Muutke küpsiste eelistusi

E-raamat: 24th European Symposium on Computer Aided Process Engineering: Part A and B

Volume editor (Head of Sustainable Process Integration Laboratory (SPIL)
NETME CENTRE, Faculty of Mechanical Engineering
BRNO UNIVERSITY OF TECHNOLOGY - VUT Brno
Czech Republic), Volume editor (University of Pannonia, Hu), Volume editor (University of Pannonia, Hungary)
Teised raamatud teemal:
  • Formaat - PDF+DRM
  • Hind: 477,75 €*
  • * hind on lõplik, st. muud allahindlused enam ei rakendu
  • Lisa ostukorvi
  • Lisa soovinimekirja
  • See e-raamat on mõeldud ainult isiklikuks kasutamiseks. E-raamatuid ei saa tagastada.
Teised raamatud teemal:

DRM piirangud

  • Kopeerimine (copy/paste):

    ei ole lubatud

  • Printimine:

    ei ole lubatud

  • Kasutamine:

    Digitaalõiguste kaitse (DRM)
    Kirjastus on väljastanud selle e-raamatu krüpteeritud kujul, mis tähendab, et selle lugemiseks peate installeerima spetsiaalse tarkvara. Samuti peate looma endale  Adobe ID Rohkem infot siin. E-raamatut saab lugeda 1 kasutaja ning alla laadida kuni 6'de seadmesse (kõik autoriseeritud sama Adobe ID-ga).

    Vajalik tarkvara
    Mobiilsetes seadmetes (telefon või tahvelarvuti) lugemiseks peate installeerima selle tasuta rakenduse: PocketBook Reader (iOS / Android)

    PC või Mac seadmes lugemiseks peate installima Adobe Digital Editionsi (Seeon tasuta rakendus spetsiaalselt e-raamatute lugemiseks. Seda ei tohi segamini ajada Adober Reader'iga, mis tõenäoliselt on juba teie arvutisse installeeritud )

    Seda e-raamatut ei saa lugeda Amazon Kindle's. 

The 24th European Symposium on Computer Aided Process Engineering creates an international forum where scientific and industrial contributions of computer-aided techniques are presented with applications in process modeling and simulation, process synthesis and design, operation, and process optimization.

The organizers have broadened the boundaries of Process Systems Engineering by inviting contributions at different scales of modeling and demonstrating vertical and horizontal integration. Contributions range from applications at the molecular level to the strategic level of the supply chain and sustainable development. They cover major classical themes, at the same time exploring a new range of applications that address the production of renewable forms of energy, environmental footprints and sustainable use of resources and water.

