This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems).
The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements.
The following topics are covered:
- Characterization of binder-aggregate interaction
- Innovative testing of bituminous binders, additives and modifiers
- Durability and aging of asphalt pavements
- Mixture design and compaction analysis
- Environmentally sustainable materials and technologies
- Advances in laboratory characterization of bituminous materials
- Modeling of road materials and pavement performance prediction
- Field measurement and in-situ characterization
- Innovative materials for reinforcement and interlayer systems
- Cracking and damage characterization of asphalt pavements
- Recycling and re-use in road pavements
This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
Part I. Characterization of binder-aggregate interaction.- Development
of Failure Master Curve for Asphalt Mastics Characterization, by P.
Teymourpour, H. U. Bahia.- Semi-automatic evaluation of the degree of bitumen
coverage on bitumen-coated aggregates, by R. Lamperti, C. Lantieri, C.
Sangiorgi, G. Bitelli, A. Simone.- An Advanced Low Temperature Rheological
and Fracture Test Method for Bitumen Purchase Specifications and Pavement
Performance Prediction: 4-mm DSR/ABCD, by M. J. Farrar, S. Kim, T. Pauli, J.
P. Planche.- Microstructure-Based Visco-Elastoplastic Continuum Model of
Asphalt Concrete, by M. H. Zahabi, M. M. Karimi, N. Tabatabaee.- Estimation
of appropriate filler quantity in asphalt mix from microscopic studies, by A.
Kuity, A. Das.- A mineralogical approach of the interactions between bitumen,
clay and water in hot mix asphalt (HMA), by C. W. Chen, V. Gaudefroy, M. Duc,
Y. Descantes, F. Hammoum, J. P. Magnan.- Part II. Innovative testing of
bituminous binders, additives and modifiers.- Storage stability of bituminous
binders reinforced with nano-additives, by E. Santagata, O. Baglieri, L.
Tsantilis, G. Chiappinelli.- Ageing performances of asphaltite modified
bitumens.- comparisons with equivalent petroleum bitumens, by A. Themeli, E.
Chailleux, F. Farcas, C. Chazallon, B. Migault, G. Didelet.- The Interaction
of Polyphosphoric Acid with Bituminous Binders, by H. Soenen, S. Heyrman, X.
Lu, P. Redelius.- LIBS: An innovative laboratory technique for the
characterisation of bituminous material, by H. Martin.- Rheological
Evaluation of Short- and Long-Term Performance for Warm Mix Asphalt
(WMA)Binders, by M. Sadeq, E. Masad, H. Al-Khalid, O. Sir, D. Little.-
Rheological Characterization of Asphalt Binders and Mixtures Modified with
Carbon Nanotubes, by H. Wang, J. Yang, M. Gong.- Part III. Durability and
aging of asphalt pavements.- Bitumen / Aggregate affinity Rilem Round Robin
Test on rolling bottle Test, by L. Porot, J. Besamusca, H.Soenen, A.
Apeagyei, J. Grenfell, D. Sybilski.- Study on the ageing behavior of South
American bitumen, by S.A. Mohan, J.L.M. Voskuilen, S.A. Firtoe.- Asphalt
mixture sensitivity to water and frost, by M. Maliszewski, A. Zofka, D.
Maliszewska, D. Sybilski.- Using Highly Oxidant Gas for Simulating Long-Term
Ageing of Asphalt Mix Specimens in the Lab, by D. Steiner, B. Hofko, M.
Hospodka, F. Handle, L. Eberhardsteiner, J. Füssl, H. Grothe, R. Blab.-
Methods for analyzing the chemical mechanisms of bitumen aging and
rejuvenation with FTIR spectrometry, by P. Mikhailenko, A. Bertron, E.
Ringot.- LEAB-PA, a half warm Porous Asphalt can increase the lifetime, by G.
Gaarkeuken, M. Oosterveld, M.L.M. Sprenger, J.L.M. Voskuilen.- Part IV.
