E-raamat: Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies: An EPD Symposium in Honor of Professor Ramana G. Reddy

Part 1: Plenary Session.- Applications of Process Engineering Principles
in Materials Processing, Energy and Environmental Technologies-Contributions
of Professor Ramana Reddy.- Status of the Development of a Novel Flash
Ironmaking Technology.- Innovations and Insights in Fluid Flow and Slime
Adhesion for Improved Copper Electrorefining.- Molten Flux Design for Solid
Oxide Membrane-Based Electrolysis of Aluminum from Alumina.- Effect of Slag
Phase on Mixing and Mass Transfer in a Model Creusot Loire Uddeholm (CLU)
Converter.- Part 2: Electrometallurgy.- Modeling of Aluminum Electrowinning
in Ionic Liquid Electrolytes.- Electrochemical Processing of Rare Earth
Alloys.- Effect of Cobalt Concentration on the Potential for Oxygen Evolution
from Pb-Ca-Sn Anodes in Synthetic Copper Electrowinning Electrolytes.- Cobalt
electrodeposition from cobalt chloride using urea and choline chloride ionic
liquid: Effect of temperature, applied Voltage, and cobalt chloride
concentration on current efficiency and energy consumption.- METTOP-BRX
Technology Eliminating Concerns and Highlighting Potentials of the Concept
of Tankhouse Optimization.- Mathematical Modeling of Molten Salt Electrolytic
Cells for Sodium and Lithium Production.- Part 3: Hydrometallurgy.- P-CAC, A
Unique Separation Technology for PGM Recovery.- The Physical Characteristics
of Electrorefined Copper Starter Sheet Material.- Extraction of Copper from
Sulfate-Chloride Solutions by Using Hydroxyoxime Extractants.-
Hydrometallurgical Processes for the Recovery of Rare Earths, Nickel and
Cobalt in Chloride Medium.- A Cr6+-Free Extraction of Chromium Oxide from
Chromite Ores using Carbothermic Reduction in the Presence of Alkali.- Part
4: Pyrometallurgy I.- Market Dynamics, Recycling and Recovery of Magnesium
and Its Alloy from Scrap.- Alternative ways of Using Nonferrous Slags as Feed
Material in the Ferrous Production Industry.- Insulating or Conductive
Refractory Lining Designs for Electric Furnace Smelting?.- The influence of
phosphorous additions on phase evolution in molten coal slag.- The Recovery
of Copper From Smelting Slag by Flotation Process.- Reaction Mechanisms in
the Silicothermic Production of Magnesium.- Influences of CaO/SiO2/MgO/Al2O3
on the Formation Behavior of FeO-bearing Primary-slags in Blast Furnace.-
Desulfurization of high sulfur coal leached with H2O2 and NaOH by microwave
irradiation.- Part 5: Pyrometallurgy II.- Chloridizing Roasting of
Bismuthinite with Sodium Chloride-Oxygen.- Natural Gas Utilization in Blast
Furnace Ironmaking: Tuyčre Injection, Shaft Injection and Prereduction.-
Selective Sulfation Roasting of Rare Earths from NdFeB Magnet Scrap.- Gold
solubility in smelting slags for the recycling of industrial and mining
wastes.- Solid State Reduction Behavior of Iron, Chromium and Manganese Oxide
Ores with Methane.- Stibnite chloridizing with calcium chloride-oxygen at
roasting temperatures.- Investigations on Rotary Tool Near-dry Electric
Discharge Machining.- Dependence of Ti2O3 and Temperatures on Electrical
Conductivity of TiO2-FeO-Ti2O3 slags.- Part 6: Materials Processing and
Plasma Processing.- PTA Cladding for Wear Application.- Production of
SiMn-alloys by natural gas and Carbon black.- Effect of Flux Ratio on the
Products of Self Propagating High Temperature Synthesis-Casting in WO3-Si-Al
System.- Synthesis of Chrysin Based Cationic Lipids: Plasmid Delivery and
Transgene Expression.- Part 7: Energy Storage and Engineering Issues.-
Corrosion Mechanism of Haynes 230 with Ni Crucible in MgCl2-KCl.-
Conceptualization of doped Black P thin films for potential use in
photovoltaics with validation from first principle calculations.- Energy
Efficiency and Sustainability in Steel Production.- Application of Surface
Effect on Metallurgical Processes.- Part 8: Modeling and Simulation.- Metal
Silicides for High-Temperature Thermoelectric Application.- CFD Modeling of
Slag-Metal Reactions and Sulfur Refining Evolution in an Argon Gas-Stirred
Ladle Furnace.- Numerical Study of the Fluid Flow and Temperature
Distribution in DC non-transferred Arc Thermal Plasma Reactor.- Part 9:
Thermodynamics and Kinetics.- Thermodynamic Studies on the Mg-B System using
Solid State Electrochemical Cells.- An Investigation on the Kinetics and
Mechanism of Alkali Reduction of Mine Waste containing Titaniferous Minerals
for the Recovery of Metals.- Empirical Activation Energies of MnO and SiO2
Reduction In SiMn Slags between 1500 and 1650°C.- Experimental evaluation of
thermodynamic interactions between tellurium and various elements in molten
iron.- Thermodynamics of simultaneous desulfurization and dephosphorizaion of
SiMn alloy.- Isothermal Reduction Behavior of CaO-Fe2O3-8wt%SiO2 System at
1123K, 1173K and 1223K with CON2 Gas Mixtures.- A Review of Some Studies on
Impurity Capacity Predictions in Molten Melts.- Part 10: Poster Session.-
Application of Sharp Analysis on Reduction Kinetics of Vanadium Titanium
Magnetite Sintering Ore.- High Temperature Properties of Molten Nitrate Salt
for Solar Thermal Energy Storage Application.- Influence of diluents dosage
on the performance of high solid Anti-corrosion Coating by Converter Dust.-
Permselectivity study of ion-exchange membranes in the presence of Cu-HEDP
complexes from a copper plating wastewater treatment.- Treatment of Blast
Furnace Gas Washing Water by Utilization of Coagulation Associated with
Microwave. 

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.