|
|
|
|
Current Industrial Activities of Tribology in China |
|
|
3 | (1) |
|
|
|
The Fullerene-Like Nanostructure Hydrogenated Carbon Films with Super-Low Friction |
|
|
4 | (1) |
|
|
|
|
|
Tribology in Nanomanufacturing---Interaction between Nanoparticles and a Solid Surface |
|
|
5 | (6) |
|
|
|
|
|
Tribology at Small Scales |
|
|
11 | (1) |
|
|
|
Frontiers of Research in Liquid Lubrication |
|
|
12 | (3) |
|
|
|
|
|
|
EHL with Grease at Low Speeds |
|
|
15 | (5) |
|
|
|
|
|
|
|
The Nature of Adhesion and Friction |
|
|
20 | (1) |
|
|
|
|
|
21 | (1) |
|
|
|
Active Control of Sliding Friction |
|
|
22 | (1) |
|
|
|
|
|
Superhard and Low Friction Nanocomposite Coatings: Design, Synthesis, and Applications |
|
|
23 | (1) |
|
|
|
|
|
|
|
|
|
|
|
Tribology of Metal-on-Metal Bearings at High Inclination Angles |
|
|
24 | (7) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Key Factors to Induce Cavitation-Erosion (Invited) |
|
|
31 | (1) |
|
|
|
|
|
|
|
Mechanical and Tribological Properties of TiC-Reinforced HSS-Based Composites with an Interpenetrating Network for High Temperature Self-Lubrication Applications |
|
|
32 | (6) |
|
|
|
|
|
Friction and Wear Characteristics of Advanced Space Lubricants (Invited) |
|
|
38 | (2) |
|
|
|
|
|
|
|
|
|
Lubrication Analysis of Journal Bearing and Rotor System Using CFD and FSI Techniques |
|
|
40 | (2) |
|
|
|
|
|
|
|
|
|
Oil Film Behavior under Minute Vibrating Conditions in EHL Point Contacts |
|
|
42 | (2) |
|
|
|
|
|
|
|
Different Loading and Motion Applied on Hip Simulators Affects the Lubrication of Metal-on-Metal Hip Implants |
|
|
44 | (2) |
|
|
|
|
|
|
|
|
|
EHD Lubrication of Different Types of Gears |
|
|
46 | (2) |
|
|
|
The Role of Heat Partition in Elastohydrodynamic Lubrication (Invited) |
|
|
48 | (2) |
|
|
|
|
|
|
|
|
|
Influence of Surface Roughness on Elastohydrodynamic Journal Bearings with Non-Newtonian Lubricants |
|
|
50 | (2) |
|
|
|
|
|
Theoretical Investigation of Journal Bearings with Non-Newtonian Fluids Included Thermal Effects |
|
|
52 | (2) |
|
|
|
|
|
Magnetic Fluid Based Squeeze Film Behavior between Transversely Rough Curved Plates |
|
|
54 | (2) |
|
|
|
|
|
|
|
Engine Lubrication System Analysis and Oil Pump Design Optimization |
|
|
56 | (5) |
|
|
|
Temperature-Dependent Rheology and Tribology of Lubrication Greases Investigated with New Flexible Platform for Tribological Measurements on a Rheometer |
|
|
61 | (3) |
|
|
|
|
|
Study on Characteristic Parameters of Wear Particle Boundary |
|
|
64 | (6) |
|
|
|
|
|
Viscosity Variation Model and Its Application in Micro/Nano-Scale Clearance |
|
|
70 | (5) |
|
|
|
|
|
|
|
Numerical Solving Method for the Structural Stiffness of Gas Foil Bearings |
|
|
75 | (6) |
|
|
|
|
|
|
|
Biotribological Properties of Natural Swine Joint Cartilage |
|
|
81 | (3) |
|
|
|
|
|
Effect of Surface Texturing on Lubrication Film Formation within Non-Conformal Contacts |
|
|
84 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Experimental Investigation of Time-Dependent Oil Film Pressure in a Dynamically Loaded Journal Bearing |
|
|
86 | (8) |
|
|
|
|
|
|
|
Experimental Research and Numerical Simulation of LY12 and HPb62-2 Ring Compression |
|
|
94 | (4) |
|
|
|
|
|
|
|
|
|
Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs |
|
|
98 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wettability Study of Multiply-Alkylated Cyclopentanes (MACs) on Silicon Substrates |
|
|
102 | (2) |
|
|
|
|
|
Numerical Analysis on Hydrodynamics of Circular Translational Polishing under Mixed Lubrication |
|
|
104 | (5) |
|
|
|
|
|
Micro-Tribological Analysis of POM-MoS2-Compounds |
|
|
109 | (1) |
|
|
|
|
|
|
|
On Lubrication Characteristics of Dual Tori Double-Enveloping Toroidal Worm Drive |
|
|
110 | (2) |
|
|
|
|
|
|
|
|
|
Thermoelastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load |
|
|
112 | (4) |
|
|
|
|
|
|
|
Transient Behavior of Elasto-Metal-Plastic Journal Bearing during the Stage of Stop |
|
|
116 | (4) |
|
|
|
|
|
|
|
Analyses on the Splashing Parameters of High-Speed Oil Impacted a Wall in Jet Lubrications |
|
|
120 | (2) |
|
|
|
|
|
|
|
|
|
Interferometry Measurement of Spinning Effect on Sliding EHL |
|
|
122 | (3) |
|
|
|
|
|
|
|
Effect of Wide Dimples on Planar Contact Lubrication |
|
|
125 | (2) |
|
|
|
|
|
|
|
|
|
Friction Properties and Microstructure of Al-Cu-Fe Nano Films |
|
|
127 | (3) |
|
|
|
|
|
|
|
Tribological Properties of Ti6Al4V Alloy by FOTS Self-Assembled Monolayers Modification Treatment |
|
|
130 | (4) |
|
|
|
|
|
Influence of Spinning Effect on the Rolling EHL Films |
|
|
134 | (2) |
|
|
|
|
|
|
|
A Study on Lubrication Characteristics between Piston Ring and Cylinder Bore of Bent-Axis Type Piston Pump |
|
|
136 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
The Fabrication and Lubricant Performance of MoS2 Nanotubes Arrays |
|
|
140 | (2) |
|
|
|
|
|
The Research on the Lubricant Aging under Durability Test of the Porous Sliding Bearings |
|
|
142 | (2) |
|
|
|
|
|
|
|
Models for Predicting Friction Coefficient and Parameters with Influence in Elastohydrodynamic Lubrication |
|
|
144 | (2) |
|
|
|
|
|