Mixture design and compaction analysis.- Production of hot-mix asphalt with
PMB: compactability and mechanical behavior characterization, by R. Micaelo,
A. Gameiro, L. Quaresma, L. Picado-Santos.- Compaction of Open-Graded HMAs
evaluated by a fuzzy clustering technique, by A. Amadore, G. Bosurgi, O.
Pellegrino, G. Sollazzo.- Effects of anisotropy on performance of HMA
specimens due to roller compaction, by B. Hofko, R. Blab.- Reliance of
pavement texture characteristics on mix-design and compaction process, by G.
Cantisani, A. DAndrea, P. Di Mascio, G. Loprencipe.- Coloured asphalt
pavements: mix design and laboratory performance testing, by N. Piérard, J.
De Visscher, S. Vansteenkiste, A. Vanelstraete.- Evaluation of Air Voids in
Reinstatement Materials for Footways, by I. Artamendi, B. Allen, C. Allpress,
P. Sabin, P. Phillips.- Part V. Advanced characterization of interlayer
systems.- Inter-laboratory Shear Evaluation of Reinforced Bituminous
Interfaces, by G. Ferrotti1, A. DAndrea, M. Maliszewski, M. N. Partl, C.
Raab, C. Sangiorgi, F. Canestrari.- Comparison of interlayer bond behavior
due to ageing, by C. Raab, J. Grenfell, A.O. Abd El Halim, M. N. Partl.-
Investigation of Dilatancy Effects on Asphalt Interface ShearStrength, by C.
Tozzo, N. Fiore, A. DAndrea.- Field study to investigate the impact of
conditions of application of tack coats on the interlayer bond strength, by
A. Destrée, J. De Visscher, N. Piérard, A. Vanelstraete.- The Use of
Four-Point Bending Notched Beam Fatigue Tests to Rank Crack-Mitigating
Interlayers, by A. D. Wargo, S. Safavizadeh, Y. R. Kim.- Effects on bonding
of anti-reflective cracking solutions at the top bituminous interface of a
small airport pavement: a laboratory and modeling study, by P. Tataranni, C.
Sangiorgi, A. Simone, V. Vignali, P. Viola, G. Dondi.-
Geo-composite-reinforcement of polymer-modified asphalt systems, by F.
Canestrari, G. Ferrotti, M. Abuaddous, E. Pasquini.- Part VI. Modeling of
road materials and pavement performance prediction.- Prediction of the
mechanical properties of aged asphalt mixes from FTIR measurements, by M.
Perez-Martinez, P. Marsac, T. Gabet, Emmanuel Chailleux.- Micromechanical
description of bitumen aging behavior, by L. Eberhardsteiner, J. Füssl, B.
Hofko, F. Handle, M. Hospodka, R. Blab, H. Grothe.- Three different ways of
calibrating Burgers contact model for Viscoelastic model of Asphalt Mixtures
by Discrete Element Method, by H. Feng, M. Pettinari, H. Stang.- Experimental
investigation on surface performance and acoustic absorption, by F.G.
Praticò, R. Vaianab, T. Iueleb.- PSV tyre / test specimen contact, by D.
Woodward, P. Millar, G. McQuaid, R. McCall, O. Boyle.- Surface performance
characterization of single-layer surface dressing: a macrotexture prediction
model, by F.G. Praticò, R. Vaianab, T. Iueleb.- Part VII. Environmentally
sustainable materials and technologies.- Effect of Rejuvenator on Performance
Properties of WMA Mixtures with High RAP Content, by M. Sabouri, Y.T. Choi,
Y. Wang, S. Hwang, C. Baek, Y. R. Kim.- Effect of warm mix chemical additives
on the binder-aggregate bond strength and high-service temperature
performance of asphalt mixes containing electric arc furnacesteel slag, by M.