Muu info

The critical reviews published here define the new frontiers of process engineering and will stimulate the collaboration between academia and industry
Preface xxxi
International Scientific Committee xxxiii
Local Organising Committee xxxv
Synthesis and Design
Financial Risk Analysis in the Synthesis and Design of Processing Networks: Balancing Risk and Return
1(6)
Alberto Quaglia
Gurkan Sin
Rafiqul Gani
Dc Novo Molecular Design using a Graph-Based Genetic Algorithm Approach
7(6)
Robert H. Herring
Mario R. Eden
Assessment of Solvent Degradation within a Global Process Model of Post-Combustion CO2 Capture
13(6)
Gregoire Leonard
Dominique Toye
Georges Heyen
A Cyclin Distributed Cell Cycle Model in GS-NSO
19(6)
David G. Garcia Munzer
Margaritis Kostoglou
Michael C. Georgiadis
Efstratios N. Pistikopoulos
Athanasios Mantalaris
The Good, the Bad, and Your Real Choices -- Decision Support for Energy Systems Synthesis through Near-Optimal Solutions Analysis
25(6)
Philip Poll
Mark Jennings
Maike Hennen
Nilay Shah
Andre Bardow
Achieving More Sustainable Designs through a Process Synthesis-Intensification Framework
31(6)
Deenesh K. Babi
John M. Woodley
Rafiqul Gani
Superstructure Development and Optimization under Uncertainty for Design and Retrofit of Municipal Wastewater Treatment Plants
37(6)
Hande Bozkurt
Alberto Quaglia
Krist V. Gernaey
Gurkan Sin
Scale-up and Techno-economical Study for the Production of Polyesters from Glycerol
43(6)
Laura Bueno
Claudio A. Toro
Mariano Martin
Uncertainty Analysis in Raw Material and Utility Cost of Biorefinery Synthesis and Design
49(6)
Beam Cheali
Alberto Quaglia
Krist V. Gernaey
Gurkan Sin
Rigorous Optimization-based Synthesis of Distillation Cascades without Integer Variables
55(6)
Alexander W. Dowling
Lorenz T. Biegler
The Virtual Product-Process Design Laboratory for Structured Chemical Product Design And Analysis
61(6)
Michele Mattei
Nor A. Yunus
Sawitree Kalakul
Georgios M. Kontogeorgis
John M. Woodley
Krist V. Gernaey
Rafiqul Gani
Physically-based Thermodynamic Models in Integrated Process and Molecular Design
67(6)
Marina Stavrou
Matthias Lampe
Andre Bardow
Joachim Gross
Synthesis and Design of Interplant Water Networks using Direct Recycling Techniques within Industrial Cities
73(6)
Sabla Y. Alnouri
Patrick Linke
Mahmoud M. El-Halwagi
Reliability Integration to Process Synthesis applied to GTL Processes
79(6)
Herib Blanco
Johan Grievink
Nort Thijssen
Paulien Herder
Integrating Glycerol to Methanol vs. Glycerol to Ethanol within the Production of Biodiesel from Algae
85(6)
Mariano Martin
Ignacio Grossmann
Robust Superstructure Optimisation of a Bioreactor that Produces Red Blood Cells
91(6)
Ruth Misener
Jonathan Chin
Min Lai
Maria Fuentes Gari
Eirini Velliou
Nicki Panoskaltsis
Efstratios N. Pistikopoulos
Athanasios Mantalaris
New Intensified Distillation Systems for Quaternary Petlyuk Configuration
97(6)
Ben-Guang Rong
Massimiliano Errico
Juan Gabriel Segovia-Hernandez
A Numerical Modelling Approach for Dual Reflux PSA Separation of N2 and CH4 in LNG Production
103(6)
Yechun Zhang
Thomas L.H. Saleman
Eric F. May
Brent R. Young
Design of Multi-pressure Organic Rankine Cycles for Waste Heat Recovery in Site Utility Systems
109(6)
Mirko Z. Stijepovic
Athanasios I. Papadopoulos
Patrick Linke
Aleksandar S. Grujic
Panos Seferlis
MINLP Optimization Algorithm for the Synthesis of Heat and Work Exchange Networks
115(6)
Viviani C. Onishi
Mauro A. S. S. Ravagnani
Jose A. Caballero
Sustainable Development of the Shale Gas Supply Chain and the Optimal Drilling Strategy for Nonconventional Wells
121(1)
Diego C. Cafaro
Ignacio E. Grossmann
Design of Ionic Liquids by Principal Component Decision Trees
121(12)
Zelimir F. Kurtanjek
Model-Based Analysis for Acetone-Butanol-Ethanol Production Process through a Dynamic Simulation
133(6)
Ricardo Morales-Rodriguez
Divanery Rodriguez-Gomez
Mauricio Sales-Cruz
Jose A. de los Reyes-Heredia
Eduardo S. Perez Cisneros
Heat Exchanger Network Synthesis using MINLP Stage-wise Model with Pinch Analysis and Relaxation
139(6)
Natchanon Angsutom
Kitipat Siemanond
Rungroj Chuvaree
Study of Energy Efficient Distillation Columns Usage for Multicomponent Separations through Process Simulation and Statistical Methods
145(6)
Sandra S. Florindo
Isabel M. Joao
Joao M. Silva
Structure Generation of Candidate Reactants Using Signature Descriptors
151(6)
Vikrant A. Dev
Nishanth G. Chemmangattuvalappil
Mario R. Eden
Validation of a New Double-Column System for Heteroazeotropic Batch Distillation by Experiments and Dynamic Simulation
157(6)
Ferenc Denes
Xavier Joulia
Peter Lang
MINLP Model for the Synthesis of Heat Exchanger Networks with Handling Pressure of Process Streams
163(6)
Viviani C. Onishi
Mauro A. S. S. Ravagnani
Jose A. Caballero
Modelling of an Amine Based CO2 Absorption Plant: an Alternative Approach through the Identification of the Number of Stages
169(6)
Roberto Baralti
Massimiliano Errico
Daniele Pinna
Paolo Deiana
Marcella Porru
Optimal Superstructure-Based Design and Synthesis of Hydrocarbon Biorefinery via Fast Pyrolysis, Hydrogen Production and Hydroprocessing Pathway
175(6)
Qiao Zhang
Jian Gong
Fengqi You
Rate-based Modelling of Chilled Ammonia Process (CAP) for CO2 Capture
181(6)
Dawid P. Hanak
Chechet Biliyok
Hoi Yeung
Vasilije Manovic
Coupled Population Balance-CFD Modelling of a Continuous Precipitation Reactor
187(6)
Botond Szilagyi
Paul Serban Agachi
Reka Barabas
Bela G. Lakatos
Process Design for Extraction of Soybean Oil Bodies by Applying the Product Driven Process Synthesis Methodology
193(6)
Aleksandra Zderic
Tugba Tarakci
Nasim Hooshyar
Edwin Zondervan
Jan Meuldijk
Global Optimization for Flexible Heat Exchanger Network Synthesis of Chemical Plant
199(6)
Lautaro Braccia
Lucas Nieto Degliuomini
Patricio Luppi
Marta S. Basualdo
A Systems Approach for the Holistic Screening of Second Generation Biorefinery Paths for Energy and Bio-based Products
205(6)
Marinella Tsakalova
Aidong Yang
Antonis C. Kokossis
Full Bivariate MWD in RAFT Copolymerization using Probability Generating Functions
211(6)
Cecilia Fortunatti
Adriana Brandolin
Claudia Sarmoria
Mariano Asteasuain
Numerical and Optimisation Methodology
Numerical Investigations of Packed Bed Reactors with Irregular Particle Arrangements
217(6)
Theodoros Atmakidis
Eugeny Y. Kenig
Stabilization of Empty Fruit Bunch (EFB) derived Bio-oil using Antioxidants
223(6)
Chung Loong Yiin
Suzana Yusup
Parncheewa Udomsap
Boonyawan Yoosuk
Sittha Sukkasi
Three-scale Modeling and Simulation of a Batch Suspension Polymerization Vinyl Chloride Reactor
229(6)
Agnes Barkanyi
Sandor Nemeth
Bela G. Lakatos
Biodiesel Production from Waste Vegetable Oils: Combining Process Modelling, Multiobjective Optimization and Life Cycle Assessment (LCA)
235(6)
Luis-Fernando Morales Mendoza
Marianne Boix
Catherine Azzaro-Pantel
Ludovic Montastruc
Serge Domenech
A Novel Cross-decomposition Multi-cut Scheme for Two-Stage Stochastic Programming
241(6)
Sumit Mitra
Pablo Garcia-Herreros
Ignacio E. Grossmann
Optimal Wavelet-Threshold Selection to Solve Dynamic Optimization Problems
247(6)
Lizandro S. Santos
Argimiro R. Secchi
Evaristo C. Biscaia Jr.
Incorporating Green into Production and Consumption Behaviours toward Sustainable Logistics Optimization in Process Systems
253(6)
Yoshiaki Shimizu
Parametric Solution Algorithms for Large-Scale Mixed-Integer Fractional Programming Problems and Applications in Process Systems Engineering
259(6)
Zhixia Zhong
Fengqi You
Optimal Valve Spacing for Next Generation CO2 Pipelines
265(6)
Solomon Brown
Vikram Sundara
Sergey Martynov
Haroun Mahgerefteh
SMART: An Integrated Planning and Decision Support Tool for Solid Waste Management
271(6)
Sie Ting Tan
Haslenda Hashim
Chew Tin Lee
Jeng Shiun Lim
Wai Shin Ho
Jinyue Yan
Mass Transfer in a Porous Particle - MCMC Assisted Parameter Estimation of Dynamic Model under Uncertainties
277(6)
Petteri Suominen
Teuvo Kilpio
Tapio Salmi
Inventory Pinch Based Multi-Scale Model for Refinery Production Planning
283(6)
Pedro A. Castillo Castillo
Vladimir Mahalec
Estimation of Specific Fluxes in Metabolic Networks using Non-linear Dynamic Optimization
289(6)
Dominique Vercammen
Filip Logist
Jan Van Impe
Optimal Design of Heat Exchanger Networks by Using SQP Algorithm Based on GPU Acceleration
295(6)
Lixia Kang
Yongzhong Liu
Yuxing Ren
Yazhe Tang
Optimal Scheduling of Multi-stage Multi-product Biopharmaceutical Processes Using a Continuous-time Formulation
301(6)
Miguel Vieira
Tania Pinto-Varela
Ana Paula Barbosa-Povoa
Spatial-based Approach of the Hydrogen Supply Chain in the Midi-Pyrenees Region, France
307(6)
Sofia De-Leon Almaraz
Marianne Boix
Catherine Azzaro-Pantel
Ludovic Montastruc
Serge Domenech
Multi-Objective Meta-Heuristic Approach supported by an Improved Local Search Strategy for the Design and Planning of Supply Chain Networks
313(6)
Nelson Chibeles-Martins
Tania Pinto-Varela
Ana Paula Barbosa-Povoa
A. Q. Novais
Large-Scale Biorefinery Supply Network -- Case Study of the European Union
319(6)
Lidija Cucek
Mariano Martin
Ignacio E. Grossmann
Zdravko Kravanja
Optimal Chemical Product Design via Fuzzy Optimisation based Inverse Design Techniques
325(6)
Lik Yin Ng
Nishanth G. Chemmangattuvalappil
Denny K. S. Ng
Numerical Analysis of Radiant Section of Fired Heater Focused on the Effect of Wall-Tube Distance
331(6)
Jirl Hajek
Zdenek Jegla
Jirl Vondal
Logic-Based Outer Approximation for the Design of Discrete-Continuous Dynamic Systems with Implicit Discontinuities
337(6)
Ruben Ruiz-Femenia
Jose A. Caballero
Ignacio E. Grossmann
Problem Diagnostics and Model Refinement in Dynamic Parameter Estimation
343(6)
Neima Brauner
Mordechai Shacham
The Role of Mobile Devices in Computer Aided Process Engineering
349(6)
Mordechai Shacham
Michael B. Cutlip
Michael Elly
Modelling the Oxidation of Spent Uranium Carbide Fuel
355(6)
James Shepherd
Michael Fairweather
Peter Heggs
Bruce Hanson
Optimization of Performance Qualifiers during Oil Well Drilling
361(6)
Marcia Peixoto Vega
Marcela Galdino de Freitas
Andre Leibsohn Martins
Modelling and Optimization of Natural Gas Networks
367(6)
Tania Rodriguez
Daniel Sarabia