J. B. Sanchez-Penuela Lejarraga |
|
|
|
|
|
|
|
|
|
|
|
|
Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning |
|
|
146 | (5) |
|
|
|
Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact |
|
|
151 | (2) |
|
|
|
|
|
|
|
|
|
Hydrodynamic Analysis and Experiment Verification of the High-Pressure Small-Flow Centrifugal Pump |
|
|
153 | (2) |
|
|
|
|
|
|
|
Effect of Liquid Surface Tension and Viscosity on Micro-Bubble Induced by External Electric Field |
|
|
155 | (2) |
|
|
|
|
|
Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces |
|
|
157 | (2) |
|
|
|
|
|
|
|
|
|
A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces |
|
|
159 | (8) |
|
|
|
|
|
|
|
|
|
Film Characteristics of Grease in Point Contact under Micro-Swaying Motion |
|
|
167 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Effects of Solid Body Temperature on the Non-Newtonian Thermal EHL Behavior in Point Contacts (Invited) |
|
|
169 | (2) |
|
|
|
|
|
Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head with Ultra Thin Spacing |
|
|
171 | (4) |
|
|
|
|
|
The Analysis of Higher Guide Bearing Pad Temperature and Its Fault Diagnosis |
|
|
175 | (3) |
|
|
|
|
|
|
|
|
|
Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation (Invited) |
|
|
178 | (2) |
|
|
|
|
|
|
|
Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model |
|
|
180 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Deterministic Simulation of Surfaces in Conformal-Contact Lubrication (Invited) |
|
|
182 | (2) |
|
|
|
|
|
|
|
|
|
Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation |
|
|
184 | (2) |
|
|
|
|
|
|
|
|
|
Marangoni Stress and Its Effects on the Flow in an Evaporating Sessile Droplet |
|
|
186 | (2) |
|
|
|
|
|
Film Forming Characteristics of Oil-in-Water Emulsion with Super-Low Oil Concentration |
|
|
188 | (3) |
|
|
|
|
|
|
|
A Piston Lubrication Model Considering the Coupling between the Piston Secondary Motion and the System Inertia Variation in an IC Engine |
|
|
191 | (6) |
|
|
|
|
|
|
|
|
|
Analysis of the Combined Effect of the Surface Roughness and Inertia on the Performance of High-Speed Hydrostatic Thrust Bearing |
|
|
197 | (5) |
|
|
|
|
|
|
|
|
|
Study on the Efficiency of the New-Style Reducer with the Green Lubricant |
|
|
202 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Pressure Dependence of the Limiting Shear Stress Coefficient of Liquid Lubricants |
|
|
206 | (5) |
|
|
|
|
|
A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism: Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals |
|
|
211 | (5) |
|
|
|
|
|
|
|
A Model for the Calculation of the Micro-Pores Number of Compressively Molded Polyimide Porous Materials |
|
|
216 | (4) |
|
|
|
|
|
|
|
|
|
Frictional Dynamics in a Two Dimensional Frenkel-Kontorova Model with Square Lattice Symmetry |
|
|
220 | (5) |
|
|
|
|
|
|
|
|
|
Advances in investigation of Elasto-Aerodynamic Lubrication in Compliant Foil Bearings (Invited) |
|
|
225 | (6) |
|
|
|
|
|
|
|
Normal Stress Effects in Journal Bearing Lubrication with Maxwell Fluid |
|
|
231 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
Analysis of Bearing Outer Ring Creep with FEM |
|
|
237 | (2) |
|
|
|
|
|
|
|
Effect of Content of MoS2 on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials under Electrical Current |
|
|
239 | (3) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Research on Frictional Wear Properties of C/C Composite with Electric Current |
|
|
242 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Friction Behavior of C/C-SiC Braking Composites Fabricated by Warm Compacted-in situ Reaction |
|
|
246 | (4) |
|
|
|
|
|
|
|
|
|
Tribological Properties of Hybrid Ag4SiW12O40 Nanoparticles Multilayer Films |
|
|
250 | (5) |
|
|
|
|
|
|
|
|
|
Study on Fatigue Crack Behavior of Rail in Different Curve Radius |
|
|
255 | (2) |
|
|
|
|
|
|
|
Improvement in Wear Resistance of TiNi Alloy Processed by Equal Channel Angular Extrusion and Annealing Treatment |
|
|
257 | (3) |
|
|
|
|
|
Self-Healing of a Soft Primer Coating Caused by Plasticization during Sliding against UHMWPE |
|
|
260 | (2) |
|
|
|
|
|
|
|
Performance of an Infinitely Long Transversely Rough Hydrodynamic Slider Bearing |
|
|
262 | (2) |
|
|
|
|
|
|
|
|
|
Investigation on Fretting Fatigue Behavior of Ti811 Alloy at Elevated Temperature |
|
|
264 | (4) |
|
|
|
|
|
Dry Sliding Wear Behavior of a Tribological Couple: Spray-Deposited Al-Si/SiCp Composites/Brake Pads |
|
|
268 | (2) |
|
|
|
|
|
|
|
Wear Behaviors of a Cu-Based Bulk Metallic Glass under Various Gas Atmosphere |
|
|
270 | (3) |
|
|
|
|
|
|
|
A Study of the Correlation between Gear Wear and Vibration |
|
|
273 | (5) |
|
|
|
|
|
|
|
|
|
Study on the Relationship between Microstructural Change in Friction-Induced Deformation Layer and Friction Behavior of Austenitic Stainless Steel |
|
|
278 | (5) |
|
|
|
|
|
|
|
|
|
Abrasive Wear Behavior of Several Metallic Materials under Simulated Sand-Dust Environment |
|
|
283 | (2) |
|
|
|
|
|
Wear Behavior of Plasma-Nitrided 2Cr13 Martensitic Stainless Steel under Air and Vacuum |
|
|
285 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Sealing Performance and Wear Mechanism of PTFE Oil Seal |