Pasetto, G. Giacomello.- Influence of Aging on the Rheological Behavior of
Warm Mix Asphalt Binders, by K. L. Roja, N. Roy, J. M. Krishnan.- Laying of
Warm Mix Asphalt: Study of the Feasibility of the Workability Measure
Modifying the Parameters of the Standard Gyratory Shear Compactor, by A.
Fabre des Essarts, A. Dony, S. Faucon-Dumont.- Laboratory Evaluation of
Complex Modulus and Fatigue Resistance of Asphalt Mixtures with RAP, by A.
Basueny, A. Carter, D. Perraton, M. Vaillancourt.- Laboratory testing methods
for evaluating the moisture damage on the aggregate-asphalt system, by S.
Anastasio, I. Hoff, C. C. Thodesen, H. U. Bahia.- Hydrothermal study of roads
with de-freezing surface, obtained by the circulation of a warm fluid in a
bonding porous asphalt layer, by S. Asfour, F. Bernardin, C. Mauduit, E.
Toussaint, J. M. Piau.- Mechanical Behaviour of Asphalt Concrete Containing
C&D Recycled Materials, by E. Bocci, G. Cerni, S. Colagrande.- Reuse of waste
foundry sand mixed with lateritic clayey soils in pavement bases and
sub-bases courses, by L. M. Klinsky Gutiérrez, G. T. P. Fabbri, V. S. dos
Santos Bardini.- A comparative study of bituminous mixtures with recycled
polyethylene added by dry and wet processes, by S. Angelone, F. Martinez, M.
Cauhape Casaux.- Rheological characterization of bituminous mastics
containing waste bleaching clays, by F. Mazzotta, C. Sangiorgi, V. Vignali,
C. Lantieri, G. Dondi.- Asphalt mixture with RAP: Mix design optimization, by
N. Bueche, A. G. Dumont, M. Pittet, S. Bressi.- Sustainable urban surface
asphalt layers, by R. Botella, R. M. Recasens, P. D. Martín, A. Ramírez
Rodríguez, F. Guisado Mateo, E. Moreno Martínez.- Part VIII. Advances in
laboratory characterization of bituminous materials.- Experimental
Investigation on the Combined Effects of Physical Hardening and Chemical
Ageing on Low Temperature Properties of Bituminous Binders, by E. Santagata,
O. Baglieri, D. Dalmazzo, L. Tsantilis.-Rheological Testing of Bitumen at Low
Temperatures with 4-mm DSR, by X. Lu, P. Uhlback, H. Soenen.- Fatigue
rheological characterization of polymer-modified bitumens and mastics, by F.
Frigio, G. Ferrotti, F. Cardone.- Influence of hydrated lime on linear
viscoelastic properties of bituminous mixtures, by C. V. Phan, H. Di
Benedetto, C. Sauzéat, D. Lesueur.- Influence of Mineral Fillers and their
Fractional Voids on Mastic Rheological and Mechanical Properties, by E.
Romeo, V. Ghizzardi, S. Rastelli, A. Montepara.- Energy Dissipation in
Asphalt Mixtures Observed in Different Cyclic Stress-Controlled Fatigue
Tests, by I. Isailovi, A. C. Falchetto, M. P. Wistuba.- Deterioration of HMA
Partially Saturated with Water or Brine Subjected to Freeze-Thaw Cycles, by
S. Lamothe, D. Perraton, H. Di Benedetto.- Experimental study of moisture
sensitivity of aggregate-bitumen bonding strength using a new pull-off test,
by J. Zhang, A. K. Apeagyei, J. Grenfell, G. D. Airey.- Effect of Fine
Aggregate Composition on Moisture Susceptibility of Hot Mix Asphalt, by G. LM
Leung, A. W. G. Wong.- Evaluation of rutting properties of bituminous binders
by means of single shear creep-recovery (SSCR) tests and correlation with
mixture performance, by E. Santagata, O. Baglieri, M. Alam, P. Riviera.-
Mechanisms of Failure in Uniaxial Repeated Creep Test and the Relationship to
Aggregate Packing, by N. Roohi Sefidmazgi, H. U. Bahia.- Development of a
test and classification method to objectively determine the colour of
coloured bituminous pavements, by K. Denolf, N. Piérard, A. Vanelstraete.- A
new performance test for resistance to ravelling by traffic: laboratory and
field experience in Belgium, by J. De Visscher, A. Vanelstraete.- Part IX.
