Muutke küpsiste eelistusi

E-raamat: 26th European Symposium on Computer Aided Process Engineering: Part A and B

Volume editor (University of Maribor, Slovenia)
  • Formaat - EPUB+DRM
  • Hind: 477,75 €*
  • * hind on lõplik, st. muud allahindlused enam ei rakendu
  • Lisa ostukorvi
  • Lisa soovinimekirja
  • See e-raamat on mõeldud ainult isiklikuks kasutamiseks. E-raamatuid ei saa tagastada.

DRM piirangud

  • Kopeerimine (copy/paste):

    ei ole lubatud

  • Printimine:

    ei ole lubatud

  • Kasutamine:

    Digitaalõiguste kaitse (DRM)
    Kirjastus on väljastanud selle e-raamatu krüpteeritud kujul, mis tähendab, et selle lugemiseks peate installeerima spetsiaalse tarkvara. Samuti peate looma endale  Adobe ID Rohkem infot siin. E-raamatut saab lugeda 1 kasutaja ning alla laadida kuni 6'de seadmesse (kõik autoriseeritud sama Adobe ID-ga).

    Vajalik tarkvara
    Mobiilsetes seadmetes (telefon või tahvelarvuti) lugemiseks peate installeerima selle tasuta rakenduse: PocketBook Reader (iOS / Android)

    PC või Mac seadmes lugemiseks peate installima Adobe Digital Editionsi (Seeon tasuta rakendus spetsiaalselt e-raamatute lugemiseks. Seda ei tohi segamini ajada Adober Reader'iga, mis tõenäoliselt on juba teie arvutisse installeeritud )

    Seda e-raamatut ei saa lugeda Amazon Kindle's. 

26th European Symposium on Computer Aided Process Engineering contains the papers presented at the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event held at Portoro Slovenia, from June 12th to June 15th, 2016.

Themes discussed at the conference include Process-product Synthesis, Design and Integration, Modelling, Numerical analysis, Simulation and Optimization, Process Operations and Control and Education in CAPE/PSE.