|
|
287 | (5) |
|
|
|
|
|
|
|
Fretting Corrosion Wear of Synergy between Mechanical and Electrochemical for Biomaterials in Hanks Balanced Salt Solution |
|
|
292 | (6) |
|
|
|
|
|
Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies (Invited) |
|
|
298 | (2) |
|
|
|
|
|
|
|
|
|
|
|
An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel |
|
|
300 | (2) |
|
|
|
|
|
|
|
|
|
Comparative Study of Tribological Properties with Different Fibers Reinforced PTFE/PEEK Composites at Elevated Temperatures |
|
|
302 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Research on Friction Characteristic of End Faces of Mechanical Seals |
|
|
304 | (5) |
|
|
|
|
|
|
|
|
|
Failure Mechanism of Hadfield Steel Crossing |
|
|
309 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin |
|
|
311 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Tribological Behaviors at High Load of MoS2 Films in Vacuum |
|
|
313 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Experimental Study on Running-in of Steel Fiction Pair of Block on Disk in Oil with Micro-and-Nano Diamond Powder |
|
|
315 | (4) |
|
|
|
|
|
|
|
Thermomechanical Properties and Tribological Behavior of CaCO3 Whisker Reinforced Polyetheretherketone Composites |
|
|
319 | (3) |
|
|
|
|
|
|
|
Corrosive Fretting Wear Behavior of a Titanium Alloy TC11 in Artificial Seawater |
|
|
322 | (5) |
|
|
|
|
|
|
|
|
|
Investigation on Rolling Contact Fatigue and Wear Properties of Railway Rail |
|
|
327 | (2) |
|
|
|
|
|
|
|
|
|
Superlubricity Characteristics Using Ceramic Composite Mineral Powder as Lubricating Oil Additive |
|
|
329 | (4) |
|
|
|
|
|
|
|
On the Wear-Resistance of Zinc-Based Composites Reinforced by Modified Silicon Phase |
|
|
333 | (3) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On the Wear-Resistance of Low-Alloyed Steel Modified by Inoculants |
|
|
336 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Research on Worn Mechanism of Disc-Brake Pair Materials for Drilling Rig |
|
|
338 | (6) |
|
|
|
|
|
|
|
|
|
Modelling of Self-Lubrication in Frictional Interaction |
|
|
344 | (2) |
|
|
|
An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris |
|
|
346 | (2) |
|
|
|
|
|
|
|
|
|
Rolling Contact Fatigue of Silicon Nitride Balls under Pure Rolling Condition |
|
|
348 | (2) |
|
|
|
|
|
|
|
|
|
Influence of Different External Pressure on the Thermo-Mechanical Coupling of the Rough Surface during Sliding Contact |
|
|
350 | (6) |
|
|
|
|
|
|
|
Effect of Transverse Surface Topography on Cavitation Erosion |
|
|
356 | (5) |
|
|
|
|
|
|
|
|
|
|
|
The Theory of Debris Group in Ferrographic Analysis |
|
|
361 | (5) |
|
|
|
|
|
|
|
A Method to Monitor Nonferrous Debris in Ferrographic Analysis |
|
|
366 | (2) |
|
|
|
|
|
|
|
Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery |
|
|
368 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Magnetization of Friction Surfaces and Wear Particles under Tribological Processes |
|
|
370 | (2) |
|
|
|
|
|
Wear Progress Prediction of Carbide Tool in Turning of AISI1045 by Using FEM |
|
|
372 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Friction and Wear Properties of Fe7Mo6-Based Alloy under the Lubrication of Ethyl-Alcohol |
|
|
376 | (2) |
|
|
|
|
|
|
|
|
|
Seizure of PEEK and Its Composite at High Sliding Velocity in Oil Lubrication |
|
|
378 | (6) |
|
|
|
|
|
Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl |
|
|
384 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wear Characteristics under Boundary Lubrication Contacts in Phosphorated Starch Based Electrorheological Fluids |
|
|
386 | (2) |
|
|
|
|
|
|
|
|
|
Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles (Invited) |
|
|
388 | (2) |
|
|
|
|
|
The Analyzes of Mutual Influence of Contact Spots in Sliding Contact of a Periodic Surface and a Viscoelastic Foundation |
|
|
390 | (2) |
|
|
|
Different Nano-Fillers on the Tribological Properties of PTFE Nanocomposites |
|
|
392 | (4) |
|
|
|
|
|
|
|
|
|
Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in Hydrogen Peroxide |
|
|
396 | (6) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High Speed Tribology: Some Developments on Thermal Behaviors (Invited) |
|
|
402 | (2) |
|
|
|
|
|
Dry Sliding Wear Behavior of Cu-Graphite Composite within a Wide Range of Sliding Velocity |
|
|
404 | (2) |
|
|
|
|
|
Tribological Aspects of Control over Frictional Interaction between Solids in the Presence of Liquid Crystals |
|
|
406 | (2) |
|
|
|
|
|
Effects of the Concentration of Sodium Lauryl Sulfate Solution and NaCl Additive on the Potential-Controlled Friction |
|
|
408 | (5) |
|
|
|
|
|
|
|
Study of Wear and Corrosion Properties of Coated Ionic Liquid |
|
|
413 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Deformation Behavior of Al-4Cu-2Mg Alloy during Cold Upset Forging |
|
|
417 | (5) |
|
|
|
|
|
|
|
|
|
|
|
Dry Sliding Wear Behavior of Pure Aluminium and Al-Cu Alloys |
|
|
422 | (4) |
|
|
|
|
|
|
|
Tribological Properties of Spark-Plasma-Sintered Al2O3-SrSO4 Self-Lubricating Nanocomposites at Elevated Temperatures |
|
|
426 | (4) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Tribological Behaviors of Some Materials in Sea Water |