Field measurement and in-situ characterization.- Active Fillers Effect on
in-situ Performances of Bitumen Emulsion Recycled Mixtures, by G. Betti, G.
Airey, K. Jenkins, A. Marradi, G. Tebaldi.- Innovative longitudinal joints
between new and oldPorous Asphalt, by J. Voskuilen, L. Houben.- High Aircraft
Tire Pressure Effects on HMA Airfield Pavements, by N. Garg, Q. Li, M.
Haggag.- Development of new embedded expansion joint using high flexibility
Stone Mastic Asphalt, by N. Okamoto, T. Kinoshita, T. Futagi.- Development of
specifications and guidelines for hot in-place recycling in Finland Outline
and framework, by M. Makowska, T. Pellinen.- Part X. Recycling and re-use in
road pavements.- Rheological investigation of asphalt mixtures containing RAP
and RAS, by A. C. Falchetto, K. H. Moon, M. P. Wistuba, M. O. Marasteanu.-
The effect of curing on the mechanical behavior of cement-bitumen treated
materials, by C. Godenzoni , F. Cardone, A. Graziani, M. Bocci.- Blending
Simulation of RA and Virgin Binders in Hot Recycled Mixtures, by M. Mohajeri,
A. A. A. Molenaar, M. F. C. van de Ven.- Thermal and water effects on virgin
bitumen, recycled and mastic mixtures, by S. dos Santos, L. D. Poulikakos, M.
N. Partl.- Comparative Analysis of Stiffness Modulus and Fatigue Resistance
of Asphalt Concretes Containing RAP Materials, by N. Baldo, E. Manthos, M.
Pasetto, A.F. Nikolaides.- In plant production of hot recycled mixtures with
high reclaimed asphalt pavement content: a performance evaluation, by A.
Stimilli, A. Virgili, F. Giulian, Francesco Canestrari.- Evaluation of a 100%
Rap Recycling Project in Fort Wayne, Indiana, by Geoffrey M. Rowe, John
Barry. Ken Crawford.- Hot Recycling of Reclaimed Asphalt using a Bio-based
Additive, by A. Grilli, E. Bocci, M. Bocci.- Tests Campaign Analysis to
Evaluate the Capability of Fragmentation Test to Characterize Recycled
Asphalt Pavement (RAP) Material, by D. Perraton, G. Tebaldi, E. Dave , F.
Bilodeau, G. Giacomello, A. Grilli, A. Graziani, M. Bocci, J. Grenfell, P.
Muraya, M. Pasetto, K. Kuna, A. Apeagyei, D. Lo Presti, G. Airey, K. Jenkins,
E. Hajj, M. Hugener, P. Marsac.- Part XI. Cracking and damage
characterization of asphalt pavements.- Comparison of LaboratoryCracking Test
Results with Field Performance of Moderate and High RAP Content Surface
Mixtures on the NCAT Test Track, by R. C. West, N. H. Tran, A. J. Taylor, J.
R. Willis.- Implementation of Laboratory Testing to Predict Low Temperature
Cracking Performance of Asphalt Pavements, by E. V. Dave , B. Helmer, C.
Hanson, J. Munch, L. Johanneck.- Fatigue Performance of Stone Mastic Asphalt
designed with the Baileys Method, by M. Pasetto, N. Baldo.- Evaluation of
different methods for the estimation of the bitumen fatigue life with DSR
testing, by A. Pereira, R. Micaelo, L. Quaresma, M. Cidade.- Evaluation of
crack propagation in asphalt mixture through photoelasticity, by S. Büchler,
M. Wistuba, A. C. Falchetto.