Muu info

Presents findings and discussions from the 26th European Society of Computer-Aided Process Engineering (ESCAPE) Event held in Portoroz, Slovenia, with coverage of process product synthesis, design integration, modeling, and more
Part A
Preface
xxv
Committee
xxvii
Modelling and iterative Real-time Optimization of a homogeneously catalyzed hydroformylation process
1(6)
Reinaldo Hernandez
Sebastian Engell
Integrated management of hierarchical levels: towards a CAPE tool
7(6)
Canan Dombayci
Sergio Medina
Moises Graells
Antonio Espuna
Mathematical Optimization of Real-time Waste Incineration Scheduling in the Industry
13(6)
Matteo L. Abaecherli
Daniel Santos Gonzalez
Elisabet Capon-Garcia
Konrad Hungerbuhler
Modelling SER Biomass Gasification Using Dynamic Neural Networks
19(6)
Alia Salah
Lutz Hanel
Marcel Beirow
Gunter Scheffknecht
PERKS: Software for Parameter Estimation in Reaction Kinetic Systems
25(6)
Aditya Tulsyan
Paul I. Barton
Optimization of a Sour Water Stripping Plant Using Surrogate Models
31(6)
Natalia Quirante
Jose A. Caballero
Security Analysis of the Electronic Management System for a Total Site Utility System
37(6)
Oscar Manso
Enhanced production of methanol from switchgrass: CO2 to methanol
43(6)
Mariano Martin
Ignacio E. Grossmann
Techno-economic analysis of the production of epichlorhydrin from glycerol
49(6)
Alberto Almena
Mariano Martin
Kriging based Fault Detection and Diagnosis Approach for Nonlinear Noisy Dynamic Processes
55(6)
Ahmed Shokry
Mohammadhamed Ardakani
Gerard Escudero
Moises Graells
Antonio Espuna
Kinetics of Phycocyanobilin Cleavage from C-Phycocyanin by Methanolysis
61(6)
Chandrakant R. Malwade
Maria C. Roda-Serrat
Knud V. Christensen
Xavier Frette
Lars P. Christensen
Simulation of Turbulent Particulate Flows for Nuclear Waste Management: Agglomeration in Vertical Flows
67(6)
Derrick O. Njobuenwu
Michael Fairweather
A feasibility-based algorithm for Computer Aided Molecular and Process Design of solvent-based separation systems
73(6)
Smitha Gopinath
Amparo Galindo
George Jackson
Claire S. Adjiman
Multiobjective Retrofitting Methodology for Manufacturing Processes of Active Pharmaceutical Ingredients Considering Environment, Health and Safety Risks
79(6)
Hirokazu Sugiyama
Akiko Segawa
Satoshi Yoshikawa
Takayuki Toyama
Hayao Nakanishi
Emi Kikuchi-Uehara
Masahiko Hirao
Performance Evaluation of Unsteady Processes with Dynamic and Temporal Flexibility Indices
85(6)
Ruei-Shing Wu
Yi-Chung Kuo
Chuei-Tin Chang
Solution of Chance-Constrained Mixed-Integer Nonlinear Programming Problems
91(6)
Erik Esche
David Muller
Sebastian Werk
Ignacio E. Grossmann
Gunter Wozny
Hydrogen Sulphide Scavenging Simulation in HYSYS
97(6)
Andre Young
Fernando Pessoa
Eduardo Queiroz
Dynamic Real-Time Optimization of Microgrids with Day-Ahead Commitments for External Power Exchange
103(6)
Michael Zachar
Prodromos Daoutidis
Methodology for preselecting heat-integrated mass allocation networks likely to be associated with cost efficient HEN
109(6)
Sami Ghazouani
Assaad Zoughaib
Solene Le Bourdiec
Computer-Aided Molecular Design by Combining Genetic Algorithms and COSMO-RS
115(6)
Jan Scheffczyk
Lorenz Fleitmann
Annett Schwarz
Andre Bardow
Kai Leonhard
Energy consumption maps for quaternary distillation sequences
121(6)
F.I. Gomez-Castro
N.E. Ramirez-Vallejo
J.G. Segovia-Hernandez
C. Gutierrez-Antonio
M. Errico
A. Briones-Ramirez
J. Sanchez-Aguilar
Energy integration of a hydrotreating process for the production of biojet fuel
127(6)
C. Gutierrez-Antonio
F.I. Gomez-Castro
A.G. Romero-Izquierdo
S. Hernandez
Mathematical Optimization of the Production of Fuel Pellets from Residual Biomass
133(6)
M.A. Mendez-Vazquez
F.I. Gomez-Castro
I.M. Ponce-Ortega
A.H. Serafin-Munoz
J.E. Santibanez-Aguilar
M.M. El-Halwagi
On Optimal Assignment of Cold Standby Components for Multi-Channel Safety Interlocks
139(6)
Yeremia Yehuda Lepar
Yu-Chih Wang
Chuei-Tin Chang
Optimising biomass-based energy supply chains for sustainable mobility
145(6)
Federico d'Amore
Fabrizio Bezzo
Estimation of membrane fouling parameters for concentrating lactose using nanofiltration
151(6)
A. Sharma
M. Jelemensya
R. Paulen
M. Fikar
Multi-Scale Modeling of Solid Electrolyte Interface Formation in Lithium-Ion Batteries
157(6)
Fridolin Roder
Richard D. Braatz
Ulrike Krewer
Automatic Model Reduction of Population Balance Models by Proper Orthogonal Decomposition
163(6)
Dmytro Khlopov
Michael Mangold
Parallel computing in multi-parametric programming
169(6)
Richard Oberdieck
Efstratios N. Pistikopoulos
Modelling of a Reactive Distillation in the production process of high purity Cyclohexanone to produce caprolactam
175(6)
David Lorenzo
Carlos Perez-Galvan
Cristian Triana
Aurora Santos
Arturo Romero
I. David
L. Bogle
Multimodal Green Food Supply Chain Design and Planning under Uncertainty
181(6)
Ana Carla Gomes
Tonia Pinto-Varela
Ana Paula Barbosa-Povoa
Derivative-Free Chemical Process Synthesis by Memetic Algorithms Coupled to Aspen Plus Process Models
187(6)
Maren Urselmann
Tim Janus
Christophe Foussette
Stephen Tlatlik
Axel Gottschalk
Michael T.M. Emmerich
Thomas Back
S. Engell
Price Adjustment in Price-based Coordination Using Quadratic Approximation
193(6)
S. Wenzel
R. Paulen
S. Kramer
B. Beisheim
S. Engell
Is Wood Waste Only for Burning? A Methodology for Best Pathway Identification of Waste Recovery
199(6)
Gisele Abi Chahla
Assaad Zoughaib
Cong-Toan Tran
Romain Farel
A new scheme for process simulation by optimization: distillation as an example
205(6)
Anna Hoffmann
Michael Bortz
Jakob Burger
Hans Hasse
Karl-Heinz Kufer
Renewable electricity integration at a regional level: Cantabria case study
211(6)
Antonio Dominguez-Ramos
Charalampos Triantafyllidis
Sheila Samsatli
Nilay Shah
Angel Irabien
Multi-Stage Adaptive Robust Optimization over Bioconversion Product and Process Networks with Uncertain Feedstock Price and Biofuel Demand
217(6)
Daniel J. Garcia
Jian Gong
Fengqi You
Cost-based analysis about a newly designed two-staged reverse osmosis process with draw solute
223(6)
Kiho Park
Do Yeon Kim
Dae Ryook Yang
Chemical Looping Reforming: Impact on the Performances Due to Carbon Fouling on Catalyst
229(6)
Giuseppe Diglio
Piero Bareschino
Erasmo Mancusi
Francesco Pepe
Targeting the hydrogen network and optimal feed using rigorous simulation
235(6)
Wang Dai
Guilian Liu
Jingjing Liang
Incorporating life cycle assessment indicators into optimal electric vehicle charging strategies: An integrated modelling approach
241(6)
Gonzalo Bustos
Miao Guo
Koen H. van Dam
Salvador Acha
Nilay Shah
Neural Networks Modeling of Dearomatization of Distillate Cuts with Furfural to Produce Lubricants
247(6)
Kese P.F. Alberton
Anie D. Lima
Wlamir S. Nogueira
Luis C.Gomes
Priamo A. Melo
Argimiro R. Secchi
Mauricio B. de Souza Jr
Lignocellulosic supply chain MILP model: a Hungarian case study
253(6)
Anna Panteli
Sara Giarola
Nilay Shah
A framework for modelling investment decisions in gas infrastructures
259(6)
Sara Giarola
Daniel J.G. Crow
Adam Hawkes
Process Design and Integration of Various Carbon Capture Approaches into the Energy Sector and Other Energy-intensive Industrial Applications
265(6)
Calin-Cristian Cormos
Letitia Petrescu
Ana-Maria Cormos
Serban Agachi
Assessment of chemical looping combustion process by dynamic simulation
271(6)
Ana-Maria Cormos
Dora-Andreea Chisalita
Comparison of Different Heat Exchanger Tube Designs used in Latent Heat Thermal Energy Storage Systems - a Numerical Study
277(6)
Martin Koller
Anton Beck
Heimo Walter
Michael Hameter
Global sensitivity analysis of computer-aided molecular design problem for the development of novel working fluids for power cycles
283(6)
Jerome Frutiger
Jens Abildskov
Gikkan Sin
Minimizing the complexity of surrogate models for optimization
289(6)
Julian Straus
Sigurd Skogestad
Optimization Methods for Catalyst Design
295(6)
Jeffrey A. Herron
Manos Mavrikakis
Christos T. Maravelias
Model-based framework for enhanced and controlled operation of a fed-batch bioreactor: xylitol production
301(6)
Hector Hernandez-Escoto
Oscar Andres Prado-Rubio
Ricardo Morales-Rodriguez
Dynamic behavior of a multi-tasking reactive distillation column for production of silane, dichlorosilane and monochlorosilane
307(6)
C. Ramirez-Marquez
J.G. Segovia-Hernandez
N. Ramirez-Corona
J.A. Cervantes-Jauregui
Arturo Jimenez-Gutierrez
Use of predictor corrector methods for multi-objective optimization of dynamic systems
313(6)
Tobias Kebler
Filip Logist
Michael Mangold
Economic risk-based analysis: Effect of technical and market price uncertainties on the production of glycerol-based isobutanol
319(6)
Carina L. Gargalo
Krist V. Gernaey
Gurkan Sin
Synthesis and Optimization of Microalgae Biorefineries
325(6)
Melina Psycho
Antonis C. Kokossis
Testing the Non-Diagonal Quadratic Convex Reformulation Technique
331(6)
Otto Nissfolk
Ray Porn
Tapio Westerlund
Development of soft sensor with neural network and nonlinear variable selection for crude distillation unit process
337(6)
Kai Sun
Shao-hsuan Huang
Shi-Shang Jang
David Shan-Hill Wong
Modelling of organophilic pervaporation to compete with distillation
343(6)
Andras Jozsef Toth
Anita Andre
Eniko Haaz
Peter Mizsey