|
|
430 | (3) |
|
|
|
|
|
|
|
Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum |
|
|
433 | (2) |
|
|
|
|
|
|
|
|
|
Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of WC Based Cemented Carbides |
|
|
435 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites |
|
|
437 | (5) |
|
|
|
|
|
|
|
Friction and Wear Behavior of Laser Cladding NiAl/hBN Self-Lubricating Composite Coating |
|
|
442 | (1) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Research on the Wear-Resisting Material Produced by Vacuum Evaporation Pattern Casting |
|
|
443 | (4) |
|
|
|
|
|
|
|
|
|
Effect of Surface Topography on Friction and Wear of Cast Iron for Cylinder Liners |
|
|
447 | (2) |
|
|
|
|
|
|
|
|
|
Wear Resistance Analysis of Hardening Materials for Engine Cylinder |
|
|
449 | (5) |
|
|
|
|
|
|
|
Effects of Speed Sequence on Friction Properties of Sintered Cu-SiO2 |
|
|
454 | (3) |
|
|
|
|
|
|
|
|
|
The Fluid Dynamic Lubrication between Tooth Surfaces of High Order Contact |
|
|
457 | (3) |
|
|
|
Study on Friction and Wear Behavior of Glass Fiber and Fly Ash Reinforced MC Nylon Composites |
|
|
460 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate |
|
|
464 | (3) |
|
|
|
|
|
|
|
|
|
|
|
Friction and Wear of the Ceramic Coating Formed on Magnesium Alloy |
|
|
467 | (4) |
|
|
|
|
|
|
|
|
|
Thermal-Mechanical Couple Simulation of Solid Brake Disc in Repeated Braking Cycles |
|
|
471 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Preliminary Applications of King's ART Technology in Industry |
|
|
473 | (2) |
|
|
|
|
|
|
|
Wear Properties of Potassium Titanate Whiskers Reinforced ZL109 Alloy Composites |
|
|
475 | (2) |
|
|
|
|
|
Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces (Invited) |
|
|
477 | (2) |
|
|
|
|
|
Experiment Research on the Friction Performance of O-Ring with Different Oil Swelling Ratios |
|
|
479 | (3) |
|
|
|
|
|
|
|
|
|
Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or Ni-Al2O3-P Coating |
|
|
482 | (7) |
|
|
|
|
|
|
|
|
|
III. Micro/Nano-tribology |
|
|
|
Nano and Micro Indentation and Scratch Tests of Mechanical Properties of Thin Films |
|
|
489 | (2) |
|
|
|
|
|
|
|
|
|
Synthesis of Nano-MoS2 Particles and Its Role in the Self-Lubrication of Polyacetal-Based Composite |
|
|
491 | (2) |
|
|
|
|
|
|
|
|
|
Analysis of a Three-Body Contacting Model with the Adhesive Effect |
|
|
493 | (2) |
|
|
|
|
|
Analysis of Three-Body Contacting Model with Scale Effect |
|
|
495 | (2) |
|
|
|
|
|
Adhesion, Friction and Wear Measurements at Microscale |
|
|
497 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Fabrication and Nano-Tribological Behaviors of PDDA/Ag NPs Composite Molecular Deposition Films |
|
|
499 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Frequency Shift of Single Walled Carbon Nanotube under Axial Load |
|
|
503 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Effect of Heat Treatment on the Nano-Tribological Properties of Ionic Liquid Films |
|
|
505 | (2) |
|
|
|
|
|
|
|
|
|
Analysis on Wafer Tilt Effects in CMP Process |
|
|
507 | (2) |
|
|
|
|
|
|
|
Size Effects on Friction of C3602 in Cylinder Compression |
|
|
509 | (2) |
|
|
|
|
|
|
|
|
|
Investigation on the Tribological Characteristics of Nano/Micro Solid Anti-Wear Additives in Engine Lubricants |
|
|
511 | (4) |
|
|
|
|
|
|
|
|
|
|
|
The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide Nanocomposite |
|
|
515 | (1) |
|
|
|
|
|
|
|
|
|
Experimental Investigation of the Frictional Behaviors at Particle-Surface Interfaces in CMP Application Using an Atomic Force Microscope |
|
|
516 | (2) |
|
|
|
|
|
|
|
Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts |
|
|
518 | (2) |
|
|
|
|
|
Nano/Micro-Tribological Properties of Ultrathin Functionalized Imidazolium Ionic Liquid Films on Silicon Wafer |
|
|
520 | (2) |
|
|
|
|
|
Micro Asperity Type Induced in Electrostatic Resistance of MEMS |
|
|
522 | (6) |
|
|
|
|
|
|
|
Experimental Analysis and Numerical Simulation of the Recess Slider in Magnetic Recording System with Ultra-Thin Spacing |
|
|
528 | (3) |
|
|
|
|
|
|
|
Effect of Solvents on Frictional Properties of Monolayer Lubricant Films Coated on Magnetic Disk Surfaces (Invited) |
|
|
531 | (2) |
|
|
|
|
|
|
|
|
|
Fly-Ability and Durability Test of Dynamic Fly Height Heads at 1 nm Clearance |
|
|
533 | (3) |
|
|
|
|
|
|
|
|
|
Cavitation Erosion Characteristics of Titanium Alloy Thin Film Prepared by Ion Beam Enhanced Deposition |
|
|
536 | (4) |
|
|
|
|
|
|
|
Measurements of Vertical Elongation and Adhesive Force of Nanometers-Thick Lubricant Films on Magnetic Disks Using Micro Probe for SPM |
|
|
540 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Experimental Research on Boundary Slip of Confined Liquids at Micro/Nano Scale and Effect of Shear Rate and Viscosity |
|
|
542 | (2) |
|
|
|
|
|
|
|
|
|
Study on Micro-Scale Gas Slider Bearing with Direct Simulation Monte Carlo Method |
|
|
544 | (2) |
|
|
|
|
|
Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum |
|
|
546 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Research on Fractal Contact Model of Cylinders' Surface |
|
|
548 | (6) |
|
|
|
|
|
|
|