Mar Valbuena
Cesar de Prada
Process and Enterprise Operations
Steel Production Scheduling Optimization under Time-sensitive Electricity Costs
373(6)
Hubert Hadera
Iiro Harjunkoski
Ignacio E. Grossmann
Guido Sand
Sebastian Engell
Integration Framework for Improving Quality and Cost-Effectiveness n Pharmaceutical Production Processes
379(6)
Hirokazu Sugiyama
Masahiko Hirao
Optimal Design of Generalized Supply Chain Networks
385(6)
Magdalini A. Kalaitzidou
Pantelis Longinidis
Panagiotis Tsiakis
Michael C. Georgiadis
Intelligent Process Management for Continuous Operations in Pharmaceutical Manufacturing
391(6)
Arun Giridhar
Anshu Gupta
Matt Louvier
Girish Joglekar
Zoltan K. Nagy
Gintaras V. Reklaitis
Statistical Process Control based Energy Monitoring of Chemical Processes
397(6)
Tibor Kulcsar
Peter Koncz
Miklos Balaton
Laszlo Nagy
Janos Abonyi
A Bi-Criterion Optimization Planning Model for Process Networks with Multiple Scenarios and Environmental Impact
403(6)
Ahmad M. Alothman
Ignacio E. Grossmann
Combining Supplier Selection and Production-Distribution Planning in Food Supply Chains
409(6)
Pedro Amorim
Bernardo Almada-Lobo
Ana P.F.D. Barbosa-Povoa
Ignacio E. Grossmann
Embedding of Timed Automata-based Schedule Optimization into Recipe Driven Production
415(6)
Christian Schoppmeyer
Stephan Fischer
Jochen Steimel
Vinh Quang Do
Nan Wang
Sebastian Engell
Life-cycle Modelling for Fault Detection - Extraction of PCA Models from Flowsheeting Simulators
421(6)
Barbara Far sang
Sandor Nemeth
Janos Abonyi
Integration of Scheduling and ISA-95
427(6)
Iiro Harjunkoski
Stochastic Price/Cost Models for Supply Chain Management of Refineries
433(6)
Rafael Rasello
Davide Manca
Integrating Planning and Scheduling in an Oil Refinery with a Rolling Horizon Approach
439(6)
Edwin Zondervcm
Michiel Kaland
Martijn A.H. van Elzakker
Jan C. Fransoo
Jan Meuldijk
Improving the Energy Management of a Building Complex through Utility System Modelling
445(6)
Michal Tous
Vitezslav Masa
Martin Pavlas
Valentyn Avramov
Operation and Modeling of RO Desalination Process in Batch Mode
451(6)
Marta Barello
Davide Manca
Raj Patel
Iqbal M. Mujtaba
Simultaneous Nonlinear Reconciliation and Update of Parameters for Online Use of First-Principles Models: An Industrial Case-Study on Compressors
457(6)
Matteo Cicciotti
Dionysios P. Xenos
Ala E. F. Bouaswaig
Ricardo F. Martinez-Botas
Flavio Manenti
Nina F. Thornhill
Data-Based Tiered Approach for Improving Pharmaceutical Batch Production Processes
463(6)
Lukas G. Eberle
Hirokazu Sugiyama
Stavros Papadokonstantakis
Andreas Graser
Rainer Schmidt
Konrad Hungerbuhler
Plug Flow vs. Discontinuous Modelling Approaches for Plasma -- Based Dcpollution of Exhausts
469(6)
Valentina Gogulancea
Vasile Lavric
Application of Pricing Policies for Coordinated Management of Supply Chains
475(6)
Kefah Hjaila
Miguel Zamarripa
Ahmed Shokry
Antonio Espuna
Energy from Lignocellulosic Biomass: Supply Chain Modeling to Maximize Net Energy Production
481(6)
Helena Paulo
Ana Paula F.D. Barbosa-Povoa
Susana Relvas
SPIonWEB -- Ecological Process Evaluation with the Sustainable Process Index (SPI)
487(6)
Khurram Shahzad
Rene Kollmann
Stephan Maier
Michael Narodoslawsky
Reactive Scheduling for the Coordination of Energy Supply and Demand Management in Microgrids
493(6)
Javier Silvente
Georgios M. Kopanos
Efstratios N. Pistikopoulos
Antonio Espuna
Robust Production Planning and Scheduling of a Pulp Digester and a Paper Machine
499(6)
Goncalo Figueira
Bernardo Almada-Lobo
Modelling Cobalt Solvent Extraction using Aspen Custom Modeler
505(6)
Heather A. Evans
Parisa A. Bahri
Linh T.T. Vu
Keith R. Barnard
Hierarchical Production Scheduling -- A Case Study at Perstorp
511(6)
Anna Lindholm
Helene Lidestam
Nils-Hassan Quttineh
An Extended Comparative Study of Two- and Three-Way Methodologies for the On-line Monitoring of Batch Processes
517(6)
Raquel D. Moita
Veronique M. Gomes
Pedro M. Saraiva
Marco S. Reis
Integrated Scheduling and Dynamic Optimization for Network Batch Processes
523(6)
Yunfei Chu
Fengqi You
Integration of Scheduling and Control Using Internal Coupling Models
529(6)
Jungup Park
Juan Du
Iiro Harjunkoski
Michael Baldea
Dynamics and Control
Supervisory Control of a Drop on Demand Mini-manufacturing System for Pharmaceuticals
535(6)
Elcin Icten
Zoltan K. Nagy
Gintaras V. Reklaitis
Simultaneous Multi-Parametric Model Predictive Control and State Estimation with Application to Distillation Column and Intravenous Anaesthesia
541(6)
Ioana Nascu
Romain S.C. Lambert
Alexandra Krieger
Efstratios N. Pistikopoulos
Controller Design for Nonlinear Hammerstein and Wiener Systems Based on VRFT Method
547(6)
Jyh-Cheng Jeng
Yi-Wei Lin
Time-Optimal Control of Batch Multi-Component Diafiltration Processes
553(6)
Martin Jelemensky
Radoslav Paulen
Miroslav Fikar
Zoltan Kovacs
Novel Domain-Specific Language Framework for Controllability Analysis
559(6)
Afshin Sadrieh
Parisa A. Bahri
Polynomial Chaos Expansion (PCE) Based Surrogate Modeling and Optimization for Batch Crystallization Processes
565(6)
Nahid Sanzida
Zoltan K. Nagy
Multi-Objective and Robust Optimal Control of a CVD Reactor for Polysilicon Production
571(6)
Mattia Vallerio
Daan Claessens
Filip Logist
Jan Van Impe
On the Modeling of C7+ Fractions with Real Components in Plant Simulations
577(6)
Marcella Porru
Andrea Saliu
Roberto Baratti
Towards Model-Based Diagnosis of von Willebrand Disease
583(6)
Federico Galvanin
Andrea Monte
Alessandro Casonato
Roberto Padrini
Massimiliano Barolo
Fabrizio Bezzo
Control of Cyclic Distillation Systems
589(6)
Costin Sorin Bildea
Catalin Patrut
Anton A. Kiss
On the Stability of Set-Valued Integration for Parametric Nonlinear ODEs
595(6)
Mario E. Villanueva
Boris Houska
Benoit Chachuat
Statistical Control of Commercial Detergents Production through Fourier Transform Infra-Red Spectroscopy
601(6)
Alessandra Taris
Massimiliano Grosso
Fabio Zonfrilli
Vincenzo Guida
A Self-Optimizing Strategy for Optimal Operation of a Preheating Train for a Crude Oil Unit
607(6)
Johannes Jaschke
Sigurd Skogestad
Sugar Crystallization Benchmark
613(6)
Rogelio Mazaeda
Luis F. Acebes
Alexander Rodriguez
Sebastian Engell
Cesar de Prad
Dynamic Simulation and Control of Post-combustion CO2 Capture with MEA in a Gas Fired Power Plant
619(6)
Evgenia D. Mechleri
Chechet Biliyok
Nina F. Thornhill
A Methodology for Experimental Determination of Stability Boundaries with Application to Fluidized Bed Spray Granulation
625(6)
Stefan Palis
Christian Dreyschultze
Achim Kienle
Control Strategy Designs and Simulations for a Biological Waste Water Treatment Process
631(6)
Linh T.T. Vu
Mitchell S.J. Williams
Parisa A. Bahri
Optimal Integrated Operation of a Sugar Production Plant
637(6)
Reinaldo Hernandez
Lars Simora
Radoslav Paulen
Sven Wegerhoff
Rogelio Mazaeda
Cesar de Prada
Sebastian Engell
Sensitivity Enhancing Transformations for Large-Scale Process Monitoring
643(6)
Tiago J. Rato
Marco S. Reis
Data-driven Self-optimizing Control
649(6)
Salihu Adamu Girei
Yi Cao
Alhaji Shehu Grema
Lingjian Ye
Vinay Kariwala
Optimal Management of Sewer Networks during Wet Weather Event by Stochastic Dynamic Programming
655(6)
Sofiene Kachroudi
Damien Chenu
Nicolas David
A Data-Driven Approach for Analysing the Operational Behaviour and Performance of an Industrial Flue Gas Desulphurisation Process
661(6)
Martin Gassner
John Nilsson
Emma Nilsson
Thomas Palme
Heiko Zufle
Stefano Bernero
Algorithms and Methods for Identification of Multivariable Plants
667(6)
Claudio Garcia
Alain Segundo Potts
Rodrigo Juliani Correa de Godoy
Vitor Alex Oliveira Alves
Tiago Sanches da Silva
Optimal Operation and Control of Divided Wall Column
673(6)
Ambari Khanam
Mohammad Shamsuzzoha
Sigurd Skogestad
On-line Fault Diagnosis by Combining Functional and Dynamic Modelling of Chemical Plants
679(6)
Ismael Diaz
Manuel Rodriguez
Developing a Soft Sensor for an Air Separation Process Based on Variable Selection in Dynamic Partial Least Squares
685(6)
Jialin Liu
Ding-Sou Chen
Model Based Fault Diagnosis for Performance Control of a Decentralized Wastewater Treatment Plant
691(6)
Rita Ribeiro
Carla I.C. Pinheiro
Tatiana Arriaga
Helena M. Pinheiro
Maria do Ceu Almeida
CFD-Study for the Design of Injector / Conductivity Sensor Manifold
697(6)
Heinz A. Preisig
A New Functional Systems Theory based Methodology for Process Hazards Analysis
703(6)
Manuel Rodriguez
Ismael Diaz
Global Sensitivity Analysis for Control of Biological Wastewater Treatment
709(6)
Alicia Roman-Martinez
Pastor Lanuza-Perez
Margarito Cepeda-Rodriguez
Fast Nonlinear Predictive Control and State Estimation of Distillation Columns Using First-Principles Reduced-order Model
715(6)
Guilherme A. A. Goncalves
Argimiro R. Secchi
Evaristo C. Biscaia Jr.
Auto-Tuning of Multivariable PI/PID Controllers Using Iterative Feedback Tuning: Design Examples
721(6)
Steffen Sommer
Hoang N. Nguyen
Achim Kienle
MIMO Control during Oil Well Drilling
727(6)
Marcia Peixoto Vega
Marcela Galdino de Freitas
Andre Leibsohn Martins
Optimisation of a Sequencing Batch Reactor for Production of Polyhydroxybutyrate Using Process Characterisation Method and Neural Network Modelling
733(6)
Amin Ganjian
Jie Zhang
Rui Oliveira
Active Disturbance Rejection Control of a Neutralisation Process
739(6)
Alison Brown
Jie Zhang
A Novel Real-Time Methodology for the Simultaneous Dynamic Optimization and Optimal Control of Batch Processes
745(6)
Francesco Rossi
Flavio Manenti
Iqbal M. Mujtaba
Giulia Bozzano
A Simple PID Tuning Rule with Robustness Analysis for the Time Delay Process
751(6)
Ambari Khanam
Mohammad Shamsuzzoha
Process Design and Control of a Xylitol Production Reactor
757(6)
Hector Hernandez-Escoto
Divanery Rodriguez-Gomez
Ricardo Morales-Rodriguez
ANN-based Virtual Sensor for On-line Prediction of In-cylinder Pressure in a Diesel Engine
763(6)
Katarzyna Bizon
Gaetano Continillo
Simone Lombardi
Ezio Mancaruso
Bianca M. Vaglieco
Temperature Control of Enzymatic Batch Esterification Reactor Using Nonlinear Model Predictive Control (NMPC): A Real-Time Implementation
769(6)
Siti Asyura Zulkeflee
Suhari Abd Sata
Norashid Aziz