Optimal regional resource utilisation - the St. Margarethen case
349(6)
Stephan Maier
Raphaela H. Maier
Christina M. Pfeifer
Michael Narodoslawsky
Mathematical Programming Approach for the Design of Intensified Thermally Coupled Distillation Sequences
355(6)
Jose A. Caballero
Juan A. Reyes-Labarta
Discrete-Time MIP Methods for Production Scheduling in Multistage Facilities
361(6)
Andres F. Merchan
Hojae Lee
Christos T. Maravelias
Economic, Environmental and Dynamic Optimization Applied to Hybrid Processes for the Purification of Biobutanol
367(6)
E. Sanchez-Ramirez
J.J. Quiroz-Ramirez
S. Hernandez
J.G. Segovia-Hernandez
Purification of Bioethanol from a Fermentation Process: Alternatives for Dehydration
373(6)
Carolina Conde-Mejia
Arturo Jimenez-Gutierrez
Fernando Israel Gomez-Castro
Optimization of OSN Membrane Cascades for Separating Organic Mixtures
379(6)
Vincentius S.K. Adi
Marcus Cook
Ludmila G. Peeva
Andrew G. Livingston
Benoit Chachuat
On a systems approach to support novelty in bioreactor design
385(6)
Georgios P. Panayiotou
Aikaterini D. Mountraki
Antonis C. Kokossis
Comparison of Continuous-Time Models for Adjustable Robust Optimization in Process Scheduling under Uncertainty
391(6)
Nikos H. Lappas
Chrysanthos E. Gounaris
Developing a Soft Sensor with Online Variable Selection for Industrial Multi-mode Processes
397(6)
Jialin Liu
Shi-Shang Jang
David Shan-Hill Wong
CFD Modelling of Bubbly Gas Flow using Coupled OPOSPM-Two-Fluid Model
403(6)
Menwer Attarakih
Abdelmalek Hasseine
Hans-Jorg Bart
Design and control of azeotropic dividing wall column for separating furfural-water mixture
409(6)
Xing Qian
Shengkun Jia
Sigurd Skogestad
Xigang Yuan
Multiobjective Optimization of Membrane Networks for Fractionation of Protein Hydrolysate from Fish By-Products
415(6)
Ricardo Abejon
Azucena Abejon
Marie P. Belleville
Jose Sanchez-Marcano
Aurora Garea
Angel Irabien
Optimization and Monte Carlo Simulation for Product Launch Planning under Uncertainty
421(6)
Catarina M. Marques
Samuel Moniz
Jorge Pinho de Sousa
Ana Paul Barbosa-Povoa
Population Balance Modelling of Liquid Extraction Columns using the Sectional Quadrature Method of Moments (SQMOM)
427(6)
Samer Alzyod
Menwer Attarakih
Abdelmalek Hasseine
Hans-Jorg Bart
Robust multi-objective optimal control of dynamic biological networks
433(6)
Philippe Nimmegeers
Dries Telen
Mickey Beetens
Filip Logist
Jan Van Impe
Influence of the Mushy Zone Constant on the Numerical Simulation of the Melting and Solidification Process of Phase Change Materials
439(6)
Michael Hameter
Heimo Walter
CFD Simulation of Boiling Flows for Nuclear Reactor Thermal Hydraulic Applications
445(6)
Marco Colombo
Michael Fairweather
Group - Interaction Contribution Approach for Prediction of Electrochemical Properties of Ionic Liquids
451(6)
Khadra Mokadem
Mourad Korichi
Whole-Systems Modelling of Alternatives for Future Domestic Transport
457(6)
Sheila Samsatli
Alfredo Ramos
Mark Matchett
Nigel P. Brandon
Nilay Shah
Nouri J. Samsatli
Multi-scale modelling software framework facilitating simulation of interconnected scales using surrogatemodels
463(6)
Sigve Karolius
Heinz A. Preisig
Henrik Rusche
Reliable Energy Systems Design for Continuous Processes incorporating Renewables Generation
469(6)
Oluwamayowa O. Amusat
Paul R. Shearing
Eric S. Fraga
Dynamic impact milling model with a particle-scale breakage kernel
475(6)
Qinglin Su
Serena Schiano
Chuan-Yu Wu
Zoltan K. Nagy
Chris D. Rielly
Projection-based Reformulation and Decomposition Algorithm for A Class of Mixed-Integer Bilevel Linear Programs
481(6)
Dajiin Yue
Fengqi You
Mass and energy integration for the supercritical process for biodiesel production and a bioethanol dehydration train
487(6)
Fernando I. Gomez-Castro
Claudia Gutierrez-Antonio
Araceli Guadalupe Romero-Izquiero
Ricardo Morales-Rodriguez
Juan Gabriel Segovia-Hernandez
Convex Model for Global Optimization of Water Distribution System
493(6)
Yingzong Liang
Ergys Pahija
Chi Wai Hui
Multi-level Modelling of Sustainable Chemical Production: from CFD to LCA
499(6)
Pratham Arora
Andrew Hoadley
Sanjay Mahajani
Anuradda Ganesh
Modeling and simulation of phase change and nonideality in multistream heat exchangers
505(6)
Harry A.J. Watson
Donghoi Kim
Truls Gundersen
Paul I. Barton
Using Transient Measurements in Iterative Steady-State Optimizing Control
511(6)
Weihua Gao
Sebastian Engell
Computationally Efficient Steady-State Process Simulation by Applying a Simultaneous Dynamic Method
517(6)
Alexander Zinser
Liisa Rihko-Struckmann
Kai Sundmacher
Spatial branch and bound algorithm for the global optimization of MIQCPs
523(6)
Pedro M. Castro
Risk Management of Shale Gas Supply Chain under Estimated Ultimate Recovery Uncertainty
529(6)
Jiyao Gao
Fengqi You
Optimal Design and Synthesis of Shale Gas Processing and NGL Recovery Processes
535(6)
Jian Gong
Fengqi You
A Leader-Follower Game-Based Life Cycle Optimization Framework and Application
541(6)
Jiyao Gao
Fengqi You
Adjustable Robust Optimization for Scheduling of Batch Processes under Uncertainty
547(6)
Hanyu Shi
Fengqi You
Effective Sampling, Modeling and Optimization of Constrained Black-box Problems
553(6)
Ishan Bajaj
M.M. Faruque Hasan
Integration of Energy-cost Optimization and Production Scheduling Using Multiparametric Programming
559(6)
Hubert Hadera
Rachid Labrik
Juha Meintysaari
Guido Sand
Tiro Harjunkoski
Sebastian Engell
Simulation and optimization of the molecular weight distribution in a non-ideal polymerization reactor
565(6)
Chi Zhang
Xi Chen
Zhijiang Shao
Chaozhong Xu
Jiajun Wang
Efficient optimization-based design of energetically intensified distillation processes
571(6)
Thomas Waltermann
Mirko Skiborowski
Anaerobic Bio-reactor Modeling
577(6)
Cansu Birgen
Heinz A. Preisig
Alexander Wentzel
Sidsel Markussen
Bernd Wittgens
Ujjaini Sarkar
Anindita Ganguly
Sudeshna Saha
Sibashish Baksi
Effects of Bioethanol Pretreatments on the Broth Concentration and its Impacts in the Optimal Design of Product Separation and Purification Processes
583(6)
Andre R.G. da Silva
Carlo E.T. Ortega
Ben-Guang Rong
Bio-syngas Conversion by FT Synthesis with High Loaded Fe-based Catalysts: Kinetic Parameters Regression
589(6)
Alberto Comazzi
Federico Galli
Marco Galimberti
Flavio Manenti
Claudia L.M. Bianchi
Carlo Pirola
Design of a Multiproduct Lignocellulosic Biorefinery through the Process Modelling of a Feasible Superstructure
595(6)
Segolene Belletante
Ludovic Montastruc
Stephane Negny
Serge Domenech
A Framework for Integrated Scheduling and Control using Discrete-Time Dynamic Process Models
601(6)
Cara R. Touretzky
Tiro Harjunkoski
Michael Baldea
A model-based investigation of genetically modified microalgae strains
607(6)
Andrea Bernardi
Andrea Meneghesso
Tomas Morosinotto
Fabrizio Bezzo
Inclusion of thermodynamic equations for efficient steadystate process optimization
613(6)
Adriana Reyes-Lua
Marie Solvik
Sigurd Skogestad
Application of a Knowledge Management System to a Dropwise Additive Manufacturing System for Pharmaceuticals
619(6)
Ekin Icten
Girish S. Joglekar
Arun Giridhar
Gintaras V. Reklaitis
Multiscale Simulation of Bubbly Flows
625(6)
Kenneth S. Asiagbe
Michael Fairweather
Derrick O. Njobuenwu
Marco Colombo
Smart Adaptive Sampling for Surrogate Modelling
631(6)
Sushant S. Garud
Ifiekhar A. Karimi
Markus Kraft
Novel plant-wide process design of dichlorohydrin production by glycerol hydrochlorination
637(6)
San-fang Wang
Siao-Han Huang
David Shan-Hill Wong
Shi-Shang Jang
Optimization of dynamic systems with rigorous path constraint satisfaction
643(6)
Johannes M.M. Faust
Jun Fu
Benoit Chachuat
Alexander Mitsos
Green Approaches to Extract Astaxanthin from Shrimp Waste: Process Design and Economic Evaluation
649(6)
Behnaz Razi Parjikolaei
Massimiliano Errico
Rime Bahij El-Houri
Knud Villy Christensen
Xavier C. Frette
Synthesis and Design Strategies of Interplant Water Networks using Water Mains with Quality Specifications
655(6)
Sabla Y. Alnouri
Patrick Linke
Sumit Kr. Bishnu
Mahmoud
M. El-Halwagi
Inventory Management during Startup Operations of the Benchmark Chemical Plant
661(6)
Hiroya Seki
Conceptual reactive crystallization process design for separation and purification of phosphorus from complex sludge ash
667(6)
Yi Liu
Haiyan Qu
Ben-Guang Rong
Modelling and Optimal Control of Non-Viral siRNA Delivery
673(6)
Elnaz Jamili
Vivek Dua
Process retrofit for energy-use improvement of an absorption and stabilization process in refineries
679(6)
X.G. Liu
C.C. He
J.J. Chen
C. He
B.J. Zhang
Q.L. Chen
A Generic Methodology for Superstructure Optimization of Different Processing Networks
685(6)
Maria-Ona Bertran
Rebecca Frauzem
Lei Zhang
Rafiqul Gani
A Reformulation Strategy for Deterministic Global Optimization of Ideal Multi-component Distillation Processes
691(6)
Nick Mertens
Christian Kunde
Achim Kienle
Dennis Michaels
Synthesis of Intensified Processes from a Superstructure of Phenomena Building Blocks
697(6)
Hanns Kuhlmann
Mirko Skiborowski
A hierarchical coordination approach to the optimal operation of a sugar crystallization process
703(6)
Fawad Shamim
Reinaldo Hernandez
Radoslav Paulen
Sebastian Engell
Forest Supply Chain Optimization applying Generalized Disjunctive Programming
709(6)