Friction between Diamond-Like Carbon (DLC) Films---a Molecular Dynamics Study |
|
|
554 | (2) |
|
|
|
|
|
|
|
Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System |
|
|
556 | (2) |
|
|
|
|
|
|
|
Molecular Dynamics Study on Carbon Nanotubes Sandwiched between Si Surface |
|
|
558 | (2) |
|
|
|
|
|
|
|
Tribological Aspects of Nanoimprint Process (Invited) |
|
|
560 | (2) |
|
|
|
Molecular Dynamic Simulation of Effect of Crystallographic Orientation on Nano-Indentation/Scratching Behaviors of BCC Iron |
|
|
562 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
3D Misorientation of Cantilevers and Its Impact in Friction Force Microscopy |
|
|
564 | (2) |
|
|
|
|
|
|
|
Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure |
|
|
566 | (5) |
|
|
|
|
|
Relating Friction and Processes Development during Chemical-Mechanical Polishing (CMP) |
|
|
571 | (5) |
|
|
|
|
|
|
|
An Irreversible Thermodynamics Theory for Friction and Wear (Invited) |
|
|
576 | (3) |
|
|
|
Fabrication and Flying Test of Silicon Sliders |
|
|
579 | (3) |
|
|
|
|
|
|
|
Surface Damages on Silicon Surfaces Created by Large Silica Cluster Impacts: Molecular Dynamics Simulation |
|
|
582 | (2) |
|
|
|
|
|
|
|
|
|
Silicon Oxide Surface Chemistry and Nano-Tribology (Invited) |
|
|
584 | (2) |
|
|
|
Dynamic Testing for Evaluation of HDI Robustness |
|
|
586 | (2) |
|
|
|
|
|
|
|
|
|
Effect of Wall Roughness on Electroosmotic Flow in Microchannels |
|
|
588 | (4) |
|
|
|
|
|
Nanopositioning and Nanomeasuring System: Friction and Its Control (Invited) |
|
|
592 | (5) |
|
|
|
IV. Tribology of Coatings, Surface and Interface |
|
|
|
Fundamentals of Friction and Energy Dissipation (Invited) |
|
|
597 | (1) |
|
|
|
The Future of Boundary Lubrication by Carbon Coatings and Environmentally Friendly Additives |
|
|
598 | (2) |
|
|
|
|
|
|
|
|
|
Tribological Behavior of Sputtered Boron Carbon Nitride Coatings and the Influence of Processing Gas |
|
|
600 | (2) |
|
|
|
|
|
|
|
Effect of the Prepared Process on Tribological Properties of Multi-Layer Elastomeric DLC Monolayer |
|
|
602 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Tribology Behaviors of in situ Nanoparticles Doped Molecular Deposition Films |
|
|
606 | (2) |
|
|
|
|
|
|
|
The Friction Property of Hydrogenated Carbon with Fullerene Microstructure after Annealing |
|
|
608 | (2) |
|
|
|
|
|
|
|
|
|
Study of Worn Surface Characterization Based on Singular Entropy |
|
|
610 | (2) |
|
|
|
|
|
An Adaptive Meshless Model for Asperity Thermal Elasto-Plastic Contacts Considering Temperature-Dependent Material Properties |
|
|
612 | (2) |
|
|
|
|
|
Thermal Oxidized Coating on Surface of Titanium Alloy for Improvement of Tribological Properties in Vacuum |
|
|
614 | (4) |
|
|
|
|
|
|
|
|
|
Study on Friction and Wear Properties in Vacuum for γ-Ray Irradiated PTFE Coatings |
|
|
618 | (3) |
|
|
|
|
|
|
|
|
|
Friction and Wear Behaviors of Plasma Sprayed Conventional and Nanostructured WC-12Co Coatings at Elevated Temperature |
|
|
621 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Wear Behavior of Chromizing-Titanizing Coating |
|
|
623 | (2) |
|
|
|
|
|
|
|
|
|
Preparation and Polishing Performances of α-Al2O3/Fe2O3 Composite Particles |
|
|
625 | (5) |
|
|
|
|
|
|
|
|
|
Effect of Gamma Irradiation on Friction and Wear Behavior of MoS2/Graphite Coatings in Vacuum |
|
|
630 | (3) |
|
|
|
|
|
|
|
|
|
|
|
Preparation of Silica / Alumina Composite Abrasives and Their CMP Behavior on Hard Disk Substrate |
|
|
633 | (3) |
|
|
|
|
|
Friction Properties of Laser Surface Texturing and Molybdenum Alloying Duplex-Treated Ni-Based Alloy |
|
|
636 | (2) |
|
|
|
|
|
Erosion Characteristic in Ultrasonic Cavitation Experiment |
|
|
638 | (2) |
|
|
|
|
|
Modification Effects of Potassium Titanate Whisker on the Water Absorption and Tribological Properties of PTFE Composites |
|
|
640 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Influence of the C+-Implantation Dose on the Wetting and Adhesion Properties of Silicon Sufaces |
|
|
642 | (7) |
|
|
|
|
|
The Effect of Laser Induced Oxygen-Diffusion Hardening on the Surface Structure and Scratch Resistance of Commercially Pure Ti |
|
|
649 | (2) |
|
|
|
|
|
|
|
|
|
Structure and Tribological Characterization of TiB2/TiBN Multilayer Coatings Deposited by Magnetron Sputtering |
|
|
651 | (3) |
|
|
|
|
|
|
|
First Principles Investigation of Water Adsorption on Fe (110) Crystal Surface Containing N |
|
|
654 | (4) |
|
|
|
|
|
|
|
|
|
Research on Fabrication and Tribological Properties of Ti-Al Intermetallic Compound Lubricate Film |
|
|
658 | (2) |
|
|
|
|
|
|
|
XPS and SEM Analyses of Self-Repairing Film Formed by Mineral Particles as Lubricant Additives on the Metal Friction Pairs |
|
|
660 | (5) |
|
|
|
|
|
|
|
Study on the Characteristics of Transferred Lubricating Thin Films on Ceramic Surfaces Generated in Liquid Nitrogen |
|
|
665 | (2) |
|
|
|
|
|
|
|
|
|
Cr17Ni14Mo3 Powder Laser Cladding on 45Steel Substrate |
|
|
667 | (2) |
|
|
|
|
|
|
|
|
|
Microstructure and Tribological Properties of Plasma Sprayed NiCr/Cr3C2 and NiCr/Cr3C2-BaF2 CaF2 Composite Coatings |
|
|
669 | (7) |
|
|
|
|
|
|
|