Multiple Input Multiple Output Nonlinear Autoregressive with Exogenous Input Model for Enzymatic Batch Esterification Reactor
775(6)
Siti Asyura Zulkeflee
Suhari Abd Sata
Norashid Aziz
Model Development and Experimental Validation for Crystal Shape Control by Using Tailored Mixtures of Crystal Growth Modifiers
781(6)
Akos Borsos
Aniruddha Majumder
Zoltan K. Nagy
Batch-to-batch Steady State Identification via Online Ensemble Empirical Mode Decomposition and Statistical Test
787(6)
Bi-Ling Huang
Yuan Yao
Robust NMPC of a Hydrodesulfuration Unit Using Multi-stage Stochastic Programing
793(6)
Ruben Marti
Daniel Navia
Daniel Sarabia
Cesar de Prada
Optimal Fuzzy Control of Batch Polymerization Reactors: Application to PMMA Production for Biomedical Purposes
799(6)
Nadson M. N. Lima
Lamia Zuniga Linan
Felix S. Farias Junior
Flavio Manenti
Rubens Maciel Filho
Marcelo Embirucu
Maria R. Wolf Maciel
Modelling and Design a Controller for Improving the Plating Performance of a Hard Chromium Electroplating Process
805(6)
Surasit Tanthadiloke
Paisan Kittisupakorn
Iqbal M. Mujtaba
Informatics and Knowledge Management
Investigations on Information-rich Visualizations to Explore Process Connectivity and Causality
811(6)
David D. Romero
Nina F. Thornhill
Tone-Grete Graven
Computer-Aided Template for Model Reuse, Development and Maintenance
817(6)
Marina Fedorova
Gurkan Sin
Rafiqul Gani
Public Protection Integrated Program Development for Chemical and Radiological Disasters
823(6)
Seungnam Kim
Kwanghee Lee
IL Moon
Forecasting of Naphtha Demand and Supply using lime Serial Data Causal Analysis
829(6)
Byeonggil Lyu
Hweeung Kwon
Jinsuk Lee
Haesub Yoon
Jaehyung Jin
IL Moon
Eigenvector Analysis for the Ranking of Control Loop Importance
835(6)
Simon J. Stretcher
St. Elmo Wilken
Carl Sandrock
Towards a Re-Usable Ontology for Waste Processing
841(6)
Nikolaos Trokanas
Franjo Cecelja
Tara Raafat
Optimising Environmental Performance of Symbiotic Networks Using Semantics
847(6)
Nikolaos Trokanas
Franjo Cecelja
Mingy en Yu. Tara Raafat
A Novel Knowledge Management System Based on Workflows
853(6)
Girish Joglekar
Arun Giridhar
Gintaras V. Reklaitis
Integration of Methods for Optimization in a Knowledge Management framework
859(6)
Edrisi Munoz
Elisabet Capon-Garcia
Jose Miguel Lainez-Aguirre
Antonio Espuna
Luis Puigjaner
A Graph Approach to Representing the Pressure Distribution in Complex Plants
865(6)
Heinz A. Preisig
Towards Automatic Construction of Domain Ontologies: Application to ISA88
871(6)
Javier Farreres
Moises Graells
Horacio Rodriguez
Antonio Espuna
Natural Language Modelling in Process Synthesis and Optimization
877(6)
Vassilis Magioglou
Marinella Tsakalova
Antonis Kokossis
Soft Sensor Development with Nonlinear Variable Selection Using Nonnegative Garrote and Artificial Neural Network
883(6)
Kai Sun
JiaLin Liu
Jia-Lin Kang
Shi-Shang Jang
David Shan-Hill Wong
Ding-Sou Chen
Automation in Process Industry: Cure or Curse? How can Training Improve Operator's Performance
889(6)
Salman Nazir
Annette Kluge
Davide Manca
Decision Support Tool for Strategic Planning in Supply Chains
895(6)
Pedro Costa
Maria Isabel Gomes
Ana Carvalho
Ana Barbosa-Povoa
Novel Computational & Numerical Methods
A Novel MaxEnt Method for the Solution of Two-Dimensional Population Balance Equation with Particle Growth
901(6)
Menwer Attarakih
Hans-Jorg Bart
Large Eddy Simulation of Non-spherical Particle Deposition in a Vertical Turbulent Channel Flow
907(6)
Derrick O. Njobuenwu
Michael Fairweather
An Integral Approach to Multi-physics Application for Packed Bed Reactors
913(6)
Bernhard Peters
Xavier Besseron
Alvaro Estupinan
Florian Hoffmann
Mark Michael
Amir Mouhmadi
Mohammad Mohseni
Measurement and Modelling of the Near-field Structure of Large-scale Sonic CO2 Releases from Pipelines
919(6)
Robert M. Woolley
Michael Fairweather
Christopher J. Wareing
Samuel A. E. G. Falle
Christophe Proust
Jerome Hebrard
Didier Jamois
Efficient Model Reduction of SMB Chromatography by Krylov-subspace Method with Application to Uncertainty Quantification
925(6)
Yao Yue
Suzhou Li
Lihong Feng
Andreas Seidel-Morgenstern
Peter Benner
Efficient Computational Methods for Microscopic Simulations in Multi-scale Systems
931(6)
Ioannis S. Fragkopoulos
Constantinos Theodoropoulos
Molecular Dynamics Simulations of Competitive Protein Adsorption onto Chromatographic Media
937(6)
Juan Liang
Georg Fieg
Sven Jakobtorweihen
Hybrid Modeling of Phase Transition for Evaporators and Condensers in Chillers
943(6)
Jing Wu
Christian Jallut
Emilie Gagniere
Francoise Couenne
Boussad Hamroun
Reformulation-linearization Method for Global Optimization of Mixed Integer Linear Fractional Programming Problems with Application on Sustainable Batch Scheduling
949(6)
Dajun Yue
Fengqi You
Product Quality Monitoring Using Extreme Learning Machines and Bat algorithms: A Case Study in Second-Generation Ethanol Production
955(6)
Felix S. Farias Junior
Renan A. Azevedo
Elmer C. Rivera
William E. Herrera
Rubens M. Filho
Luiz P. Lima Junior
Multi-level Optimization Framework Applied to the Systematic Evaluation of Metabolic Objective Functions
961(6)
Pavel Vaskan
Gonzalo Guillen-Gosalbez
Albert Sorribas
Rui Alves
Laureano Jimenez
Reynolds Number Effects on Particle Agglomeration in Turbulent Channel Flow
967(6)
Mohammad Ajkhami
Ali Hassanpour
Michael Fairweather
Derrick O. Njobuenwu
Sustainability and Life Cycle Analysis
Optimal Design of a Bioethanol Supply Chain Considering Different Environmental Impact Assessment Methods
973(6)
Gustavo Lucas
Fabrizio Bezzo
Ana Carvalho
Modeling Multi-period Operations using the P-graph Methodology
979(6)
Istvan Heckl
Laszlo Halasz
Adrian Szlama
Heriberto Cabezas
Ferenc Friedler
Life Cycle Modelling of Alternative Gas-fuelled Power Plants with CO2 Capture and Storage
985(6)
Zhenggang Nie
Anna Korre
Sevket Durucan
Investigation on Life-cycle Cost of Coal-based Synthetic Natural Gas (SNG)
991(6)
Jim Zhang
Hengchong Li
Siyu Yang
Xiuxi Li
Yu Qian
Knowledge Management Framework for Assessing Environmental Impact in the Enterprise
997(6)
Elisabet Capon-Garcia
Edrisi Munoz
Jose M. Lainez-Aguirre
Antonio Espuna
Luis Puigjaner
Konrad Hungerbuhler
Design Methodology of Biomass Utilization System Considering Impacts on Petroleum Refining Industry
1003(6)
Baharuddin Maghfuri
Hirokazu Sugiyama
Yasunori Kikuchi
Masahiko Hirao
Designing Energy Supply Chains with the P-graph Framework under Cost Constraints and Sustainability Considerations
1009(6)
Leisha Vance
Istvan Heckl
Botond Bertok
Heriberto Cabezas
Ferenc Friedler
Multi-Objective Optimization of US Economy via Multi-Regional Input-Output Analysis
1015(6)
Janire Pascual Gonzalez
Gonzalo Guillen Gosalbez
L. Jimenez Es teller
Techno-Economic, Sustainability & Environmental Impact Diagnosis (TESED) Framework
1021(6)
Carina L. Gargalo
Ana Carvalho
Henrique A. Matos
Rafiqul Gani
An Optimal Planning for the Reuse of Municipal Solid Waste Considering Economic, Environmental and Safety Objectives
1027(6)
Jose E. Santibanez-Aguilar
Juan Martinez-Gomez
Jose M. Ponce-Ortega
Fabricio Napoles-Rivera
Medardo Serna-Gonzalez
Mahmoud M. El-Halwagi
Life Cycle Assessment Based Process Design of CO2 Capture Options
1033(6)
Laurence Tock
Francois Marechal
Development of a Life Cycle Assessment Model for the Analysis of the Energy, Water and Food Nexus
1039(6)
Tareq Al-Ansari
Anna Korre
Zhenggang Nie
Nilay Shah
Simulation of Carbon Dioxide Capture Using Ionic Liquid 1-Ethyl-3-methylimidazolium Acetate
1045(6)
Koon Khonkaen
Kitipat Siemanond
Amr Henni
Biofuels from Residues of the Tequila Industry of Mexico
1051(6)
Pascual Eduardo Murillo-Alvarado
Jose Marla Ponce-Ortega
Agustin Jaime Castro-Montoya
Medardo Serna-Gonzalez
Mahmoud M. El-Halwagi
Sustainable Water Management in Cities
1057(6)
Ma. Guadalupe Rojas-Torres
Fabricio Napoles-Rivera
Merdardo Serna-Gonzalez
Mahmoud M. El-Halwagi
Jose Maria Ponce-Ortega
Functional-unit-based Life Cycle Optimization for Design of Sustainable Product Systems with Application on Biofuel Supply Chains
1063(6)
Dajun Yue
Fengqi You
GHG Emissions Minimization at the Macroeconomic Level via a Multi-objective Optimization/Input-output Approach: A Case Study of the EU-25 Economy
1069(6)
Daniel Cortes-Borda
Antonio Ruiz-Hernandez
Gonzalo Guillen-Gosalbez
Maria Llop
Roger Guimera
Marta Sales-Pardo
Handling of Uncertainty in Life Cycle Inventory by Correlated Multivariate Lognormal Distributions: Application to the Design of Supply Chain Networks
1075(6)
Juan A. Reyes-Labarta
Raquel Salcedo-Diaz
Ruben Ruiz-Femenia
Gonzalo Guillen-Gosalbez
Jose A. Caballero
Efficiency in Resources and Production
Assessment of Hydrogen Production Systems based on Natural Gas Conversion with Carbon Capture and Storage
1081(6)
Calin-Cristian Cormos
Letitia Petrescu
Ana-Maria Cormos
Comparative Analysis between Coal-to-Olefins with CCS and Methanol-to-Olefins
1087(6)
Zihao Mai
Dong Xiang
Xiuxi Li
Yu Qian
Biomass Characteristics Index: A Numerical Approach in Palm Bio-energy Estimation
1093(6)
Jiang Ping Tang
Hon Loong Lam
Mustafa Kamal Abdul Aziz
Noor Azian Morad
Plant-wide Process Improvement in Cooperation of Mathematical Optimization using the MIPT Algorithm in ChemCAD™
1099(6)
Hilke-Marie Lorenz
Daniel Otte
Daniel Staak
Jens-Uwe Repke
Modelling and Prediction of Renewable Energy Generation by Pressure Retarded Osmosis
1105(6)
Endre Nagy
Laszlo Hajba
Zsolt Prettl
Process for Synthesis of Biodiesel from Used Cooking Oil: Feasibility and Experimental Studies
1111(6)
Raj Patel
Karen Dawson
Richard Butterfield
Amir Khan
Bilal Ahada
Harvey Arellano-Garcia
Simulation and Optimization of Biofilm Activated Sludge Process for the Biological Treatment of Effluents from Cellulose and Viscose Industry
1117(6)
Marta Revilla
Javier Viguri
Berta Galan
Technical and Economic Analysis of Chemical Looping Combustion with Humid Air Turbine Power Cycle
1123(6)
Akeem Olaleye
Meihong Wang
Can Exergy be a Useful Tool for the Dairy Industry?
1129(6)
Mohammed T. Munir
Wei Yu
Brent R. Young
Optimum Sizing of PV-CAES Configurations for the Electrification of Remote Consumers
1135(6)
Dimitrios Zafirakis
Kosmas Kavadias
Emilia M. Kondili
John K. Kaldellis