Maria Analia Rodriguez
Noelia Alasino
Aldo Vecchietti
Integrated Transhipment Models for Synchronous Screening of Treatment Technologies and Targeting of Fresh Water and Recycle Flows
715(6)
Athanassios Nikolakopoulos
Dimitrios Faskiotis
Antonis Kokossis
Levelised Value of Electricity - A Systemic Approach to Technology Valuation
721(6)
Clara F. Heuberger
Iain Staffell
Nilay Shah
Niall MacDowell
Intensified Separation Processes for the Recovery and Dehydration of Bioethanol from an Actual Lignocellulosic Fermentation Broth
727(6)
Carlo-Edgar Torres-Ortega
Ben-Guang Rong
A Holistic Approach to Model Discovery Using A Domain Ontology
733(6)
Linsey Koo
Nikolaos Trokanas
Hella Tokos
Franjo Cecelja
Design of a chemical batch plant: a study of dedicated parallel lines with intermediate storage and the plant performance
739(6)
Floor Verbiest
Trijntje Cornelissens
Johan Springael
Multi-Product Reactive Distillation for Silanes Production
745(6)
Nancy Medina-Herrera
Salvador Tututi-Avila
Juan G. Segovia-Hernandez
Arturo Jimenez-Gutierrez
Optimization of Energy Consumption in a Hydrotreating Process for Green Diesel Production from Palm Oil
751(6)
Paisan Kittisupakorn
Suwisa Sae-ueng
Ajaree Suwatthikul
Optimal dynamic experiment design for guaranteed parameter estimation
757(6)
Anwesh Reddy
Gottu Mukkula
Radoslav Paulen
Short-term crude mix and operating conditions optimization for oil refinery operations
763(6)
Pedro Castillo Castillo
Pedro M. Castro
Gang Fu
Vladimir Mahalec
Robust Fault Isolation using Stable Principal Component Pursuit
769(6)
Zhengbing Yan
Yuan Yao
Zhengjiang Zhang
An integrated process of coke-oven gas tri-reforming and coal to methanol with high carbon utilization and energy efficiency
775(6)
Yi Man
Siyu Yang
Yu Qian
A General Representation for the Modeling of Energy Supply Chains
781(6)
Magdalini A. Kalaitzidou
Michael C. Georgiadis
Georgios M. Kopanos
Taylor-Made Modeling and Solution of Novel Process Units by Modular CAPE-OPEN-based Flowsheeting
787(6)
Gregor Tolksdorf
Erik Esche
Jasper van Baten
Gunter Wozny
Time-series aggregation for synthesis of distributed energy supply systems by bounding error in operational expenditure
793(6)
Bjorn Bahl
Alexander Kumpel
Matthias Lampe
Andre Bardow
Automated Data Review in Secondary Pharmaceutical Manufacturing by Pattern Recognition Techniques
799(6)
Natascia Meneghetti
Pierantonio Facco
Fabrizio Bezzo
Chrismono Himawan
Simeone Zomer
Massimiliano Barolo
Optimization of a Hydrogen Supply Chain Network Design by Multi-Objective Genetic Algorithms
805(6)
Jesus Ochoa Robles
Sofia De-Leon Almaraz
Catherine Azzaro-Pantel
A Generic PAT Software Interface for On-Line Monitoring and Control of Chromatographic Separation Systems
811(6)
Anders Holmqvist
Anton Sellberg
Enhanced data envelopment analysis for sustainability assessment
817(6)
Angel Galan-Martin
Gonzalo Guillen-Gosalbez
Laurence Stamford
Adisa Azapagic
Long-term planning and retrofitting of supply and distribution chains with decaying performance
823(6)
Ana Somoza
Carlos Pozo
Gonzalo Guillen-Gosalbez
Moises Graells
Predictive Modelling of Phase-Transfer Catalyst Systems for Improved and Innovative Design
829(2)
Amata Anantpinijwatna
Sun Hyung Kim
Mauricio Sales-Cruz
Rafiqul Gani
Analysis of the Carbon Efficiency of a Hybrid XTL-CSP process
831(10)
Xinying Liu
Bilal Patel
Diane Hildebrandt
Sustainable Chemical Process Development through an Integrated Framework
841(6)
Emmanouil Papadakis
Anjan K. Tula
Amata Anantpinijwtna
Deenesh K. Babi
Rafiqul Gani
Optimization of Economic and Operability Performances of Water-gas Shift Membrane Reactor
847(6)
Shuey Z. Saw
Jobrun Nandong
Hybrid plant-wide Simulation and Modelling using Reference nets and Java
853(6)
Stefan Hubert
Darius Ruckert
Antonio Delgado
Extracting knowledge from historical databases for process monitoring using feature extraction and data clustering
859(6)
Michael C. Thomas
Jose Romagnoli
Investigating the energy-water-carbon nexus of mega-scale chemicals production from Appalachian shale gas
865(6)
Chang He
Fengqi You
A Multivariable Model Predictive Control Project in a Computer Aided Master's Degree Course
871(6)
Carla I.C. Pinheiro
A pinch analysis software tool for refinery hydrogen network management folio
877(6)
P. Marques
Henrique A. Matos
Nuno M.C. Oliveira
Clemente P. Nunes
Manuel Prego
Maria A. Guerreiro
Guilherme Goncalves
Modelling and optimization framework for the multi-objective design of buildings
883(6)
Joan Carreras
Carlos Pozo
Dieter Boer
Gonzalo Guillen-Gosalbez
Jose A. Caballero
Ruben Ruiz-Femenia
Laureano Jimenez
Modelling and Simulation of an Industrial Riser in Fluid Catalytic Cracking Process
889(6)
Y.M. John
R. Patel
I.M. Mujtaba
Optimal design and operation of semi-batch reactive distillation for methyl lactate synthesis with fixed product demand
895(6)
Dhia Y. Aqar
Nejat Rahmanian
Iqbal M. Mujtaba
Development of Shale Gas Supply Chain Network under Market Uncertainties
901(6)
Jorge Chebeir
Aryan Geraili
Jose Romagnoli
Development of Hybrid Fuzzy-GMC Control System for MSF Desalination Process
907(6)
Salih Alsadaie
Mohd Fauzi bin Zanil
Azlan Hussain
Iqbal M. Mujtaba
Supply Chain Optimisation of Nipa-based bioethanol industry in Thailand
913(6)
Remy Nguyen
Miao Guo
Charongpun Musikavong
Noparat Bamroongrugsa
Nilay Shah
Economic Evaluation of Hybrid FO-crystallization-RO Desalination Process
919(6)
Kiho Park
Do Yeon Kim
Dae Ryook Yang
Modelling and Analysis of a Soybean Biorefinery for the Production of Refined Oil, Biodiesel and Different Types of Flours
925(6)
Cristine De Pretto
Paulo Waldir Tardioli
Caliane Bastos Borba Costa
Disjunctive Models for Strategic Midstream Delivery Agreements in Shale Gas Development
931(6)
Markus G. Drouven
Ignacio E. Grossmann
Multiparametric Metamodels for Model Predictive Control of Chemical Processes
937(6)
Ahmed Shokry
Canan Dombayci
Antonio Espuna
Optimal Reuse of Flowback Wastewater in Shale Gas Fracking Operations Considering Economic and Safety Aspects
943(6)
L.F. Lira-Barragan
J. Martinez-Gomez
J.M. Ponce-Ortega
M. Serna-Gonzalez
M.M. El-Halwagi
Control relevant modelling for haemodialysis
949(6)
Thomas Eck
Vivek Dua
Dynamic Multi-Scenario Approach to Robust and Profitable Online Optimization & Optimal Control of Batch Processes
955(6)
Francesco Rossi
Gintaras Reklaitis
Guido Buzzi-Ferraris
Flavio Manenti
Merging information from batch and continuous flow experiments for the identification of kinetic models of benzyl alcohol oxidation over Au-Pd catalyst
961(6)
Federico Galvanin
Noor Al-Rifai
Enhong Cao
Meenakshisundaram Sankar
Graham Hutchings
Asterios Gavriilidis
Vivek Dua
Multi-period Sequential Synthesis of Heat Exchanger Networks and Utility Systems including storages
967(6)
Alberto Mian
Emanuele Martelli
Francois Marechal
Simplification of Equation-Oriented Models through the Digraph Method
973(6)
Fei Zhao
Xi Chen
Lingyu Zhu
Enhanced Down-Stream Processing of Biobutanol in the ABE Fermentation Process
979(6)
Costin S. Bildea
Iulion Patraccu
J.G. Segovia Hernandez
Anton. A. Kiss
Enhanced Process for Methanol Production by CO2 Hydrogenation
985(6)
Anton. A. Kiss
J.J. Pragt
H.J. Vos
G. Bargeman
M.T. de Groot
Novel Process for Conversion of CO2 to Dimethyl Carbonate using Catalytic Membrane Reactors
991(6)
H.J. Kuenen
H.J. Mengers
A.G.J. van der Ham
Anton A. Kiss
Conceptual Design for the Separation of a Mixture of Isoamyl Acetate and Isoamyl Alcohol
997(6)
Oscar D. Rojas
Andres Salazar
Ivan D. Gil
Gerardo Rodigueza
A New Methodology to Reduce the Exergy Loss of Distillation Columns Using Rigorous Process Simulation
1003(6)
Lucas Bonfim Rocha
Marcelino Luiz Gimenes
Sergio Faria
Laureano Jimenez
Thiago Cavali
Global Optimization for a Continuous Location-Allocation Model for Centralized and Distributed Manufacturing
1009(6)
Cristiana L. Lara
Ignacio E. Grossmann
Towards a sustainable hydrogen economy: role of carbon price for achieving GHG emission targets
1015(6)
Marta Moreno-Benito
Paolo Agnolucci
Will McDowall
Lazaros G. Papageorgiou
An Optimal Scheduling of the Heliostat Field in a Solar Tower Power Plant
1021(6)
Qian Zhao
Yuhong Zhao
Systematic Solvent Evaluation for Artemisinin Recovery in Continuous Pharmaceutical Manufacturing
1027(6)
Hikaru G. Jolliffe
Dimitrios I. Gerogiorgis
Multi-objective Optimisation of Flavour and Processing Time in Beer Fermentation via Dynamic Simulation
1033(6)
Alistair D. Rodman
Dimitrios I. Gerogiorgis
First-principles Rheological Modelling and Parameter Estimation for Nanoparticle-based Smart Drilling Fluids
1039(6)
Simon I. Reilly
Zisis Vryzas
Vassilios C. Kelessidis
Dimitrios I. Gerogiorgis
Multi-parametric Statistical Analysis of Economic Data for Continuous Pharmaceutical Manufacturing
1045(6)
Brigitta Nagy
Gyorgy Marosi
Dimitrios I. Gerogiorgis
Bayesian Optimization with Dimension Scheduling: Application to Biological Systems
1051(6)
Doniyor Ulmasov
Caroline Baroukh
Benoit Chachuat
Marc Peter Deisenroth
Ruth Misener
A framework for Simultaneous State Estimation and Robust Hybrid Model Predictive Control in Intravenous Anaesthesia
1057(6)
Ioana Naxu
Richard Oberdieck
Efstratios N. Pistikopoulos
Synthesis of Heat Exchangers Network (HEN) and Optimization under Variability and Uncertainty