Friction and Wear Property of Amorphous Carbon Films Prepared by Ion Beam Assisted Deposition |
|
|
676 | (2) |
|
|
|
|
|
|
|
|
|
Research on Silicon Content and Structure Relationship of Amorphous Si-DLC Films by Molecular Dynamics Simulations |
|
|
678 | (4) |
|
|
|
|
|
|
|
Effect of Deposition Parameters on Nano-Mechanical Properties of DLC Films by PECVD |
|
|
682 | (3) |
|
|
|
|
|
The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves |
|
|
685 | (3) |
|
|
|
|
|
|
|
Formation and Crystallization Kinetics of Amorphous Alloys |
|
|
688 | (7) |
|
|
|
|
|
Fabrication and Wear Resistance of Ni-CeO2 Nanocomposite Coatings by Electrodeposition under Ultrasound Condition |
|
|
695 | (2) |
|
|
|
|
|
|
|
|
|
On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface |
|
|
697 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Effect of Plasma Surface Niobizing of γ-TiAl Alloy on Wear Resistance |
|
|
699 | (2) |
|
|
|
|
|
|
|
|
|
Tribological Properties and High-Speed Drilling Performance of Zr-C:H:Nx% Coatings with Different Contents of Nitrogen |
|
|
701 | (2) |
|
|
|
|
|
|
|
Tribological Behavior of Sputtered CrAlNbN Hard Coatings at Elevated Temperatures |
|
|
703 | (2) |
|
|
|
|
|
The Method of Elastic Coatings Diagnostics from Indentation Data |
|
|
705 | (2) |
|
|
|
|
|
|
|
The Effect of Electric Field on Adhesion Force with liquid in MIM Structures |
|
|
707 | (3) |
|
|
|
|
|
|
|
|
|
|
|
Simulation of Friction Composite Behavior Using Heat Treatment |
|
|
710 | (2) |
|
|
|
|
|
|
|
|
|
In-situ Microtribology with High Local Resolution |
|
|
712 | (4) |
|
|
|
|
|
|
|
|
|
Optimization of Energy Efficiency of Transparent Conducting Oxide Thin Films in the Field of Solar Cells by Microtribological Rating |
|
|
716 | (2) |
|
|
|
|
|
|
|
|
|
Contact Analysis of a Spherical Wear Particle between Elastomeric Seal and Coated Steel Surface |
|
|
718 | (2) |
|
|
|
|
|
|
|
|
|
Effect of Particles Size and Morphology of Selected Compounds of Friction Composite on Friction Performance |
|
|
720 | (2) |
|
|
|
|
|
|
|
|
|
New Technique of DLC Coating Obtaining for Tribology Applications |
|
|
722 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Effect of Spraying Parameters on Microstructure and Thermal Stability of Fe-Based Metallic Glass Coatings |
|
|
724 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Factors Influencing the Fluid-Assisted Surface Cracking under Rolling-Sliding Contact Loading |
|
|
726 | (2) |
|
|
|
|
|
|
|
Microstructure, Phase and Microhardness Distribution of Laser Deposited Ni-Based Amorphous Coating |
|
|
728 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Friction Modifiers Optimization of the Ceramic Composites for Automotive Applications |
|
|
730 | (2) |
|
|
|
|
|
|
|
|
|
Friction and Wear Behaviors and Rolling Contact Fatigue Life of TiN Film on Bearing Steel by Plasma Immersion Ion Implantation and Deposition Technique |
|
|
732 | (2) |
|
|
|
|
|
|
|
|
|
Connectivity Characterization of 3D Surface Topography Based on Mathematical Morphology |
|
|
734 | (2) |
|
|
|
|
|
|
|
|
|
Effect of Microstructure on the Friction Properties of the Electroless Ni-P Deposit |
|
|
736 | (2) |
|
|
|
|
|
|
|
|
|
Erosion Behaviors of Elastic Polymer Coatings |
|
|
738 | (4) |
|
|
|
|
|
|
|
|
|
Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments |
|
|
742 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
In-situ Measurements of Surface Temperature Fields on Ring-Block Contact Surface under Friction Using an Infrared Thermography |
|
|
744 | (4) |
|
|
|
|
|
|
|
Research on the Preparation, Characterization and Tribological Properties of Ultra-Thin Self-Assembled Monolayers on the Magnetic Head Surface |
|
|
748 | (2) |
|
|
|
|
|
Super-Hydrophobic and Self-Lubricating Carbon Coating on Ti3SiC2 |
|
|
750 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Corrosion Protection of Ultra-Thin Diamond-Like Carbon Films on Cuprum |
|
|
752 | (2) |
|
|
|
|
|
|
|
SEM and AFM Study on Nanoparticles Used as Lubricating Oils Additives |
|
|
754 | (2) |
|
|
|
Study on Wear Model for Piston Ring and Strengthened Cylinder Wall of Engine |
|
|
756 | (5) |
|
|
|
|
|
State of the Art in Laser Surface Texturing (Invited) |
|
|
761 | (2) |
|
|
|
La2O3 Effect on Microstructure, Mechanical and Tribological Properties of Ni-W Coatings |
|
|
763 | (2) |
|
|
|
|
|
A Comparative Study of Growth Process and Tribological Behavior between Single Component and Mixed Alkylsilane Self-Assembled Molecular Films |
|
|
765 | (5) |
|
|
|
|
|
|
|
|
|
The Effect of Surface Morphology on the Friction Behavior of HF-CVD Diamond Films |
|
|
770 | (2) |
|
|
|
|
|
Particles Detection and Analysis of Hard Disk Substrate after Post-CMP Cleaning |
|
|
772 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Hard Wear-Resistant Coatings: A Review |
|
|
774 | (6) |
|
|
|
|
|
|
|
The Cavitation Erosion of the Mild Carbon Steels Implanted with Titanium and Nitrogen |
|
|
780 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Research of the Pits Induced by MnS Inclusions at the Incipient Stage of Cavitation Erosion |
|
|
782 | (3) |
|
|
|
|
|
|
|
|
|
|
|
The Water Wettability of the Hydrogenated and Oxygenated Diamond Films |
