Papers Presented.- A-1 High Energy Liquid Propellants for Rockets.- A-2
Hydrocarbon-Oxygen Systems Solubility.- A-3 Compatibility of Materials with
Liquid Oxygen.- A-4 Thermodynamic Properties of Neon.- A-5 Magnetic Losses at
Low Temperatures.- B-1 Wear and Friction in Liquid Nitrogen with Austenitic
Stainless Steel Having Various Surface Coatings.- B-2 The Stability of
Austenitic Stainless Steels at Low Temperatures as Determined by Magnetic
Measurements.- B-3 The Tensile and Impact Strength of Annealed and Welded
5086 Aluminum Down to 20°K.- B-4 Mechanical Testing of Aluminum Weldments.-
B-5 Bonding Plastic to Metal for High Strength at Low Temperatures.- B-6
Mechanical Properties of Insulating Plastic Foams at Low Temperatures.- C-1
The Performance of Glass Fiber Insulation under High Vacuum.- C-2 High
Performance Cryogenic Containers.- C-3 Ultra Low Temperature Production and
Control in Environmental Testing and Application Facilities.- C-4 An Airborne
Cryogenic System for Pneumatic Power Generation, Cooling, and Other Uses.-
C-5 Cryogenic Systems as Auxiliary Power Sources for Aircraft and Missile
Applications.- C-6 A Liquid Air Device for Cooling the Wearer of a Totally
Enclosed Liquid Rocket Propellant Handlers Suit.- D-1 A New Method for
Detecting Cavitation and Turbulence in Cryogenic Fluids.- D-2 Design Study of
Liquid Oxygen Pumping Systems for Missile Fueling Incorporating Vented
Storage Tanks.- D-3 High Pressure Pumping Equipment for Cryogenic Liquids.-
D-4 Pumping of Liquid Hydrogen.- D-5 Comparison and Correlation of
Centrifugal Pump Caviatation Test Results Handling Liquid Oxygen and Water.-
D-6 An Analysis of Dual-Phase Flow at the Inlet to a Centrifugal Cryogenic
Pump.- E-1 Measurement of the Flow of Liquefied Gases with Sharp-Edged
Orifices.- E-2Flow Conversion Kinetics of Ortho and Parahydrogen.- E-3
Poisoning and Reactivation of Ortho-Parahydrogen Conversion Catalyst.- E-4
Atmospheric Heat Transfer to Vertical Tanks Filled with Liquid Oxygen.- E-5
Hydrogen SeparationA Compromise with Reversibility.- F-1 A Vacuum Insulated
Transfer Line for Liquefied Gases.- F-2 Economic and Design Considerations
for a 650 Foot High Vacuum Insulated Transfer Line.- F-3 Pressurized Transfer
of Cryogenic Liquids.- F-4 Prediction of Pressure Drop in Two-Phase
Single-Component Fluid Flow.- F-5 Pressurized Cooldown of Cryogenic Transfer
Lines.- F-6 Pressurized Discharge of Liquid Nitrogen from an Uninsulated
Tank.- F-7 Ultrasonic Gaging of Cryogenic Liquids.- G-1 Some Methods for
Reducing Heat Leak Through Support Members in Liquefied Gas Storage Vessels.-
G-2 Performance of a Piston-Expanded Bubble Chamber.- G-3 Cryogenic Approach
to Localized Cooling of Infrared Detectors.- G-4 Analytical Methods for
Liquid Oxygen.- G-5 Methods of Gaging Liquid Oxygen.- G-6 Applications and
Economics of the Norelco Gas Liquefier for Recovery of Flash Gases.- H-1
Pilot Plant Studies of the Low Temperature Distillation of Hydrogen
Isotopes.- H-2 Testing and Operation of Ball Bearings Submerged in Liquefied
Gases.- H-3 Wide-Range Cryostat Temperature Control.- Author Index.
Lisainfo e-raamatute kohta