1063(6)
Faysal Al Khulaifi
Eid Al Mutairi
Coupled Thermo-Mechanical-Chemical modelling of underground coal gasification
1069(6)
E. Andrianopoulos
A. Korre
S. Durucan
S. Franzsen
An integrated unit commitment model incorporating electric vehicles as a flexible and responsive load
1075(6)
Nikolaos E. Koltsaklis
Michael C. Georgiadis
Sustainable DME synthesis-design with CO2 utilization
1081(6)
Weeranut Prasertsri
Rebecca Frauzem
Uthaiporn Suriyapraphadilok
Rafiqul Gani
Ontology construction for multi-network models
1087(6)
Heinz A. Preisig
Arne Tobias Elve
Phenomena Based Process Intensification of Toluene Methylation for Sustainable Para-xylene Production
1093(6)
Nateetorn Anantasarn
Deenesh K. Babi
Uthaiporn Suriyapraphadilok
Rafiqul Gani
Optimal Planning of Distributed Systems of Refineries and Biorefineries Considering Pollution Trading with Forest Plantations
1099(6)
A.F. Sanchez Bautista
J.E. Santibanez-Aguilar
F. You
J.M. Ponce-Ortega
Incremental Learning Fault Detection Algorithm Based on Hyperplane-Distance
1105(6)
Mohammadhamed Ardakani
Gerard Escudero
Moises Graells
Antonio Espuna
Optimal Features Selection for Designing a Fault Diagnosis System
1111(6)
Mohammadhamed Ardakani
Mandieh Askarian
Ahmed Shokry
Gerard Escudero
Moises Graells
Antonio Espuna
Reverse Design of Ionic Liquids for the Absorption of CO2
1117(6)
Sarah E. Davis
Robert H. Herring III
Mario R. Eden
Conceptual Design of an Oil Shale Retorting Process Integrated with Chemical Looping for Hydrogen production
1123(6)
Qingchun Yang
Yu Qian
Siyu Yang
First Steps towards Online Optimal Control of Molecular Weight in Batch and Semi-batch Free-Radical Polymerization Reactors
1129(6)
N. Ghadipasha
A. Geraili
J.A. Romagnoli
C. Castor
W.F. Reed
Dynamic Simulation and Optimisation of an Industrial Process for Tributyl Citrate Production
1135(6)
Juan D. Fonseca
Abderrazak M. Latifi
Alvaro Orjuela
Ivan D. Gil
Gerardo Rodriguez
Mid-term Scheduling Model Based on State-Task-Network for Considering Plant Specific Constraints in Pharmaceutical Manufacturing
1141(6)
Gioele Casola
Lukas Gallus Eberle
Christian Siegmund
Markus Mattern
Hirokazu Sugiyama
Optimal Operating Condition of Fluidized Bed Propellant Incinerator Considering Fluidization Effect and Reaction of the Particles
1147(6)
Sunghyun Cho
Chanho Park
Min Oh
Jungsu Park
Hyunsoo Kim
Il Moon
A Comprehensive Kinetic Investigation of the Ring Opening of L,L-Lactide in the Presence of Multifunctional Polyalcohols
1153(6)
Prokopios Pladis
Konstantina Karidi
Dimitrios Meimaroglou
Costas Kiparissides
Modelling and optimization of an activated sludge wastewater treatment process
1159(6)
Ioana Naccu
Ioan NaKu
Set-valued integration of uncertain dynamic systems with sensitivity analysis capability
1165(6)
Nikola D. Perie
Mario E. Villanueva
Benoit Chachuat
Using PLS and NIR spectra to model the first-breakage step of a grain milling process
1171(6)
Filippo Dal-Pastro
Pierantonio Facco
Fabrizio Bezzo
Eliana Zamprogna
Massimiliano Barolo
Optimal design of water exchanges in eco-industrial parks through a game theory approach
1177(6)
Manuel Ramos
Marianne Boix
Didier Aussel
Ludovic Montastruc
Serge Domenech
Off-line optimisation and control of carbon capture operations
1183(6)
Norhuda Abdul Manaf
Abdul Qadir
Ali Abbas
A new paradigm in process synthesis focus on design of power plants and industrial processes integrated with CO2 capture
1189(6)
Rahul Anantharaman
Truls Gundersen
Enabling Sulfur-rich Coal Sources for Gasification without Emissions
1195(6)
Andrea Bassani
Eva Marie Speelmanns
Eliseo Ranzi
Flavio Manenti
Automated process flowsheet synthesis for membrane processes using genetic algorithm: role of crossover operators
1201(6)
Alireza Shafiee
Mobin Arab
Zhiping Lai
Zongwen Liu
Ali Abbas
Natural gas liquids (NGL) recovery in the liquefied natural gas production
1207(6)
Mengyu Wang
Ali Abbas
Part B
Efficient simulation of heterogeneity and stochasticity in microbial processes
1213(6)
Dennis Pischel
Robert J. Flassig
Kai Sundmacher
Ionic Liquids Role in Multifeedstock/Multiproduct Integrated Biorefineries
1219(6)
Manuel Rodriguez
Ismael Diaz
Quantifying the importance of flow maldistribution in numbered-up microreactors
1225(6)
David Fernandes del Pozo
Timothy Van Daele
Daan Van Hauwermeiren
Krist V. Gernaey
Ingmar Nopens
Modeling, Simulation and Economic Evaluation of a Hybrid CO2 Capture Process for Oxidative Coupling of Methane
1231(6)
Alberto Penteado
Erik Esche
Robert Wilhelm
Hamid Godini
Daniel Salerno
Gregor Tolksdorf
Victor Alejandro Merchan
Gunter Wozny
An Enhanced Group-Interaction Contribution Method for the Prediction of Normal Boiling and Critical points
1237(6)
Khaled Mansour
Mourad Korichi
Framework for optimization and scheduling of a copper production plant
1243(6)
Olli Suominen
Ville Morsky
Risto Ritala
Matti Vilkko
Systematic, efficient and consistent LCA calculations for chemical and biochemical processes
1249(6)
Kaesinee Petchkaewkul
Pomthong Malakul
Rafiqul Gani
Modelling and optimization of compact subsea liquid-liquid separation system
1255(6)
Tamal Das
Preben Furst Tyvold
Johannes Jaschke
Optimization of an acrolein production process in a pilot-scale fixed-bed reactor
1261(6)
M. Lei
F. Lesage
M.A. Latifi
S. Tretjak
Implementation of hybrid DEM-PBM approach to reduce the computational cost of powder mixing modeling
1267(8)
Ashutosh Tamrakar
Subhodh Karkala
Daniel Schankel
Rohit Ramachandran
Influence of mill characteristics on stability of continuous layering granulation with external product classification
1275(6)
Christoph Neugebauer
Stefan Palis
Andreas Buck
Eugen Diez
Stefan Heinrich
Evangelos Tsotsas
Achim Kienle
Model Based Engineering of Process Plants using SysML
1281(6)
Carlos Hernandez
Manuel Rodriguez
Ismael Diaz
Ricardo Sanz
Modelling and simulation of a U-loop Reactor for Single Cell Protein Production
1287(6)
Mengzhe Wu
Jakob Kjobsted Huusom
Krist V. Gernaey
Ulrich Kruhne
Global Optimization of Gasoline Blending Model using Bound Contraction Technique
1293(6)
Yolada Ounahasaree
Uthaiporn Suriyapraphadilok
Miguel Bagajewicz
Fuzzy Control of a Distillation Column
1299(6)
Anna Vasickaninova
Monika Bakosova
Alajos Meszaros
A Novel Approach to Include Limited Equipment Connectivity in State-Task Network Models
1305(6)
Mikael Nyberg
Mechanistic Models for Process Development and Optimization of Fed-batch Fermentation Systems
1311(6)
Lisa Mears
Stuart M. Stocks
Mads O. Albaek
Gurkan Sin
Krist V. Gernaey
Optimization of Lignocellulosic Waste Biorefinery using Multi-Actor Multi-Objective Mathematical Framework
1317(6)
Muhammad T. Ashraf
Ana I. Torres
Iwona Cybulska
Chuanji Fang
Mette H. Thomsen
Jens E. Schmidt
George Stephanopoulos
Design and economic analysis of 1,2-propanediol derived from Crude glycerol
1323(6)
Paweena Thammarat
Ampira Charoensaeng
Uthaiporn Suriyapraphadilok
Control of an Extractive Distillation Column with Thermal Integration
1329(6)
W.B. Ramos
M.F. Figueiredo
K.D. Brito
R.P. Brito
One-stage approach for the integrated design of ORC processes and working fluid using PC-SAFT
1335(6)
Johannes Schilling
Matthias Lampe
Joachim Gross
Andre Bardow
Optimization of Aeration Power in a SBR
1341(6)
Jimena Ferreira
Adrian Ferrari
Soledad Gutierrez
Argimiro R. Secchi
Process and Economic Optimisation of a Milk Processing Plant with Solar Thermal Energy
1347(6)
Fabian Buhler
Tuong-Van Nguyen
Brian Elmegaard
Anish Modi
An intelligent decision making and notification system based on a knowledge-enabled supervisory monitoring platform
1353(6)
Chrysovalantou Ziogou
Stelios Krinidis
Dimosthenis Ioannidis
Simira Papadopoulou
Dimitrios Tzovaras
Spyros Voutetakis
Integrated design and operation assessment of an embedded supervisory automation framework for a hybrid hydrogen-enabled power generation system
1359(6)
Chrysovalantou Ziogou
Damian Giaouris
Simira Papadopoulou
Spyros Voutetakis
Design and Comparison of Optimal Reactor Concepts for the Hydroformylation of Olefins by Use of a Probabilistic Design Framework
1365(6)
Nicolas M. Kaiser
Robert J. Flassig
Kai Sundmacher
Wastewater Quality Impact on Water Management in Shale Gas Supply Chain
1371(6)
Omar J. Guerra
Andres J. Calderon
Lazaros G. Papageorgiou
Gintaras V. Reklaitis
Imputation of Missing Data with Ordinary Kriging for Enhancing Fault Detection and Diagnosis
1377(6)
Mohammadhamed Ardakani
Ahmed Shokry
Ghazal Saki
Gerard Escudero
Moises Graells
Antonio Espuila
Economically optimal multi-actor processing networks: material flows and price assignment of the intermediates using Lagrangian decomposition
1383(6)
Ana I. Torres
Tomasz Bochenski
Jens E. Schmidt
George Stephanopoulos
Population Balance Applied to Microalgae Growth
1389(6)
Ergys Pahija
Yingzong Liang
Chi Wai Hui
Ammonia supply chains: A new framework for renewable generation with a case study for Minnesota
1395(6)
W. Andrew Allman
Prodromos Daoutidis
Analysis of Operational Heat Exchanger Network Robustness via Interval Arithmetic
1401(6)
P. Floquet
Gilles Hetreux
Raphaele Hetreux
Lucille Payet
Effect of Solvent Feeding Time on the Start-up Operation of an Extractive Distillation Column
1407(6)
Icaro Caze Nunes
Marcella Feitosa de Figueiredo
Karoline Dantas Brito
Romildo Pereira Brito
