. Zhao
F. Jiao
Q.H. Kong
Parameters Optimization of the Ultrasonic External Cylindrical Lapping Process for Nano ZTA Engineering Ceramics Using Response Surface Methodology
733(6)
F. Jiao
B. Zhao
C.S. Liu
X.S. Zhu
Theoretical Analysis and Experimental Verification of Triangular Fracture Defects of MgO Single Crystal Substrate in Lapping or Polishing Process
739(6)
K. Wang
R.K. Kang
Z.J. Jin
D.M. Guo
Development of a New Optical Coordinate Measurement Machine in Cylinder Coordinates
745(5)
Z.W. Zheng
L.D. Jia
S.Y. Li
Y.F. Dai
A Large Measuring Range Profilometer for Three-Dimensional Surface Topography Measurement
750(6)
X.D. Yang
J.C. Li
T.B. Xie
Design of Ion Beam Figuring Machine for Optical Mirrors
756(6)
C.J. Jiao
X.H. Xie
S.Y. Li
L. Zhou
Y.F. Dai
MgF2 Film Deposited by IAD with End-Hall Ion Source Using SF6 as Working Gas
762(6)
J.C. Hsu
P.W. Wang
H.L. Chen
Stage Equipped with Single Actuator for Nano-Positioning in Large Travel Range
768(5)
Y.C. Wang
C.J. Lin
C.J. Chen
H.C. Liou
Effect of the Adhesive Mass at the Cantilever Beam Tip Position
773(6)
Y.L. Yeh
C.C. Wang
M.J. Jang
K.S. Chen
Y.P. Lin
Study on CAN-Based Lighting and Identifying System for Automobiles
779(4)
F.L. Chen
X.Y. Fan
G.C. Ma
Fast Computing Model for Thermal Field of Auto Lamp
783(6)
H. Liu
J.G. Li
Y.T. Wang
Iterative Model for Simulating Light Intensity Variation of LED
789(6)
H. Liu
Y.N. Shen
Q. Chen
Regular Dot Pattern of Light Guide Used in Liquid Crystal Display Backlight
795(5)
X. Meng
X.T. Li
Z.F. Chen
S.T. Deng
Ultra-Thin Design of Large Backlight Module Used in Illuminating Advertising Pictures
800(5)
S.T. Deng
X.T. Li
Z.F. Cen
X. Meng
The Investigation of Dynamic Drift Angle Measuring System of Turning Platform Based on Laser-Linear CCD Technology
805(5)
L. Zhang
Y. Yu
C.Z. Liu
Curvature Spectrum Correction in High Spectral Resolution Minitype Spectrometer
810(6)
L.Q. Sun
H.Y. Qiu
Z.Y. Huang
E.Y. Zhang
Q. Tian
Monitoring of Temperature Distribution within a Silicon-Based Micro Reformer Using Array Micro Sensors
816(6)
C.Y. Lee
S.J. Lee
C.L. Dai
C.H. Wu
G.W. Wu
Study on Accuracy Test Methods for Sun Sensors
822(5)
F.F. Chen
J. Feng
M.H. Wang
Pulsed LED Illumination for High Speed Imaging
827(5)
M. Aikio
H. Lindstrom
E. Juntunen
K. Kataja
H. Keranen
Manufacturing of Mold Insert with Micro Fluidic Channel Using Micro Cutting Process
832(5)
W.C. Jung
Y.M. Heo
G.S. Yoon
K.H. Shin
M.W. Cho
T.I. Seo
Study of Etch Rate and Surface Roughness in Chemical Etching of Stainless Steel
837(6)
O. Cakir
Integration of Micro Temperature Sensor and Heater in a Stainless Steel-Based Micro Reformer
843(6)
C.Y. Lee
S.J. Lee
C.L. Dai
C.H. Wu
M.D. Ger
Application of Porous Silicon on the Gas Diffusion Layer of Micro Fuel Cells
849(6)
C.Y. Lee
S.J. Lee
C.L. Dai
C.W. Chuang
Integration of Micro Array Sensors in the MEA on Diagnosis of Micro Fuel Cells
855(6)
C.Y. Lee
S.J. Lee
G.W. Wu
Metal Bipolar Plate with Micro Sensors
861(6)
C.Y. Lee
S.J. Lee
C.L. Dai
C.L. Hsieh
Y.M. Lee
Research of Vacuum Pump with Nano-Lubricant
867(6)
C.S. Jwo
L.Y. Jeng
H. Chang
S.L. Chen
Solid Deformable Multibody Dynamic Problems in Precision Manufacturing Systems
873(6)
Y.L. Hwang