Energy Management of a Hybrid Controlled Process with Renewable Sources
1141(6)
Lucas Nieto Degliuomini
Martin Cunningham
Facundo Ferreyra
Patricio A. Luppi
Marta S. Basualdo
Kinetic Modelling of Copper and Zinc Dissolution from Brass Obtained from Waste Electrical and Electronic Equipment
1147(6)
Ioana A. Popescu
Tamas Targa
Arpad Imre-Lucaci
Tibor Chovan
Petru Ilea
Flood Prevention in Jijia Catchment Using Control Structures Based on Hydraulic Modelling
1153(6)
Mihai L. Mogoc-Kirner
Mircea V. Cristea
Paul S. Agachi
Design and Optimisation
INES -- Interface between Experiments and Simulation
1159(6)
Norbert Asprion
Regina Benfer
Sergej Blagov
Roger Bottcher
Michael Bortz
Richard Welke
Jakob Burger
Erik von Harbou
Karl-Heinz Kufer
Hans Hasse
Dynamic Flux Balance Analysis in Cyanobacteria for Ethanol Production with Simultaneous Optimization Approaches
1165(6)
Claudio Delpino
Vanina Estrada
Juan Laglecia
Rebeca Vidal
Francisco Florencio
Miguel Garcia Guerrero
M. Soledad Diaz
Postulating Compartmental Models Using a Flexible Approach
1171(6)
Jose M. Lainez-Aguirre
Gary E. Blau
Gintaras V. Reklaitis
Optimization of Entraner Feeding in Batch Extractive Distillation
1177(6)
Laszlo Hegely
Peter Lang
An Optimisation-based Approach for Biopharmaceutical Manufacturing
1183(6)
Songsong Liu
Ana S. Simaria
Suzanne S. Farid
Lazaros G. Papageorgiou
Optimal Experiment Design for Model Discrimination using the Sigma Point Method
1189(6)
Dries Telen
Ioanna Stamati
Marcelo da Silva
Filip Logist
Jan Van Impe
Batch Distillation with Vapour Compression Applying Different Working Fluids
1195(6)
Gabor Modla
Peter Lang
Optimization of Alternative Distillation Sequences for Natural Gas Sweetening
1201(6)
Carlo E. Torres-Ortega
Juan Gabriel Segovia-Hernandez
Fernando I. Gomez-Castro
Salvador Hernandez
Adrian Bonilla-Petriciolet
Ben-Guang Rong
Massimiliano Errico
Decision Support for CO2 Capture Process Options under Uncertain Market Conditions using Multi-objective Optimisation
1207(6)
Laurence Tock
Francois Marechal
Operational Optimization of Compressors in Parallel Considering Condition-Based Maintenance
1213(6)
Dionysios P. Xenos
Georgios M. Kopanos
Matteo Cicciotti
Efstratios N. Pistikopoulos
Nina F. Thornhill
Network Design and Planning of Resilient Supply Chains
1219(6)
Sonia R. Cardoso
Ana Paula F. D. Barbosa-Povoa
Susana Relvas
Augusto Q. Novais
Solubility Parameter Prediction for Kacip Fatimah Herb using Group Contribution-Based Models
1225(6)
Siti Nuurul Huda Mohammad Azmin
Azizul Azri Mustaffa
Sharifah Rafidah Wan Alwi
Zainuddin Abdul Manan
Lee Suan Chua
On the Role of Mechanical Work Transfer in Optimization Procedures
1231(6)
Thassio Gomes
Heleno Bispo
Joao Manzi
Scenario-based Analysis of Potential and Constraints of Alkaline Electrochemical Cells
1237(6)
Ulrike Krewer
Daniel Schroder
Christine Weinzierl
Complementary Modelling of CO2 Capture by Reactive Absorption
1243(6)
Murat Yazgi
Alexander Olenberg
Eugeny Y. Kenig
Multi-objective Optimization of a Rectisol® Process
1249(6)
Manuele Gatti
Emanuele Martelli
Francois Marechal
Stefano Consonni
Hybrid CFD-Compartment Approach for Modelling and Optimisation of a Leaching Reactor
1255(6)
Szabolcs Fogarasi
Attila Egedy
Florica Imre-Lucaci
Tamas Varga
Tibor Chovan
Energy Saving in Conventional and Unconventional Batch Reactive Distillation: Application to Hydrolysis of Methyl Lactate System
1261(6)
Elmahboub A. Edreder
Mansour Emtir
Iqbal M. Mujtaba
Multiobjective Optimization of Biomass to Energy Supply Chains in an Uncertain Environment
1267(6)
Sebnem Yilmaz Balaman
Hasan Selim
Using Thermodynamic Insight in the Optimization of TNG Processes
1273(6)
Bjørn Austbø
Truls Gundersen
An Adaptive Normal Constraint Method for Bi-Objective Optimal Synthesis of Energy Systems
1279(6)
Maike Hennen
Philip Voll
Andre Bardow
A Quick Knapsack Heuristic Solution for Pharmaceutical R&D Pipeline Management Problems
1285(6)
Brianna Christian
Selen Cremaschi
Clustering Urban Areas for Optimizing the Design and the Operation of District Energy Systems
1291(6)
Samira Fazlollahi
Luc Girardin
Francois Marechal
Integrating Queuing Theory and Finite Automata in a Systems Framework for Financial Risk Modelling of Engineering Process Systems
1297(6)
Indranil Pan
Anna Korre
Sevket Durucan
An Integrated Design Method for Rotating Packed Beds for Distillation
1303(6)
Daniel Sudhoff
Kolja Neumann
Philip Lutze
Water Network Design with Treating Units by Four-Step Calculation Procedure
1309(6)
Sarut Thongpreecha
Kitipat Siemanond
Extractive Distillation Process Optimisation of the 1.0-1a Class System, Acetone - methanol with Water
1315(6)
Xinqiang You
Ivonne Rodriguez-Donis
Vincent Gerbaud
Design and Implementation of a Real Time Optimization Prototype for a Propylene Distillation Unit
1321(6)
Elyser E. Martinez
Fabio D.S. Liporace
Rafael D.P. Soares
Galo A.C. Le Roux
Simple Equation for Suitability of Heat Pump Use in Distillation
1327(6)
Valentin Plesu
Alexandra E. Bonet Ruiz
Jordi Bonet
Joan Llorens
Optimal Extractive Distillation Process for Bioethanol Dehydration
1333(6)
Anton A. Kiss
Radu M. Ignat
Costin S. Bildea
Synthesizing Flexible Process Networks by Two Stage P-graphs
1339(6)
Eva Konig
Karoly Kalauz
Botond Bertok
Process Scheduling by Synthesizing Time Constrained Process-Networks
1345(6)
Marion Frits
Botond Bertok
Equation-Oriented Models of Multistream Heat Exchangers for Flowsheet Optimization
1351(6)
Richard C. Pattison
Michael Baldea
Framework to Batch Process Retrofit - A Continuous Improvement Approach
1357(6)
Tania Pinto-Varela
Ana Carvalho
Ana Barbosa-Povoa
The Integration of the Synthesis Methodology in the Design of a Five-Component Distillation Sequence
1363(6)
Massimiliano Errico
Pietro Pirellas
Ben-Guang Rong
Carlo E. Torres-Ortega
Juan Gabriel Segovia-Hernandez
Isobutane Alkylation Process Synthesis by means of Hybrid Simulation-Multiobjective Optimization
1369(6)
Maria J. Fernandez-Torres
Norberto Garcia
Jose A. Caballero
Mechanical Design and Hydraulic Analysis of Sieve Trays in Dividing Wall Columns
1375(6)
Mario A. Rodriguez-Angeles
Fernando I. Gomez-Castro
Juan G. Segovia-Hernandez
Claudia Gutierrez-Antonio
Abel Briones-Ramirez
Economic Optimisation of Seawater Reverse Osmosis Desalination with Boron Rejection
1381(6)
Georgios Patroklou
Iqbal M. Mujtaba
Suitable Process Modelling for Proper Multi-Objective Optimization of Process Flow Sheets
1387(6)
Zorka Novak Pintaric
Zdravko Kravanja
Computational Fluid Dynamics Modeling for Chromatographic Purification of Free Lutein
1393(6)
Weerapong Choopakdee
Phattanon Prasitchoke
Artiwan Shotipruk
Pimporn Ponpesh
Optimal Design of a Hybrid Membrane System Combining Reverse and Forward Osmosis for Seawater Desalination
1399(6)
Raquel Salcedo-Diaz
Ruben Ruiz-Femenia
Jose A. Caballero
Comparison between Interval Methods to Solve Initial Value Problems in Chemical Process Design
1405(6)
Carlos Perez-Galvan
I. David
L. Bogle
Optimization of Extractive Distillation Process with a Single Column for Anhydrous Ethanol Production
1411(6)
Wagner B. Ramos
Marcella F. Figueiredo
Romildo P. Brito
Modelling and Optimization of Methylene Blue Adsorption from Aqueous Solution Using Bentonite Clay
1417(6)
Ivana Savic
Dragoljub Gajic
Stanisa Stojiljkovic
Ivan Savic
Stefano di Gennaro
Optimization of a Multiproduct Lignocellulosic Biorefinery using a MILP Approximation
1423(6)
Aristide Giuliano
Raffaele Cerulli
Massimo Poletto
Giancarlo Raiconi
Diego Barletta
Sustainable Design and Synthesis of Algal Biorefinery for Biofuel Production
1429(6)
Jian Gong
Fengqi You
Modeling and Optimization of Propylene Polymerization with Branching
1435(6)
Anitha Mogilicharla
Saptarshi Majumdar
Kishalay Mitra
Modeling and Optimization of an Adsorption Process for the Recovery of Catechins from Green Tea
1441(6)
Miguel Monsanto
Adithya Thota Radhakrishnan
David Sevillano
Nasim Hooshyar
Jan A.N. Meuldijk
Edwin Zondervan
Optimal Sensor Placement for Contamination Detection and Identification in Water Distribution Networks
1447(6)
Venkata Reddy Palled
Shankar Narasimhan
Raghunathan Rengaswamy
Expected Value Analysis for an Industrial Grinding Process with Fuzzy Uncertain Parameters
1453(6)
Nagajyothi Virivind
Kishalay Mitra
Optimization of Insulin Dosing in Patients with Type 1 Diabetes Mellitus
1459(6)
Stamadna Zavitsanou
Athanasios Mantalaris
Michael C. Georgiadis
Efstrados N. Pistikopoulos
Ternary Blends of Vegetable Oils: Thermal Profile Predictions for Product Design
1465(6)
Moises Teles dos Santos
Vincent Gerbaud
Galo A.C. Le Roux
Effect of Flow Pattern on Single and Multi-stage High Temperature Proton Exchange Membrane Fuel Cell Stack Performance
1471(6)
Suthida Authayanun
Ardtaya Patniboon
Dang Saebea
Yaneeporn Patcharavorachot
Amorchai Arpronwichanop
Optimal Multi-floor Plant Layout based on the Mathematical Programming
1477(6)
Chang Jun Lee
Attainment of Kinetic Parameters and Model Validation for Nylon-6 Process
1483(6)
Vanessa I. Funai
Delba N. C. Melo
Nadson M. N. Lima
Ana F. Pattaro
Lamia Zuniga Linan
Anderson J. Bonon
Rubens Maciel Filho
Process Integration
Simulation and Process Integration for TAME Synthesis
1489(6)
Olivia A. Perederic
Valentin Plecu
Petrica Iancu
Gheorghe Bumbac
Alexandra-Elena Bonet-Ruiz
Jordi Bonet-Ruiz
Bertram Muchan
Electricity Load Reduction in Hybrid Power Systems Using Power Pinch Analysis
1495(6)
Nor Erniza Mohammad Rozad
Ong Su Tin
Sharifah Rafidah Wan Alwi
Zainuddin Abdul Manan
Jiri Jaromir Klemes
Mohammad Yusri Hassan
Energy Minimization in Cryogenic Distillation Columns Through Intermediate Side Heat Exchangers
1501(6)
J. Rafael Alcantara-Avila
Fernando I. Gomez-Castro
J. Gabriel Segovia-Hernandez
Ken-Ichiro Sotowa
Toshihide Horikawa
Premises for a combined Exergy and Pinch Optimization within ProSimPlus® simulator
1507(6)
Stephane Gourmelon
Raphaele Hetreux
Pascal Floquet
Philippe Baudet
Olivier Baudouin
Integrating the Concept of Bio-Refinery onto the Biogas Field: the BIOREFIEL Strategy
1513(6)
Flavio Manenti
Fabrizio Adani
Sustainable Integration of Heat Exchanger Networks and Utility Systems
1519(6)
Luis Fernando Lira-Barragan
Jose Maria Ponce-Ortega
Medardo Serna-Gonzalez
Mahmoud M. El-Halwagi