Geometry optimization of a fibrous scaffold based on mathematical modelling and CFD simulation of a dynamic cell culture
1413(6)
Tannaz Tajsoleiman
Mohammad J. Abdekhodaie
Krist V. Gernaey
Ulrich Kruhne
Synthesis of preliminary system designs for offshore oil and gas production
1419(6)
Tuong-Van Nguyen
Gurkan Sin
Brian Elmegaard
Sugar extraction by moving-bed diffusers in ethanol production: development of a simulation tool
1425(6)
Victor C. Geraldo
Edvaldo R. de Morais
Eduardo C.V. de Toledo
Charles D. Jesus
Antonio Bonomi
Rubens M. Filho
Optimal Design of an Integrated Radiant Syngas Cooler and Steam Methane Reformer using NLP and Meta-heuristic Algorithms
1431(6)
Jaffer H. Ghouse
Thomas A. Adams II
Conceptual process design for Boric Acid: A case study for engineering education
1437(6)
Sebastian Herrera
Constanza Cruz
Yendery Ramirez
Luis Cisternas
Global Sensitivity Analysis of Reverse Osmosis Processes
1443(6)
Freddy Lucay
Luis A. Cisternas
Edelmira D. Galvez
Synthesis of Heat Exchanger Networks and Utility Systems: sequential initialization procedure and simultaneous MINLP algorithm
1449(6)
Emanuele Martelli
Cristina Elsido
Alberto Mian
Francois Marechal
Mathematical Modelling-based Energy System Operation Strategy considering Energy Storage Systems
1455(6)
Jun-Hyung Ryu
Bri-Mathias Hodge
Mineral Concentration Plants Design Using Rigorous Models
1461(6)
Luis A. Cisternas
Renato Acosta-Flores
Freddy Lucay
Edelmira D. Galvez
MO-MCS: An Efficient Multi-objective Optimization Algorithm for the Optimization of Temperature/Pressure Swing Adsorption Cycles
1467(6)
Lisa Joss
Federico Capra
Matteo Gazzani
Marco Mazzotti
Emanuele Martelli
A Systematic Framework for the Design and Implementation of Sensing and Control Architecture for a Continuous Pharmaceutical Manufacturing Plant
1473(6)
Ravendra Singh
Fernando J. Muzzio
Marianthi Ierapetritou
Rohit Ramachnadran
Equation-based Rigorous Modelling of the NOx Absorption Process: Model Development and Process Optimization
1479(6)
Ines L.S.B. Vilarinho
Nuno M.C. Oliveira
Belmiro P.M. Duarte
Susana E.F.M. Pereira
Moving-horizon State Estimation with Gross Error Detection for a Hydroformylation Mini-plant
1485(6)
Christian Hoffmann
Markus Illner
David Muller
Erik Esche
Gunter Wozny
Lorenz T. Biegler
Jens-Uwe Repke
Residential Microgrid Design Optimisation under Uncertain uCHP Characteristics
1491(6)
Carmen Wouters
Eric S. Fraga
Adrian M. James
Multi-Objective Optimisation in a Petrochemical Complex with LCA considerations
1497(6)
Antonio Gonzalez-Castatio
J. Alberto Bandoni
M. Soledad Diaz
NLP optimization for the design of sustainable wastewater treatment networks
1503(6)
Juan I. Padron-Paez
Oscar Andres Prado-Rubio
Ana Carvalho
Alicia Roman-Martinez
Design of sustainable municipal wastewater treatment plants
1509(6)
Juan I. Padron-Paez
Sofia De-Leon Almaraz
Alicia Roman-Martinez
Multi-objective optimization for the biotechnological conversion of lingocellulosic biomass to value-added products
1515(6)
Arturo Alvarez del Castillo-Romo
Ricardo Morales-Rodriguez
Alicia Roman-Martinez
Closed-Loop Identification of Nonlinear Hammerstein Model Based on Subspace Approach
1521(6)
Jyh-Cheng Jeng
Po-An Chen
Development of a Neural Network-based Renewable Energy Forecasting Framework for Process Industries
1527(6)
Soobin Lee
Jun-Hyung Ryu
Bri-Mathias Hodge
In-Beum Lee
Development of a model for identifying the optimal biogas system design in Sub-Saharan Africa
1533(6)
Gloria V. Rupf
Parisa A. Bahri
Karne de Boer
Mark P. McHenry
Dynamic Optimization of Desalination System Designs using Aspen Custom Modeler
1539(6)
Sidra N. Malik
Parisa A. Bahri
Linh T.T. Vu
Selection of an Energetically More Feasible Route for Hydrocarbon Extraction from Microalgae - Milking of B. braunii as a Case Study
1545(6)
Sofia Chaudry
Parisa A. Bahri
Navid R. Moheimani
Structure optimization of power-to-chemicals (P2C) networks by linear programming for the economic utilization of renewable surplus energy
1551(6)
Dominik Schack
Liisa Rihko-Struckmann
Kai Sundmacher
Comparison between Experimental and Simulated Data of a Distillation Column: Evaluation of Mass-Heat Balances and Trays Efficiency
1557(6)
Carlo Pirola
Using Dynamic Simulation for Risk Assessment: Application to an Exothermic Reaction
1563(6)
Fatine Berdouzi
Nelly Olivier-Mage
Nadine Gabas
Robust Optimization for Petroleum Supply Chain Collaborative Design and Planning
1569(6)
Leao J. Fernandes
Susana Relvas
Douglas Alem
Ana P. Barbosa-Povoa
Managing Uncertainty Information for Improved Data-Driven Modelling
1575(6)
Ricardo Rendall
Marco S. Reis
Swee-Teng Chin
Leo Chiang
A Predictive Model for Energy Metabolism and ATP Balance in Mammalian Cells: Towards the Energy-Based Optimization of mAb Production
1581(6)
Ana Quiroga Campano
Maria M. Papathanasiou
Efstratios N. Pistikopoulos
Athanasios Mantalaris
Prediction of the Solubility in Supercritical Carbon Dioxide: a Hybrid Thermodynamic/QSPR Approach
1587(6)
Pavel Gurikov
Igor Lebedev
Andrey Kolnoochenko
Natalia Menshutina
Distributed minimum batch time optimization for batch reactors with shared resources
1593(6)
Lukas Samuel Maxeiner
Sebastian Engell
Optimal Start-Up and Operation Policy for an Ultrafiltration Membrane Unit in Whey Separation
1599(6)
M. Bahadir Saltik
Leyla Ozkan
Marc Jacobs
Albert van der Padt
Convergence Order of McCormick Relaxations of LMTD function in Heat Exchanger Networks
1605(6)
Jaromil Najman
Alexander Mitsos
A new approach for pharmacokinetic model application towards personalized medicine
1611(6)
Roberto A. Abbiati
Valentina Depetri
Federico Scotti
Davide Manca
Structural and economic analysis of Industrial Symbiosis networks: a hybrid approach to assess investment opportunities
1617(6)
Georgios Lignos
Simone Stancari
Stelios Bikos
Antonis Kokossis
Modelling Reaction-Diffusion Dynamics in Microsystems
1623(6)
Ivan Pribec
Tomaz Urbic
Igor Plazl
An extended comparison study of large scale data-driven prediction methods based on variable selection, latent variables, penalized regression and machine learning
1629(6)
Ricardo Rendall
Ana Pereira
Marco Reis
Evaluation of the production of lipids for fuels and proteins from microalgae by decomposition of the processing network
1635(6)
Tomasz Bochenski
Ana I. Torres
M. Tahir Ashraf
Jens Ejbye Schmidt
George Stephanopoulos
Integrating Uncertainty into Urban Energy System Design
1641(6)
Jakob Rager
Stefano Moret
Matthias Pernet
Francois Marechal
Energy Supply Chain optimisation for capacity and investment planning
1647(6)
Christiana Papapostolou
Emilia Kondili
Ioannis K. Kaldellis
Optimal design of a styrene monomer plant under market volatility
1653(6)
Riccardo Barzaghi
Alberto Conte
Piernico Sepiacci
Davide Manca
Development of advanced computational tools for the intensification of monoclonal antibody production
1659(6)
Maria M. Papathanasiou
Ana Luz Quiroga-Campano
Richard Oberdieck
Athanasios Mantalaris
Efstratios N. Pistikopoulos
Computational tools for the advanced control of periodic processes - Application to a chromatographic separation
1665(6)
Maria M. Papathanasiou
Richard Oberdieck
Athanasios Mantalaris
Efstratios N. Pistikopoulos
Simulation, Optimization and Control of Heavy Oil Upgrading Processes: Application to a Delayed Coking Unit
1671(6)
Nadson M.N. Lima
Paula Sbaite
Cesar B. Batistella
Ruben Maciel Filho
Maria R. Wolf Maciel
Flavio Manenti
Marcelo Embirucu
Optimization of Batch Extractive Distillation with Off-cut Recycle and Varying Feed Composition
1677(6)
Laszlo Hegely
Peter Lang
Solvent Design for Post Combustion Chemical Absorption Process
1683(6)
Muhammad Zulhilmi Ahmad
Haslenda Hashim
Nor Alafiza Yunus
Material Flow Analysis (MFA) and Life Cycle Assessment (LCA) Study for Sustainable Management of PVC Wastes in Thailand
1689(6)
Suriyaphong Nakem
Jirawadee Pipatanatornkul
Seksan Papong
Thanakorn Rodcharoen
Manit Nithitanakul
Pomthong Malakul
Material Flow Analysis and Life Cycle Assessment Study for Sustainable Management of Wastes of Metropolitan Electricity Authority (MEA)
1695(6)
Ornmanee Yahom
Pomthong Malakul
Ampira Charoensaeng
Heat Exchanger Network Design with Fouling Effects
1701(6)
Sawanya Bamrungsab
Kitipat Siemanond
Simulation/Optimization of carbon dioxide capture plant: A case study of AGRU from Thailand
1707(6)
Wichuda Rachpitak
Kitipat Siemanond
Amr Henni
Rungroj Chunvaree
Biodiesel from Sunflower Oil: Development of Process Model via Lab scale Experiment and Optimisation
1713(6)
E. Mercuri
D. Manca
O. Abderazag
R. Patel
I.M. Mujtaba
Study of thermal efficiency in heavy oil reservoirs submitted to steam injection by using numerical simulation
1719(6)
Antonio. R. Gurgel
Anthony A.R. Diniz
Edson A. Arazijo
A.R. Diniz
M.S.B. Lima
Marcos. A.F. Rodrigues
Wison da Mata
Tarcilio. V. Dutra Jr
Application of a Multiple Time-Scale Rolling Horizon Optimization Technique for Improved Load-Following of an Integrated SOFC/CAES Plant with Zero Emissions
1725(6)
Jake Nease
Nina Monteiro
Thomas A. Adams II
A Microalgae-based Biorefinery Plant for the Production of Valuable Biochemicals: Design and Economics
1731(6)
Giannis Penloglou
Christos Chatzidoukas
Costas Kiparissides
Modeling and Simulation of Diffusion Process in Tissue Spheroids Encaged into Microscaffolds (Lockyballs)