Thermal Transpiration of Liquid in Nanoscale Channel: A Molecular Dynamics Simulation Study
879(6)
M.S. Han
The Electrochemical Micro-Fabrication Method for Micro-Scale Flow Channels
885(6)
S.J. Lee
Y.M. Lee
C.Y. Lee
J.J. Lai
K.T. Yang
F.H. Kuan
Improving Machining Accuracy of the EMM Process through Multi-Physics Analysis
891(6)
S.J. Lee
J.J. Lai
Y.M. Lee
C.Y. Lee
K.T. Yang
C.W. Peng
Characteristics of Micro-Precision Machining of Glasses by Powder Blasting
897(6)
W.S. Yoo
Q.Q. Jin
D.S. Park
E.J. Seong
J.Y. Han
Study on the Influence Factors of Electrochemical Micromachining
903(6)
Z.L. Wang
B.G. Zhu
W.L. Zeng
L.Z. Sun
Research on Surface Microstructures of Nanocomposite Ceramics in Two-Dimensional Ultrasonic Ultraprecision Grinding
909(5)
B. Zhao
J.L. Tong
Y. Wu
G.F. Gao
Research on Material Removal of a New Micro Machining Technology Based on the Magnetorheological Effect of Abrasive Slurry
914(6)
J. Yu
Q.S. Yan
J.B. Lu
W.Q. Gao
Method of Examining Surface Cracks on Monocrystalline Silicon
920(5)
F.Z. Fang
Y.C. Liu
Q.X. Pei
X.T. Hu
Nano Molding Technology for Optical Storage Media with Large-Area Nano-Pattern
925(6)
H.G. Shin
H.Y. Kim
B.H. Kim
Heat Transfer Investigations of a Nano-Porous Silicon Film Deposited on a Flexible Cyclic Olefin Copolymers Substrate
931(6)
R.Y. Jou
Photocatalytic and UV Characterization of TiO2 Nanofluid Prepared by SANSS on HVAC
937(5)
C.S. Jwo
C.C. Chen
H. Chang
S.L. Chen
S.J. Ho
Effects of Light Wavelengths on the Performance of Color Absolute Judgments
942(7)
S.M. Huang
J.C. Lin
Investigation on Elliptic-Shaped Flaring Process of Metal Tube with Finite Element Method
949(6)
C.T. Kwan
Diffraction Effect in Proximity Printing of Circular Aperture Array
955(6)
J.C. Tsai
M.Y. Hsieh
H.H. Yang
Frequency Spectrum Features of Material Removal Function in Optical Manufacturing
961(6)
H.B. Cheng
Z.J. Feng
S. To
Y.T. Wang
Study of Ultrasonic Field in Polishing Based on Coupling Vibrations of Liquid
967(6)
X.Z. Huang
Z.N. Guo
Z.G. Huang
Q.H. Li
Z.Q. Yu
T.M. Yue
W.B. Lee
Influence of Process Parameters on T-Shape Tube HydroForming Characteristics for Magnesium Alloy
973(7)
S.Y. Lin
C.M. Chang
C.K. Chang
A Finite Element Analysis for the Initial Blank's Shape Design of Sheet Metal in Deep Drawing Process
980(6)
T.S. Yang
Y.C. Hsu
H.S. Lin
S.Y. Chang
An Empirical Approach for Identification of Sources of Machining Errors in Ultra-Precision Raster Milling
986(6)
S. To
H. Wang
B. Li
C.F. Cheung
Investigation on Steady-State Wire Drawing for Strain-Rate Sensitivity Materials
992(6)
H.R. Shih
C.T. Kwan
Stress Analysis of Optical Fiber Sensor Embedded Composite Subjected to Tri-Axial Normal Loadings
998(5)
S.C. Her
B.R. Yao
A Quasi-Steady-State Thermal Model for Laser-Assisted Cutting of Zirconia Ceramics
1003(6)
C.Y. Ho
M.Y. Wen
S.Y. Lin
Investigation of the Chip Types in High Speed Machining of SKD11 Steel
1009(6)
S.Y. Lin
S.H. Cheng
The Study of High Speed Turning of the Hardened Mold Steel SKD11 by Ceramic Cutting Tools
1015(6)
W.S. Lin
The Influence of Light-Cured Repairing on the Stiffness of Composite Material
1021(5)
X.L. Yu
Z.M. Zhao
H.M. Yu
Effect of Different Coating Materials on Cutting Performance in High-Speed Machining of Mold Steels