|
|
785 | (2) |
|
|
|
|
|
|
|
Investigation on the Effect of Transverse Grooves on Friction Force |
|
|
787 | (4) |
|
|
|
|
|
|
|
|
|
Research for Forming Mechanism of Benard Coating Shaped Bi-Unit Composite Structure |
|
|
791 | (5) |
|
|
|
|
|
|
|
|
|
Microstructure and Mechanical Properties of TiCN Coatings Prepared by MTCVD |
|
|
796 | (5) |
|
|
|
|
|
|
|
Erosion-Wear Behavior and Mechanism of HVAS Coatings |
|
|
801 | (3) |
|
|
|
|
|
Tribological Properties of Textured Ti Coating Prepared by Masked Deposition |
|
|
804 | (2) |
|
|
|
|
|
A Method of Micro Laser Surface Texturing Based on Optical Fiber Focusing |
|
|
806 | (1) |
|
|
|
|
|
|
|
Application of Laser in Surface Technology---An Overview of the Research Work Performed in SKLT (Invited) |
|
|
807 | (1) |
|
|
|
Influence of Heat Treatment on Hardness, Elastic Modulus and Bonding Strength of Ti/Ta/TiN/TaN Nanomultilayer Coatings |
|
|
808 | (4) |
|
|
|
|
|
Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole |
|
|
812 | (4) |
|
|
|
|
|
|
|
|
|
Diamond-Like Carbon Thin Films Deposition on Glass Using an Electron Cyclotron Resonance (ECR) Microwave Chemical Vapor Deposition (CVD) System |
|
|
816 | (7) |
|
|
|
|
|
|
|
|
|
|
|
|
The Biotribological Behavior Researches on the α-Tocopherol Doped and Gamma-Irradiated UHMWPE |
|
|
823 | (2) |
|
|
|
|
|
The Effects of Protein and pH on the Tribo-Corrosion Performance of Cast CoCrMo---A Combined Electrochemical and Tribological Study |
|
|
825 | (2) |
|
|
|
|
|
|
|
Biotribological Properties of Carburized Titanium Alloys |
|
|
827 | (2) |
|
|
|
|
|
|
|
|
|
Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis |
|
|
829 | (2) |
|
|
|
|
|
|
|
|
|
|
|
A Microscopic Model for Pedestrian Slips Caused by Particle Contamination |
|
|
831 | (2) |
|
|
|
|
|
|
|
|
|
Elastohydrodynamic Lubrication of Aspherical Metal-on-Metal Artificial Hip Joints |
|
|
833 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Long-Term Contact-Coupled Wear Prediction for Total Metal-on-Metal Hip Joint Replacement |
|
|
835 | (2) |
|
|
|
|
|
|
|
|
|
The Molecular Orientation Induced by Multi-Directional Sliding in the UHMWPE Used for the Artificial Joint Replacements |
|
|
837 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Radial Displacements in a Thin Semi-Spherical Layer of Biphasic Articular Cartilage for Use in EHL Models of Natural Hip Joints |
|
|
839 | (2) |
|
|
|
|
|
|
|
Investigations of the Sliding Friction Behaviors of Locusts on Slippery Trapping Plate |
|
|
841 | (2) |
|
|
|
|
|
|
|
Tribology of Sequentially Irradiated and Annealed UHMWPE with and without Impingement |
|
|
843 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Study on UHMWPE Carrying Estradiol to Treat the Particle-Induced Osteolysis |
|
|
845 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Friction and Wear Characteristics of UHMWPE Studied by Orthogonal Method |
|
|
847 | (4) |
|
|
|
|
|
|
|
Wear Mechanism of Sliding Tracks between Femoral Head and Acetabular Cup of Artificial Joint |
|
|
851 | (2) |
|
|
|
|
|
|
|
|
|
Dynamic Contacting Characteristic of Natural Articular Cartilage under Reciprocating Sliding |
|
|
853 | (2) |
|
|
|
|
|
Application of Principal Component Analysis and Fuzzy C-Means Clustering Algorithm to the Classification of UHMWPE Wear Debris from Artificial Joints |
|
|
855 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Numerical Surface Characterization of Wear Debris from Artificial Joints Using Atomic Force Microscopy |
|
|
857 | (2) |
|
|
|
|
|
|
|
|
|
A Novel Propelling Mechanism Based on Frictional Interaction for Endoscope Robot |
|
|
859 | (2) |
|
|
|
|
|
Study on the Release of Estradiol form UHMWPE Loading Estradiol Wear Debris in vitro |
|
|
861 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
A New Method to Simulate Wear within the Patellofemoral Joint of TKR |
|
|
863 | (2) |
|
|
|
|
|
|
|
|
|
Modification and Tribological Study on Implant Polymers of Hip Prosthesis |
|
|
865 | (2) |
|
|
|
Dynamic Contact Model of Bio-Adhesive Pads of Animals: Simulation Experiments |
|
|
867 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Examination of Biolox®delta from Serum Lubricated Reciprocating Sliding Wear |
|
|
869 | (2) |
|
|
|
|
|
Lubrication of Synovial Joints (Invited) |
|
|
871 | (4) |
|
|
|
|
|
|
Mechanism and Applications of Chemical and Mechanical Polishing (Invited) |
|
|
875 | (1) |
|
|
|
|
|
|
|
Tribological Performance of Biomass-Oil from Straw Product |
|
|
876 | (2) |
|
|
|
|
|
|
|
|
|
Extreme Pressure Properties and Mechnism of Bismuth Naphthenate with Sulfur Containing Additives |
|
|
878 | (2) |
|
|
|
|
|
|
|
|
|
Synthesis and Tribology Properties of Stearate Coated Ag Nanoparticles |
|
|
880 | (2) |
|
|
|
|
|
|
|
|
|
Filtrate Reducer Activity and Antiwear Behavior of Drilling Fluid Doped with an Non-Conventional Additive |
|
|
882 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Utilization of Industrial and Agricultural Wastes as a Source of Lubricants, Additives and Fuels |
|
|
884 | (2) |
|
|
|
Effect of Tribochemical Reaction on Friction and Wear of DLC under Lubrication with Ionic Liquids at High-Vacuum Condition (Invited) |