1737(6)
Dernowsek J.A.
Rezende R.A.
Passamai V.E.
Noritomi P.Y.
Kemmoku D.T.
Nogueira J.A.
Lara V.F.
Vilalba F.A.
Mironov V.
da Silva J.V.L.
Analysis of the intermittency of the steam alternating solvent process (SAS) applied to a heavy oil reservoir
1743(6)
Davi M.S. de B. Lima
Edson A. Araajo
Anthony A.R. Diniz
Antonio. R. Gurgel
Wilson da Mata
Optimisation of Maintenance Planning into the Production of Biopharmaceuticals with Performance Decay using a Continuous-time Formulation
1749(6)
Miguel Vieira
Songsong Liu
Tania Pinto-Varela
Ana P. Barbosa-Povoa
Lazaros G. Papageorgiou
A Systematic Approach for the Hydrotreating of Biodiesel and Petroleum-Diesel Blends
1755(6)
Eduardo S. Perez-Cisneros
Mauricio Sales-Cruz
Alberto Ochoa-Tapia
Ricardo Lobo-Oehmichen
Tomas Viveros-Garcia
Optimal Power Sharing Control in Networked Fuel Cell Stacks Resmi Suresh MP
1761(6)
Ganesh Sankaran
Sreeram Joopudi
Suman Roy
Choudhury
Shankar Narasimhan
Raghunathan Rengaswamy
Appropriate placement of compressors and expanders in sub-ambient processes
1767
Chao Fu
Truls Gundersen
Bayesian treed Gaussian process method for process monitoring
1733(46)
Hangzhou Wang
Vinicius Veloso de Melo
Computational Experiments on Sampling Methods for Uncertainty Propagation and the Implications for Simulation-Based Optimization
1779(6)
Ismail Fahmi
Selen Cremaschi
Techno-Economic Evaluation of an Oxidative Coupling of Methane Process at Industrial Scale Production
1785(6)
D. Salerno
H.R. Godini
A. Penteado
E. Esche
G. Wozny
Minimum Reflux of Complex Distillation Columns: Adiabatic Flash Method on Enthalpy-Composition Diagram
1791(6)
Jose D. Olguin-Angeles
Arturo Ortiz-Arroyo
Angel Castro-Aguero
Design and Evaluation of a High-Density Energy Storage Route with CO2 Re-Use, Water Electrolysis and Methanol Synthesis
1797(6)
Gregoire Leonard
Davide Giulini
Diego Villarreal-Singer
Impact of protein co-production on techno-economic feasibility of microalgal biodiesel
1803(6)
Soumyajit Sen Gupta
Yogendra Shastri
Sharad Bhartiya
Heat Exchanger Network Synthesis using a Genetic Algorithms-Particle Swarm Optimization Hybrid Method and Parallel Processing
1809(6)
Leandro Pavuo
Mauro A.S.S. Ravagnani
FI2EPI - A freeware tool for performing Heat Integration based on Pinch Analysis
1815(6)
Pedro M. Pereira
Maria Cristina Fernandes
Henrique A. Matos
A Supercritical Reactive Separation Process to Obtain Biopesticides (phorbol-esters) in the Biodiesel Production from Jatropha curcas Oil
1821(6)
Eduardo S. Perez-Cisneros
Mauricio Sales-Cruz
Veronica Rodriguez-Lopez
Xenia Mena-Espino
Tomas Viveros-Garcia
Simultaneous Optimization and Integration of Gas Turbine and Air Separation Unit Using Novel Simplified Model
1827(6)
Maojian Wang
Chi-Wai Hui
Guilian Liu
Optimization of Preventive Maintenance Program for Imaging Equipment in Hospitals
1833(6)
Danahe Marmolejo-Correa
Rosa G. Juarez-Valdivia
Alejandra Rodriguez-Navarro
A Mixed Integer Programming Model for Sustainable Water Management in Macroscopic Systems
1839(6)
Jaime Garibay-Rodriguez
Vicente Rico-Ramirez
Jose Maria Ponce-Ortega
Process and Heat Integrated Design of a Novel NGL Recovery Scheme
1845(6)
Mohd Shariq Khan
L.A. Karimi
Computational Workflow Management in the context of Model-Based Design of Experiments
1851(6)
Sigve Karolius
Mandar N. Thombre
Heinz A. Preisig
Henrik Rusche
On the reduction of the overestimation in verified simulation by model reformulation
1857(6)
Carlos Perez-Galvan
L. David
L. Bogle
Improving the wastewater treatment plant performance through model predictive control strategies
1863(6)
Chiara Foscoliano
Stefania Del Vigo
Michela Mulas
Stefania Tronci
Heat exchanger network design with multi-stream exchangers using stage-wise superstructure
1869(6)
Chanud Boonsup
Kitipat Siemanond
Synthesis of Mass Exchange Networks Using Mathematical Programming and Detailed Cost functions
1875(6)
Adeniyi J. Isafiade
Michael Short
Zdravko Kravanja
Klaus Moller
Bifurcation analysis of process stability of continuous fluidized bed agglomeration with external product classification
1881(6)
A. Buck
M. Wegner
C. Neugebauer
S. Palis
E. Tsotsas
Improving proton exchange membrane efficiency of fuel cell by numerical simulation and optimization
1887(6)
Chayanin Jawrungrit
Anuvat Sirivat
Kitipat Siemanond
Screening methodology for biorefinery and power to chemicals concepts
1893(6)
Emanuela Peduzzi
Guillaume Boissonnet
Francois Marechal
Strategic Energy Planning under Uncertainty: a Mixed-Integer Linear Programming Modeling Framework for Large-Scale Energy Systems
1899(6)
Stefano Moret
Michel Bierlaire
Francois Marechal
Condition-based chemical cleaning of crude oil deposits - a conceptual model
1905(6)
Laura Lanchas-Fuentes
Emilio Diaz-Bejarano
Francesco Coletti
Sandro Macchietto
Model-based monitoring of thermal-hydraulic performance of refinery heat exchangers undergoing fouling
1911(6)
Emilio Diaz-Bejarano
Francesco Coletti
Sandro Macchietto
Distillation Energy Assessment for Solvent Recovery from Carbon Dioxide Absorption
1917(6)
Cristina Mendez-Alvarez
Valentin Plesu
Alexandra E. Bonet Ruiz
Jordi Bonet Ruiz
Petrica Iancu
Joan Llorens
Enhanced Distillation Based on Feed Impurities
1923(6)
Daniel Ortuno-Boter
Valentin Plesu
Alexandra E. Bonet Ruiz
Jordi Bonet Ruiz
Petrica Iancu
Joan Llorens
Hybrid MILP/Simulation/Heuristic Algorithms to Complex Hoist Scheduling Problems
1929(6)
Natalia P. Basan
Carlos A. Mendez
Online Approach for Diagnosis and Rectification of Model-Plant Mismatch in Open Reaction Systems using Incremental Framework
1935(6)
D.M. Darsha Kumar
Shankar Narasimhan
Nirav Bhatt
PiXAR: Pinch and eXergy for the Analysis and Retrofit design of industrial processes
1941(6)
Stephane Gourmelon
Raphaele Hetrewc
Pascal Floquet
Integrated modeling of agricultural and industrial processes within life cycle design for environment
1947(6)
Kotaro Ouchida
Yasunori Kikuchi
Tatsuya Okubo
Application of a simultaneous approach for process scheduling and water minimisation in batch plants
1953(6)
Jui-Yuan Lee
Dominic C.Y. Foo
A computer-aided scenario analysis of national and regional energy systems based on feasible technology options
1959(6)
Yasunori Kikuchi
Yuichiro Kanematsu
Tatsuya Okubo
Calculation of the Optimal Distribution of the Active Metal Site Concentration in a Ziegler-Natta Catalyst to Maximize Polymer Yield in Olefin Polymerizations
1965(6)
Mohammed A. Alkatheri
Apostolos Baltsas
Costas Kiparissides
SolACE: An Open Source Package for Nolinear Model Predictive Control and State Estimation for (Bio)Chemical Processes
1971(6)
Satyajeet S. Bhonsale
Mattia Vallerio
Dries Telen
Dominique Vercammen
Filip Logist
Jan van Impe
Global optimization of nonconvex bilevel problems: implementation and computational study of the Branch-and-Sandwich algorithm
1977(6)
Remigijus Paulaviaius
Polyxeni M. Kleniati
Claire S. Adjiman
A Novel Experimental Strategy for Validating Human Failure Probabilities in Risk Assessment
1983(6)
Mohd Umair Iqbal
Rajagopalan Srinivasan
Life cycle modelling of a handicraft sector: the anchovy canning industry in Cantabria (Northern Spain)
1989(6)
M. Margallo
J. Laso
R. Aldaco
J. Celaya
C. Gazulla
P. Fullana
A. Irabien
A New Technology to Optimize the Use of H2S Scavengers in the Crude Oil Production
1995(6)
Ewerton E.S. Calixto
Fernando L.P. Pessoa
Andre L.C. Bonfim
Eduardo M. Queiroz
Integrated Biorefinery Scheme Design for the Coproduction of Premium Quality Liquid Fuels and Propylene
2001(6)
Zhihong Yuan
Mario R. Eden
Modelling of a Post-combustion CO2 Capture Process Using Bootstrap Aggregated Extreme Learning Machines
2007(6)
Zhongjing Bai
Fei Li
Jie Zhang
Eni Oko
Meihong Wang
Z. Xiong
D. Huang
Development of semantically-enabled community hubs in biorefineries and biorenewables
2013(6)
Eirini Siougkrou
Antonis Kokossis
Framework for assessing social sustainability in supply chains
2019(6)
Tamara Popovic
Ana Carvalho
Andrzej Kraslawski
Ana Barbosa-Povoa
A Comparative Study of Fischer-Tropsch Synthesis for Liquid Transportation Fuels Production from Biomass
2025(6)
Pengcheng Li
Zhihong Yuan
Mario R. Eden
Practical Implementation of a RTO in an Industrial-Scale Vapor Recompression Distillation Process
2031(6)
Danilo R.C. Menezes
Jose Eduardo A. Graciano
Fabio dos S. Liporace
Galo A.C. Le Roux
Integrated multi-level bioenergy supply chain modelling applied to sugarcane biorefineries in South Africa
2037(6)
Florent Delval
Miao Guo
Koen H. van Dam
Jonas Stray
Kate Haigh
Johann Gorgens
Nilay Shah
Cognitive Engineering for Process Safety: Effective Training for Process Operators using Eye Gaze Patterns
2043(6)
Madhu Kodappully
Babji Srinivasan
Rajagopalan Srinivasan
Relating Reaction Rate Constant to Structures of Reactants and Solvent Using a Hybrid GA-DT Approach
2049(6)
Shounak Datta
Vikrant A. Dev
Mario R. Eden
Multi-Objective Computer-Aided Molecular Design of Reactants and Products
2055(6)
Vikrant A. Dev
Nishanth G. Chemmangattuvalappil
Mario R. Eden
Non-intrusive Appliance Load Monitoring for Electrical Energy Systems Simulation and Analysis - A case study in India
2061(6)
Nikita Patel
Babji Srinivasan
Rajagopalan Srinivasan
Multi-Period Heat Exchanger Network Synthesis Involving Multiple Sources of Utilities and Environmental Impact