1026(6)
S.Y. Lin
S.H. Yu
M.L. Wu
Chemical Detoxification of AflatoxinB1 in Rice by Several Solutions through Fluorescence Spectral Experiment
1032(5)
W.L. Chen
Q. Zhou
D. Xing
Dynamic Design for a Novel Parallel Kinematic Machine with Passive Linkage
1037(6)
Y. Hu
B. Li
D.Z. Su
H. Hu
Rearrangeable Nonblocking 8x8 Matrix Optical Switches Based on Extended Banyan Network
1043(5)
Y. Zha
D.G. Sun
T.G. Liu
Y. Zhang
X.Q. Li
J.F. Jiang
Measurement of Progressive Addition Lenses
1048(6)
Q. Wang
J.C. Yu
H. Chen
The Process of Interior Progressive Addition Lens
1054(7)
L.L. Qin
J.C. Yu
H. Chen
Light Guide Plate Based on Sub-Micron Gratings
1061(5)
Y. Ye
L.S. Chen
Novel Algorithm for Computer-Aided Alignment of Wide Field of View Complex Optical System
1066(6)
X.F. Yang
C.Y. Han
High Brightness White Organic Light Emitting Devices Employing Phosphorescent Iridium Complex as RGB Dopants
1072(5)
R.L. Song
Y. Duan
A Novel Living-Cell Imaging System Design with Ultra-Long Working Distance and High Numerical Aperture
1077(6)
G.L. Huang
Z.H. Dong
C. Deng
S.K. Xu
J. Zhu
X.Y. Yang
G.F. Jin
Comparative Study of MRI and Photoacoustic Imaging on Brain Blood Perfusion Function of Rat/Mouse
1083(6)
Q. Zhou
S.H. Yang
W.L. Chen
Y. Dong
L. Huang
Microscopic Three-Dimensional Imaging Theory Based on RIKES
1089(6)
L.N. Guo
Z.L. Tang
D. Xing
Highly Efficient and Unusual Structure White Organic Light-Emitting Devices Based on Phosphorescence Sensitized 5,6,11,12-Tetraphenylnaphthacene
1095(5)
W.L. Jiang
Y. Duan
H.Y. Li
D.C. Li
G.Y. Ding
Photoacoustic Imaging Application in Tumor Diagnosis and Treatment Monitoring
1100(5)
L.Z. Xiang
F.F. Zhou
Scanning Photoacoustic Tomography of Biological Tissues with a Piezoelectricity Double-Ring Sensor
1105(6)
H. Wang
L.Z. Xiang
Key Issues in Measuring the Velocities of Nanoparticles in Nanofluids
1111(6)
M. Qian
X.W. Ni
J. Lu
Z.H. Shen
Experimental Study on the Detection of Surface-Breaking Defects on Metal with the Scanning Laser Line Source Technique
1117(6)
G. Yan
C.Y. Ni
Y.F. Shi
Z.H. Shen
J. Lu
X.W. Ni
Monitoring of Blood Flow by Drug Stimulation on Mouse Brain Using Non-Invasive Photoacoustic Imaging Technology
1123(5)
S.H. Yang
Y.Q. Lao
Study of Stray Light and Cross-Talk of the Capillary Array Electrophoresis
1128(5)
J. Wang
L.Q. Wang
Y. Shi
H. Zheng
Z.K. Lu
Fabrication of Micro-Grating Structure on Glazed Stainless-Steel by Two-Beam Holographic Method Using Nanosecond Laser Pulses
1133(5)
H. Zhang
Y. Zhou
L.S. Chen
Modulation Transfer Function for a Multichannel Laser Induced Fluorescence Analyzer and its Numerical Calculation
1138(4)
Y. Shi
L.Q. Wang
H. Zheng
J. Wang
Z.K. Lu
Correlation Study between a New Interferometric Asphere Metrology System and Fizeau Interferometer
1142(5)
M.F. Kuechel
D.M. Sykora
Novel Design of Confocal Fluorescence Detecting System for Capillary Array and Microchip DNA Fragment Analysis
1147(4)
H. Zheng
L.Q. Wang
Y. Shi
J. Wang
Z.K. Lu
Thermal-Hygro-Mechanical Design for CMOS Image Sensor
1151(6)
H.C. Hsu
H.Y. Lee
Y.C. Hsu
Fast Photoacoustic System Based on an Acoustic Lens and the Peak Detection Technology
1157(5)
H.C. Zhang
Z.L. Tang
Y.H. He
L.N. Guo