|
|
886 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Tribochemical Reaction of Ionic Liquids on Sliding Metal Surfaces |
|
|
888 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of Lubricating Oils |
|
|
890 | (2) |
|
|
|
|
|
|
|
Preparation and Tribological Properties of Monodispersed Metallic Cu-Sn Alloy Nanoclusters with Modified Surface |
|
|
892 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Tribological Studies on a Novel Borate Ester Containing Benzothiazol-2-yl and Disulfide Groups as EP and Multifunctional Additive |
|
|
894 | (2) |
|
|
|
|
|
|
|
Tribological Behavior of AZ91D Magnesium Alloy against SAE52100 Steel under Ionic Liquid Lubricated Conditions |
|
|
896 | (3) |
|
|
|
|
|
|
|
Tribological Characteristics of Magnesium Alloy Using BN-Containing Additives under Boundary Lubricating Condition |
|
|
899 | (4) |
|
|
|
|
|
|
|
|
|
Synthesis of YPO4 Nanoparticals vis Microemulsion Method and Its Friction Properties of Lubricating Oils |
|
|
903 | (2) |
|
|
|
|
|
|
|
|
|
A Protective Coating Formed in-situ on the Cylinder Bore in Presence of Mg6Si4O10(OH)8 |
|
|
905 | (1) |
|
|
|
|
|
Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry |
|
|
906 | (2) |
|
|
|
|
|
|
|
|
|
|
|
Chemical Mechanical Planarization of Copper Using Ethylenediamine and Hydrogen Peroxide Based Slurry |
|
|
908 | (4) |
|
|
|
|
|
|
|
|
|
|
|
Rheological and Tribological Characteristics of Chemically Modified Rapeseed Oil |
|
|
912 | (3) |
|
|
|
|
|
|
|
|
|
Research on Friction-Coatings with Activated Ultra-Thick Tin-Base |
|
|
915 | (5) |
|
|
|
|
|
|
|
|
|
Surfactants Lubricating Oil Additives (Invited) |
|
|
920 | (5) |
|
|
|
|
|
|
|
|
Efficient Tribology Testing of Lubricating Oils with Nano-Additives |
|
|
925 | (1) |
|
|
|
|
|
Manufacture and Characterization of C/C-SiC Fabricated by Warm Compacted-in situ Reacted Process |
|
|
926 | (2) |
|
|
|
|
|
|
|
Experimental Investigations on Relationship between Sorptive Properties, Surface Tension, Contact Angle and Lubricity of Engine and Gear Oils |
|
|
928 | (2) |
|
|
|
|
|
The Latest Technology of Traction Drive Half-Toroidal CVT |
|
|
930 | (2) |
|
|
|
|
|
Long Life Bearing Technologies on Material Aspect |
|
|
932 | (2) |
|
|
|
|
|
|
|
Fault Diagnosis of Gear Using Oil Monitoring Samples and Vibration Data |
|
|
934 | (6) |
|
|
|
|
|
|
|
|
|
Prediction of Static Performance of Bump-Type Foil Bearings and Validation |
|
|
940 | (2) |
|
|
|
|
|
Study on Condition Monitoring in Petrochemical Equipment Using Oil Analysis Technology |
|
|
942 | (5) |
|
|
|
|
|
|
|
Dynamic Mechanical Properties of Polymer-Lining and Their Effect on Coefficient of Friction |
|
|
947 | (2) |
|
|
|
|
|
|
|
Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach |
|
|
949 | (8) |
|
|
|
|
|
|
|
|
|
Study on Condition Characteristics of Tribo-System and Its Description Method |
|
|
957 | (4) |
|
|
|
|
|
|
|
|
|
Study of Tribological Faults and Their Prevention Approaches in Dredger |
|
|
961 | (6) |
|
|
|
|
|
|
|
|
|
Elastohydrodynamic Lubrication and Asperity Contact Simulation of Engine Main Bearing with Flexible Rotating Crankshaft and Flexible Engine Block |
|
|
967 | (6) |
|
|
|
|
|
|
|
|
|
Tribology Extenics Condition Evaluation Based on Case Reasoning |
|
|
973 | (4) |
|
|
|
|
|
|
|
|
|
Effect of Surface Material on the Cavitation Erosion Noise: Experimental Investigation |
|
|
977 | (3) |
|
|
|
|
|
|
|
|
|
Research on Mechanism of Casing Wear in Sliding-Impact Wear Condition |
|
|
980 | (3) |
|
|
|
|
|
|
|
|
|
Durability of Phosphorated Starch Based ER Fluid under Damper |
|
|
983 | (6) |
|
|
|
|
|
|
|
|
|
Effect of Different Atmosphere on Dry Friction Behavior of Steel Sliding against Brass at High Speed |
|
|
989 | (2) |
|
|
|
|
|
|
|
|
|
A Study on the Application of a Mineral Additive in Lubricating Oil for Cylinder Liner |
|
|
991 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Effect of Ingredients in Slurry Containing Alumina on Polishing of Hard Disk Substrate |
|
|
993 | (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Study on Dispersion Stability and Self-Repair Principle of Ultrafine-Tungsten Disulfide Particulates |
|
|
995 | (5) |
|
|
|
|
|
Research on Micro-Abrasion Performances of TiN Coating in Simulated Body Fluid |
|
|
1000 | (5) |
|
|
|
|
|
|
|
Micro-Abrasion-Corrosion of Ti6Al4V Alloy in Simulated Artificial Hip Joint Environments |
|
|
1005 | (6) |
|
|
|
|
|
|
|
Chemical-Mechanical Polishing of NiP Alloy for Hard Disk Drive Substrates |
|
|
1011 | (2) |
|
|
|
|
|
|
|
|
|
The Material Removal Rate of Metal Polishing Process |
|
|
1013 | (2) |
|
|
|
|
|
Tool Life Modelling for High-Speed Milling |
|
|
1015 | (2) |
|
|
|
|
|
Nano-Scratching-Induced Damages and Their Effect on Fracture Properties of a Single Crystal Sapphire |
|
|
1017 | (2) |
|
|
|
|
|
|
|
Interfacial Forces in Chemical-Mechanical Polishing (Invited) |
|
|
1019 | (1) |
|
|
|
|
|
Influence of Water on the Tribological Behavior of Collector Materials against Railway Contact Wires at High Sliding Speeds |
|
|
1020 | (5) |
|
|
|
|
|
|
|
|
| Index of Authors |
|
1025 | |
Lisainfo e-raamatute kohta