2067(6)
Adeniyi J. Isafiade
Michael Short
A New Methodology to Apply Total Site Analysis as a Synthesis Tool to Select and Integrate Processes in Multiple-Product Biorefinery Plants
2073(6)
Konstantinos A. Pyrgakis
Antonis C. Kokossis
Discovering Valorisation Paths in Waste Biorefineries using an Ontology Engineering Approach
2079(6)
Foteini Barla
Filopoimin Lykokanellos
Antonis C. Kokossis
Integration of Biomass Gasification and CO2 Capture in the LCA Model for the Energy, Water and Food Nexus
2085(6)
Tareq Al-Ansari
Anna Korre
Zhenggang Nie
Nilay Shah
Sensor Fault Detection and Fault Tolerant Control of a Crude Distillation Unit
2091(6)
Sulaiman A. Lawal
Jie Zhang
Utilising Semantics for Improved Decision Making in Bio-refinery Value Chains
2097(6)
Nikolaos Trokanas
Madeleine Bussemaker
Frahjo Cecelja
MINLP Wastewater Stabilisation Ponds Synthesis using Rigorous Models under Different Scenarios
2103(6)
M. Paz Ochoa
Vanina Estrada
Patricia M. Hoch
Process simulation integrated with experimental Thermodynamics Lab to Chem. Eng. undergraduate students
2109(6)
Henrique A. Matos
M. Rosinda C. Ismael
Evaluation of a calcium looping CO2 capture plant retrofit to a coal-fired power plant
2115(6)
Dawid P. Hanak
Chechet Biliyok
Edward Anthony
Vasilije Manovic
Constrained Smoothing of Experimental Data in the Identification of Kinetic Models
2121(6)
Carolina S. Vertis
Nuno M.C. Oliveira
Fernando P. Bernardo
Optimal Design of Industrial Waste-to-Energy Networks
2127(6)
Vasco Bolis
Elisabet Capon-Garcia
Konrad Hungerbuhler
Modelling of Starch Production by Microalgal Biomass under Multi-nutrient Limitation
2133(6)
Gonzalo Figueroa-Torres
Jon Pittman
Constantinos Theodoropoulos
Water and Energy. Why not Optimize them Simultaneously?
2139(6)
E. Arzate
P. Huitzil
B.E. Martinez
I. Grossmann
Experimental Studies and Model Based Optimisation of Microalgal Production of Fuels and Chemicals
2145(6)
Mesut Bekirogullari
Jon Pittman
Constantinos Theodoropoulos
Model analysis and optimization under uncertainty using highly efficient integration techniques
2151(6)
Fernando P. Bernardo
Unit Commitment Scheduling Including Transmission Constraints: a MILP Formulation
2157(3006)
Gonzalo E. Alvarez
Marian G. Marcovecchio
Pio A. Aguirre
Optimization of a crude oil distillation unit based on total-process simulation
5163(6)
K. Wang
B.J. Zhang
Q.L. Chen
Capacity Planning with Rational Markets and Demand Uncertainty
5169(6)
Anvitha Kandiraju
Pablo Garcia-Herreros
Pratik Misra
Erdem Arslan
Sanjay Mehta
Ignacio E. Grossmann
Quality Education in Romanian Chemical Engineering Higher Education
5175
Razvan Onofrei
Petrica Iancu
Tiberiu D. Danciu
Valentin Plecu
A Study on the Endogenous Symbiosis of First and Second Generation Biorefineries: Towards a Systematic Methodology
2181(6)
Aikaterini D. Mountraki
Bouchra B. Mlayah
Antonis C. Kokossis
Process evaluation of the ecological performance of food and energy plant production systems
2187(6)
Rene Kollmann
Franz Friebel
Georg Neugebauer
Michael Narodoslawsky
An MILP Model for the Optimization of Hybrid Renewable Energy System
2193(6)
Okechukwu Kelechi
Hella Tokos
TAEE Sustainable Process Design and Simulation
2199(6)
Olivia A. Perederic
Valentin Plep
Petrica Iancu
Alexandra E. Bonet-Ruiz
Jordi Bonet-Ruiz
Bertram Muchan
A Cooperative Distributed Model Predictive Control for Nonlinear Systems with Automatic Partitioning
2205(6)
Rosiane R. Rocha
Luis C. Oliveira-Lopes
Modelling, Simulation and experimental validation for styrene miniemulsion polymerization process
2211(6)
Paula M.N. Ambrogi
Maria Magdalena E. Colman
Reinaldo Giudici
Dynamic Metabolic Modelling of Cupriavidus necator DSM 545 in PHB Production from Glycerol
2217(6)
Chenhao Sun
Colin Webb
Constantinos Theodoropoulos
Waste heat utilisation of Croatian cement industry accounting Total Site demands
2223(6)
S. Boldyryev
H. Mikulcic
G. Krajacic
N. Duic
Co-gasification of torrefied wood biomass and sewage sludge
2229(6)
Peter Trop
Marko Agrez
Danijela Urbancl
Darko Goricanec
Total Site Resource Efficiency System
2235(6)
Janez Petek
Peter Glavio
Anja Kostevsek
Empirical Modelling to support Scale up of Primary Pharmaceutical Processes
2241(6)
Melanie Dumarey
Sameer Talwar
Mohammad Yahyah
John Peterson
A Methodology for Linear Modeling Applied to Process Synthesis of Ethanol from Sugarcane Bagasse
2247(6)
Viviana Quintero
Roberto Pineda
Claudia Valderrama
Liliana Hernandez
Viatcheslav Kafarov
Macro- and Micro-economic Perspectives regarding the Syntheses of Sustainable Bio-Fuels Supply Networks
2253(6)
Zan Zore
Lidija Cucek
Zdravko Kravanja
Innovative 3D Training Platform for Recycling of Waste coming from Electric and Electronic Devices
2259(6)
L. Somakos
E.R. Chasapidi-Mavroeidi
K. Aravossis
S. Tzovaras
P. Glavic
B. Stejskal
A. Szilagyi
Papastamatiou
T. Doukoulos
Process Integration of Heat Utilised from Exhaust Gases
2265(6)
Olga P. Arsenyeva
Jiri J. Klema
Lida eueek
Petro O. Kapustenko
Yana Savchenko
Hydrocracking Reaction Model of Petroleum Heavy Cuts Using Molecular Reconstruction
2271(6)
Claudia X. Ramirez
Juan E. Torres
David de J. Perez-Martinez
Viatcheslav Kafarov
Alexander Guzman
Data Reconciliation for Energy System Flowsheets
2277(6)
Jun Yow Yong
Andreja Nemet
Milos Bogataj
Zan Zore
Petar Sabev Varbanov
Zdravko Kravanja
Jiri Jaromir Klemes
Power-to-Heat: Opportunities in Reserve Market Participation for Flexible Chemical Production
2283(6)
Christoph Westerwalbesloh
Ganzhou Wang
Alexander Mitsos
Optimisation of heat exchanger networks involving isothermal and non-isothermal mixing by global and local solvers
2289(6)
Zlatan Mujkic
Nidret Ibric
Milos Bogataj
Zdravko Kravanja
Elvis Ahmetovic
Integrated Hybrid Life Cycle Optimization with Application to Sustainable Design of A UK Advanced Biofuel Supply Chain
2295(6)
Dajun Yue
Fengqi You
Optimal Design and Synthesis of Algae Processing Network under Uncertainty Based on Return on Investment
2301(6)
Jian Gong
Fengqi You
Systematic Design of the Green Ethylene Glycol Downstream Process under the Generalized Disjunctive Programming Framework
2307(6)
Michele Corbetta
Ignacio E. Grossmann
Flavio Manenti
Marco Bernardi
Alessandra Frattini
A pharmacokinetic-pharmacodynamic model for individualisation of an oral anticoagulation therapy
2313(6)
Myriam Ferrari
Luigi Bosa
Riccardo De-Luca
Massimiliano Barolo
Carlo F. Zambon
Vittorio Pengo
Roberto Padrini
Fabrizio Bezzo
Multi-objective optimization of energy networks under demand uncertainty
2319(6)
Edwin Zondervan
Ignacio E. Grossmann
A Convex Hull Formulation for the Design of Optimal Mixtures
2325(6)
Suela Jonuzaj
Claire S. Adjiman
An Ontological Approach to Chemical Engineering Curriculum Development
2331(6)
Madeleine Bussemaker
Nikos Trokanas
Franjo Cecelja
Dynamic Real-time Optimization Under Uncertainty of a Hydroformylation Mini-plant
2337(97)
David Muller
Erik Esche
Markus Illner
Tobias Pogrzeba
Marcel Schmidt
Reinhard Schomeicker
Lorenz T. Biegler
Gunter Wozny
Integrated Computer-aided Framework for Sustainable Chemical Product Design and Evaluation
2434(5)
Sawitree Kalakul
Stefano Cignitti
Lei Zhang
Rafiqul Gani
Production of Benzene, Toluene, and the Xylenes from Natural Gas via Methanol
2439
Alexander M. Niziolek
Onur Onel
Christodoulos A. Floudas
Mathematical Modeling of a Raceway Pond System for Biofuels Production
2355(6)
Jose A. Gomez
Kai Heffner
Paul I. Barton
Configurable Scheduling Solution using Flexible Heuristics
2361(276)
Tiro Harjunkoski
Reinhard Bauer
Towards Outcomes-Based Education of Computer-Aided Chemical Engineering
2637
Zorka Novak Pintarie
Zdravko Kravanja
Nonlinear Model Order Reduction for Catalytic Tubular Reactors
2373(6)
Jens Bremer
Pawan Goyal
Lihong Feng
Peter Benner
Kai Sundmacher
Multi-objective Optimisation Approach for the Synthesis of Water Treatment Plants
2379(6)
Mariya N. Koleva
Songsong Liu
Craig A. Styan
Lazaros G. Papageorgiou
P-Graph Approach to Carbon-Constrained Energy Planning Problems
2385(6)
Raymond R. Tan
Kathleen B. Aviso
Dominic C.Y. Foo
Innovative computational tools and models for the design, optimization and control of carbon capture processes
2391(6)
David C. Miller
Deb Agarwal
Debangsu Bhattacharyya
Joshua Boverhof You-Wei Cheah
Yang Chen
John Eslick
Jim Leek
Jinliang Ma
Priyadarshi Mahapatra
Brenda Ng
Nikolaos V. Sahinidis
Charles Tong
Stephen E. Zitney
Decision Making Across Different Scales: From Process Control to Supply Chain Management
2397(6)
Marianthi Ierapetritou
Nihar Sahay
ESCAPE-ing into a sustainable future: Can we optimise our way to sustainable development?
2403(1)
Adisa Azapagic
Models and Modelling Tools for Chemical Product and Process Design
2404(1)
Rafiqul Gani
Process Integration: Pinch Analysis and Mathematical Programming - Directions for Future Development
2405(2)
Jiri Jaromir Klemeg
Petar Varbanov
Management of "Systematic Innovation": A kind of quest for the Holy Grail!
2407(2)
Jean-Marc Le Lann
Stephane Negny
Celine Bryon-Porte
Challenges and Opportunities in Sustainable Supply Chains
2409(1)
Ana Paula Barbosa-Povoa
The ALAMO approach to machine learning
2410(1)
Nick Sahinidis
Index
2411
Professor Zdravko Kravanja is a professor at the University of Maribor, Slovenia