Machinability in Precision Grinding of Aspheric Optical Lens with Diamond Wheel
1162(6)
S.Y. Baek
J.H. Lee
E.S. Lee
J.T. Lee
A Study on the Grinding to Improve Profile Accuracy of Aspheric Lens
1168(6)
S.Y. Baek
E.S. Lee
J.K. Won
The Roughness Measurement and Assessment of the Super-Smooth Surface of Hard Disks
1174(6)
S.M. Yang
X.Q. Jiang
Propagation Properties of Partially Polarized Gaussian Schell-Model Beams through an Aperture Lens with Spherical Aberration
1180(7)
L.Z. Pan
C.L. Ding
J.H. Yang
X. Yuan
Research on Coupling Technique of Q-Switched Laser with Fiber
1187(4)
G.C. Song
W. Quan
Y.S. Cai
H.Q. Wu
Inspection Technology for F-Theta Lens: Practices and Discussions
1191(6)
H. Li
S. To
L.B. Kong
C.F. Cheung
W.B. Lee
FE Analysis and Position Accuracy Estimation of Machining System for Lens of Mobile Devices
1197(6)
S.Y. Baek
E.S. Lee
J.H. Lee
M.J. Shin
Micromachining of an In-Fiber Extrinsic Fabry-Perot Interferometric (MEFPI) Sensor by Using a Femtosecond Laser
1203(4)
Y.J. Rao
M. Deng
T. Zhu
Q.T. Tang
G.H. Cheng
Aberrations of the Human Eye across the Horizontal Visual Field
1207(4)
W. Quan
G.C. Song
F.Y. Liu
Z.Q. Wang
A Study of Two-Stage Micro Injection Compression Molding Process for Diffractive Optical Lens
1211(4)
C.C.A. Chen
S.C. Kao
Design of Geometric Error Measuring System on a Miniaturized Machine Tool with Optics
1215(6)
W. Wang
S.H. Kweon
Y.S. Kim
S.H. Yang
Experimental Survey of Photon in the Light Quanta (hv) and Study of Interaction Mechanism of Moving Photons and Moving Electrons outside Atomic Nucleus
1221(10)
J.S. Feng
Optical Design of Very Large Four-Mirror Systems
1231(6)
L.R. Zhu
W.M. Shen
A HDRI Camera Based on SLM
1237(5)
Z.B. Chen
J. Xu
B. Lin
X.X. Ni
Z.K. Lu
An Issue and its Processing in PIS Testing
1242(4)
J. Xu
Y. Li
Z.B. Chen
X.X. Ni
Z.K. Lu
The Application of Surface Fairing Technique in Progressive Lens Processing
1246(5)
J.J. Du
S. To
C.F. Cheung
W.B. Lee
X.W. Miao
Intelligent Vision Based Technique Using ANN for Surface Finish Assessment of Machined Components
1251(6)
M.R. Narayanan
S. Gowri
General Study on the Dimming Control of the LED Lighting Device
1257(5)
Y.K. Cheng
K.W.E. Cheng
Z.H. Shi
A Study of the Scallop Generation Mechanism in Ultra-Precision Raster Milling
1262(6)
S.J. Wang
S. To
C.F. Cheung
W.B. Lee
Modeling and Tolerancing for Complex Aperture Imaging Systems
1268(6)
D.W. Cheng
Y.T. Wang
M.M. Talha
J. Chang
A Framework of a Surface Generation Model in Fast Tool Servo (FTS) Machining of Optical Microstructures
1274(6)
T.C. Kwok
C.F. Cheung
S. To
W.B. Lee
Investigation on the Modeling and Ageing Characteristics of the HID Car Headlight Automotive System
1280(5)
P. Dong
K.W.E. Cheng
D.H. Wang
B.P. Divakar
Grain Size Effect in Sheet Metal Microforming Simulation Adopting Strain Gradient Concept
1285(7)
W.B. Lee
Y.P. Chen
S. To
Target Tracking in Micro Injection Molding
1292(4)
K.L. Yung
H. Liu
Y. Xu
H. Hu
S.M. Ko
M. Kwan
K.S. Lau
K.F. Tam
Research of Surface Generation Mechanisms in Single-Point Diamond Turning
1296(6)
C.F. Cheung
W.B. Lee
S. To
L.B. Kong
Fabrication of Nanotemplate and Nanowires from Bulk Aluminum at Room Temperature
1302(5)
C.Y. Chan
B.K. Jin
K.L. Yung
Y. Xu
Author Index 1307(6)
Keyword Index 1313