Energy Supply Chain Optimisation: Special Considerations for the Solution of the Energy Planning Problem
1525(6)
Christiana Papapostolou
Emilia M. Kondili
John K. Kaldellis
Multi-objective Optimization of Heat Integrated Water Networks in Petroleum Refineries
1531(6)
Shivom Sharma
Gade Pandu Rangaiah
Study of Integration of Cryogenic Air Energy Storage and Coal Oxy-fuel Combustion through Modelling and Simulation
1537(6)
Kelvin Andre Pacheco
Yongliang Li
Meihong Wang
Process Design Analysis for the Valorisation and Selection of Integrated Micro-algae Biorefineries
1543(6)
Melina Psycha
Kostantinos Pyrgakis
Antonis C. Kokossis
A Design Methodology for Retrofit of Crude Oil Distillation Systems
1549(6)
Victor M. Enriquez-Gutierrez
Megan Jobson
Robin Smith
Biomass Drying for an Integrated Power Plant: Effective Utilization of Waste Heat Tesfaldet Gebreegziabher, Adetoyese Olajire Oyedun, Zhang Yu, Wang Maojian
1555(6)
Zhu Yi
Liu Jin
Chi Wai Hui
An Improved Linear Programming Approach for Simultaneous Optimization of Water and Energy
1561(6)
Maziar Kermani
Zoe Perin-Levasseur
Marzouk Benali
Luciana Savulescu
Francois Marechal
The Total Site Approach as a Synthesis Tool for the Selection of Valorization Paths in Lignocellulosic Biorefineries
1567(6)
Mie hail E. Stefanakis
Konstantinos A. Pyrgakis
Aikaterini D. Mountraki
Antonis C. Kokossis
Screening Curve Method for Optimum Source Sizing to Satisfy Time Varying Demand
1573(6)
Krishna Priya G.S.
Santanu Bandyopadhyay
Multi-objective Heat Exchanger Networks Synthesis Considering Economic and Environmental Optimization
1579(6)
Mauro A. S. S. Ravagnani
Thiago B. Mano
Esdras P. Carvalho
Aline P. Silva
Caliane B. B. Costa
Comparison among Proposals for Energy Integration of Processes for 1G/2G Ethanol and Bioelectricity Production
1585(6)
Cassia M. Oliveira
Antonio J. G. Cruz
Caliane B. B. Costa
Design of Optimal Reactive Distillation Processes for ETBE Production using Rigorous Thermodynamic Models
1591(6)
Gisela N. Durruty
M. Soledad Diaz
Patricia M. Hoch
Systematic Approach to Factory Acceptance Test Planning
1597(6)
Michal Kopcek
Tomas Skulavik
Pavol Tanuska
Dusan Mudroncik
Optimal Integration of a Concentrated Solar Plant Facility with a Biomass Based Polygeneration System
1603(6)
Marta Vidal
Lidia Martin
Mariano Martin
Pinch Analysis of an Industrial Batch Process for the Refining of Vegetable Oil
1609(6)
Bruno S. Custodio
Henrique A. Matos
Fernando G. Martins
Antonio L. Oliveira
Electric Field Driven Separation of Oil-water Mixtures: Model Development
1615(6)
Wilma Wallau
Raj Patel
Iqbal Mujtaba
Harvey Arellano-Garcia
Reconfiguration of an Oilseed Processing Plant into a Whole-crop Biorefinery
1621(6)
Jose F.O. Granjo
Belmiro P.D. Duarte
Nuno M.C. Oliveira
Advantages of Process Integration Evaluated by Gibbs Energy: Biodiesel Synthesis Case
1627(6)
Valentin Plesu
Jordi Bonet
Alexandra E. Bonet Ruiz
Joan Llorens
Process Simulation and Analysis for CO2 Transport Pipeline Design and Operation -- Case Study for the Humber Region in the UK
1633(6)
Xiaobo Luo
Ketan Mistry
Chima Okezue
Meihong Wang
Russell Cooper
Eni Oko
Julian Field
Process Simulation and Modelling for Sustainability
Reliability and Availability Analysis of Process Systems under Changing Operating Conditions
1639(6)
Soo Hyoung Choi
Dynamic Modeling and Validation of Post-combustion Calcium-looping Process
1645(6)
Ana-Maria Cormos
Abel Simon
Effect of Liquefaction Plant Performance and Location on the Cost of CO2 Transport
1651(6)
Jimer Zahid
Jinjoo An
Ung Lee
Chonghun Han
Optimal Control Strategies for Wastewater Stabilization Ponds
1657(6)
Maria P. Ochoa
Vanina Estrada
Patricia M. Hoch
Decision Support System for Effective Use of Woody and Herbaceous Biomass
1663(6)
Yasuto Kawashima
Shinji Hasebe
Mathematical Modelling of Coal and Biomass Gasification: Comparison on the Syngas H2/CO Ratio under Different Operating Conditions
1669(6)
Michele Corbetta
Flavio Manenti
Fiona Soares
Zohreh Ravaghi-Ardebili
Eliseo Rami
Carlo Pirola
Guido Buzzi-Ferraris
Sauro Pierucci
Simultaneous Optimization Models for Heat Exchanger Network Synthesis with Multiple Utilities: A New Strategy by Using Utility Sub-stage
1675(6)
Jonggeol Na
Jaeheum Jung
Chansaem Park
Chonghun Han
Techno-economic Analysis of a Thermochemical Lignocellulosic Biomass-to-Bulanol Process
1681(6)
Chinedu O. Okoli
Thomas A. Adams
Design and Exergy Analysis of Combined Rankine Cycle Using ENG Cold Energy
1687(6)
Ung Lee
Chonghun Han
Stochastic Optimization of the Strategic Planning Supply Chain of Biorefineries: Large Scale Models
1693(6)
Pablo A. Rodriguez-Gonzalez
Sergio Frausto-Hernandez
Ulises I. Bravo-Sanchez
Performance Analysis of a Biomass Supercritical Water Gasification Process under Energy Self-sufficient Condition
1699(6)
Amornchai Arpornwichanop
Nathapol Boonpithak
Sooralhep Kheawhom
Pimporn Ponpesh
Suthida Authayanun
Eenske and Kremser Group Methods in the Design of fully Thermally Coupled Distillation Column
1705(6)
Hosanna Uwitonze
Amit Goyal
Sejung Kim
Sungkwon Kim
Kyu Suk Hwang
Dynamic Modelling and Solution Studies on Absorption of CO2 in Rotated Packing Bed
1711(6)
Jia-Lin Kang
Kai Sun
David Shan-Hill Wong
Shi-Shang Jang
Chung-Sung Tan
Molecular Dynamics Study of Diffusion Behaviors of CO2 and N2 Confined to a Uni-directional Zeolite Structure
1717(6)
Kiwoong Kim
Won Bo Lee
Modelling, Simulation and Dynamic Analysis of the L-lysine Production Process
1723(6)
Teresa Lopez-Arenas
Omar Anaya-Reza
Rodolfo Quintero-Ramirez
Mauricio Sales-Cruz
Capturing Uncertainties for Sustainable Operation of Autothermal Thermophilic Aerobic Digestion Systems
1729(6)
Natasha G. Vaklieva-Bancheva
Elisaveta G. Kirilova
Raika K. Vladova
Thermodynamic Study of Hydrogen Production via Bioglycerol Steam Reforming
1735(6)
Zsolt Tasnadi-Asztalos
Arpad Imre-Lucaci
Calin-Cristian Cormos
Ana-Maria Cormos
Mihaela-Diana Lazar
Paul-Serban Agachi
Integrated Model Based Framework for Calculation of Geometry Changes in Leaching Process
1741(6)
Attila Egedty
Szabolcs Fogarasi
Tamas Varga
Arpad Imre-Lucaci
Tibor Chovan
A Mathematical Programming Approach for the Optimal Synthesis of Nanofibers through Electrospinning Process
1747(6)
Julia Hernandez-Vargas
Jannett Betzabe Gonzalez-Campos
Javier Lara-Romero
Jose Maria Ponce-Ortega
Simulation and Optimization of an Integrated CCL Capture and Storage System
1753(6)
Sungho Kim
Seok Goo Lee
Taekyoon Park
Chonghun Han
Jae Wook Ko
Jong Min Lee
Optimization of Microalgal Bioreactor Oil Production via Run-to-run Control
1759(6)
Jung Hun Kim
Sung Jin Yoo
Dong Hwi Jeong
Gibaek Lee
Jong Min Lee
Dynamic Modelling of Particle Formulation in Horizontal Fluidized Beds
1765(6)
Katja Meyer
Andreas Buck
Evangelos Tsotsas
Multivariate Hammerstein Structures: A Qualitative Accuracy Comparison to New Input-State Block Structure
1771(6)
Omar Naeem
Adire E. Huesman
Process design and Economics for Bioethanol Production Process from Palm Empty Fruit Bunch (EFB)
1777(6)
Truong Xuan Do
Young-il Lim
Sungsoo Jang
Hwa-Jee Chung
Yong-Wook Lee
Automatic Generation of Process Operating Window - Tracking Vortex Birth Inside Coating Flow
1783(6)
Jaewook Nam
Efficient Energy Integrated Solutions for Manufacturing Industries (EFENIS)
EFENIS: Efficient Energy Integrated Solutions for Manufacturing Industries. European Context
1789(6)
Robin Smith
Nan Zhang
Simon Perry
Igor Bulatov
Wulf Dietrich
Daniela Koelsch
Jiri J. Klemes
Petar S. Varbanov
Mathematical Programming Approach to Total Site Heat Integration
1795(6)
Andreja Nemet
Jiri Jaromir Klemes
Zdravko Kravanja
Total Site Heat Integration Targeting Algorithm Incorporating Plant Layout Issues
1801(6)
Peng Yen Liew
Sharifah Rafidah Wan Alwi
Jiri Jaromir Klemes
New Multiple Time Grid Continuous-Time Formulation for the Cyclic Scheduling of an Industrial Batch Plant
1807(6)
Djeide Rodrigues
Pedro M. Castro
Henrique A. Matos
Process Utility Systems Conceptual Design by Graphical Methods
1813(6)
Li Sun
Steve Doyle
Robin Smith
Energy Integration Manager: A Workflow for Long Term Validity of Total Site Analysis and Heat Recovery Strategies
1819(6)
Timo Bohnenstaedt
Christopher Brandt
Georg Fieg
Wulf Dietrich
Design and Operational Planning of an Urban Energy Network based on Combined Heat and Power Generators
1825(6)
Nikolaos E. Koltsaklis
Georgios M. Kopanos
Dimitrios Konstantinidis
Michael C. Georgiadis
Trilateral f lash Cycle for Recovery of Power from a Finite Low-Grade Heat Source
1831(6)
Habeeb A. Ajimotokan
Ilai Sher
Chechet Biliyok
Hoi Yeung
Green Energy
Sustainable Development -- Challenges for the European CAPE Community
1837(6)
Michael Narodoslawsky
Synthesis of Water, Wastewater Treatment, and Heat-Exchanger Networks
1843(6)
Nidret Ibric
Elvis Ahmetovic
Zdravko Kravanja
Optimal Renewable Energy Systems for Smart Cities
1849(6)
Stephan Maier
Michael Narodoslawsky
New Energy Planning Software for Analysis of Island Energy Systems and Microgrid Operations -- H2RES Software as a Tool to 100% Renewable Energy System
1855(6)
Goran Gasparovic
Goran Krajacic
Neven Duic
Mato Baotic
Sustainability Analysis of Copper Extraction and Processing using Life Cycle Analysis Methods: a Case Study in the North of Chile
1861(6)
Julio Castro-Molinare
Anna Korre
Sevket Durucan
Economic Viability and Environmental Impact of Centralized Biogas Plants in Croatia
1867(6)
Tomislav Novosel
Tomislav Puksec
Neven Duic
Identification of Process Integration Options for Carbon Capture
1873(6)
Peng Yen Liew
Petar Sabev Varbanov
Igor Bulatov
Simon John Perry
Mona Gharaie
Nan Zhang
Euan Fenelon
Aggelos Doukelis
Georgios Dimitriadis
Footprints Evaluation of China's Coal Supply Chains
1879(6)
Yuli Shan
Lidija Cucek
Petar S. Varbanov
Jiri J. Klemes
Kexi Pan
Hanxiong Zhu
Process Disturbances Detection via Spectral Graph Analysis
1885(6)
Estanislao Musulin
An Ontology-based Framework to Support Multivariate Qualitative Data Analysis
1891(6)
Fernando Roda
Estanislao Musulin
Diagnosing Process/Model Mismatch in First-Principles Models by Latent Variable Modeling
1897
Natascia Meneghetti
Pierantonio Facco
Fabrizio Bezzo
Massimiliano Barolo
Prof Dr-Hab Jií Jaromír KLEME, DSc, Dr h c (mult) and George Pólya Professor.

Head of a Centre of Excellence Sustainable Process Integration Laboratory SPIL”, NETME Centre, Faculty of Mechanical Engineering, Brno University of Technology - VUT Brno, Czech Republic.

Previously the Project Director, Senior Project Officer and Hon Reader at Department of Process Integration at UMIST, The University of Manchester and the University of Edinburgh, UK Founder and a long-term Head of the Centre for Process Integration and Intensification CPI2, University of Pannonia, Veszprém, Hungary. Awarded by the EC with Marie Curie Chair of Excellence (EXC). Track record of managing and coordinating 97 major EC, NATO, bilateral and UK Know-How projects. Research funding attracted over 46 M.

Co-Editor-in-Chief of Journal of Cleaner Production (IF 2020 = 9.297) and Chemical Engineering Transactions, Editor in Chief Cleaner Technologies and Engineering and Cleaner Chemical Engineering (Elsevier); Subject Editor of Energy (IF 2020 = 7.147) Managing Guest Editor of Renewable and Sustainable Energy Reviews (IF 2020 = 14.982). The founder and President of 25 y of PRES (Process Integration for Energy Saving and Pollution Reduction) conferences. Seven years Chairperson of CAPE Working Party of European Federation of Chemical Engineering, a member of WP on Process Intensification. A Member of the IChemE, UK, Sargent Medal International Committee on CAPE. Awarded by the Web of Science and Publons as a Highly Cited Researcher, Top Peer Reviewer and Top Handling Editor. He authored and co-authored 792 papers (WoS) in 106 scientific journals, h-index in Google Scholar 78, Scopus 67, PUBLONS (WoS) 61. His Publons profile (Web of Science) has 2,552 reviews for 186 scientific journals and 17,020 Editor Merits for 24 Editorial boards.

Invited lecturer at 68 universities, 14 Distinguished Visiting Professor, 6 Doctor Honoris causa, 36 PhD students, 44 Expert Evaluator.

Invited lecturer at 52 universities world-wide including Cornell, Ithaca, and North-West University Chicago, USA; Fudan University and SINOPEC Shanghai Research Institute of Petrochemical Technology, Shanghai; Tsinghua and Chinese Academy of Sciences, Beijing, South China University of Technology, Guangzhou, Xian Jiaotong University, China; Hong-Kong Polytechnic University; National Chengchi University and National Taiwan, Taipei, Taiwan; Hanyang University, and Korea Universities, Seoul, Republic of Korea; Institute of Food Research, Norwich Research Park, Colney, Norwich, Imperial College, London, UK; Norwegian University of Science and Technology NTNU, Trondheim, Norway; Tomsk Technological University, Tomsk, Russian Federation; S. Amanzholov East Kazakhstan State University, Ust-Kamenogorsk, Kazakhstan; University of Paderborn and Bayer Technology Services GmbH, Leverkusen and BASF Board of Directors Forum on Process Technology, Ludwigshafen, Germany; VTT Energy, Finland; VITO MOL, Belgium: MOL Hungarian Oil Company, DUSLO ala, Slovakia, TNO Leiden, Groningen, Zeist and Eindhoven; Utrecht and Delft University, the Netherlands; University Politechnica Leonardo da Vinci, Milano, Università degli studi di Genova and Sapienza, Rome, Italy; Universidad Industrial de Santander, Colombia; King Mongkuts University of Technology Thonburi, Bangkok, Thailand, Faculdade de Engenharia da Universidade do Porto, Oporto, Portugal, CEA Grenoble, France; Charmers and Stockholm University, Sweden.

Several times Distinguished Visiting Professor incl Universiti Teknologi Malaysia and University Technology Petronas, Malaysia; Xian Jiaotong University; the South China University of Technology, Guangzhou, Xian Jiaotong-Liverpool University Suzhou, JiangSu, and Tianjin University in China; University of Maribor, Slovenia; the Brno University of Technology, the Russian Mendeleev University of Chemical Technology, Moscow and Cracow University of Technology, Poland.

Doctor Honoris Causa of Kharkiv National University Kharkiv Polytechnic Institute”, Ukraine, the University of Maribor, Slovenia, University POLITEHNICA Bucharest, Romania, Széchenyi István University Györ, Hungary and Honorary Doctor of Engineering” Universiti Teknologi Malaysia”.

Awarded with Honorary Membership of Czech Society of Chemical Engineering”, European Federation of Chemical Engineering (EFCE) Life-Time Achievements Award” and Pro Universitaire Pannonica” Gold Medal.