E-raamat: Nondestructive Testing of Materials and Structures

Committee Membership.- Supporting Institutions and Sponsors.- Preface,
by Oral Büyüköztürk and Mehmet Ali Tademir.- Dedication.- PART I:
1. NDT
Methods for the Characterization of Materials and Structures Evolution of NDT
Methods for Structures and Materials: Some Successes and Failures (Keynote
paper), by C.U. Grosse.- Remote Detection of Debonding in FRP-strengthened
Concrete Structures using Acoustic-Laser Technique, by O. Büyüköztürk, R.
Haupt, C. Tuakta and J. Chen.- A Quantitative Laser Ultrasound Visualization
System for Investigating the Interaction of Wedge Waves with a Defect, by
I.H. Liu and C.H. Yang.- NDT of Structural Timber Members by means of 3D
Ultrasonic Imaging Techniques and Modelling, by M. Krause, P.K. Chinta, K.
Mayer, U.A. Effner, S. Müller.- Enhancing the Accuracy of Off-Axis Flaw
Sizing and Positioning in TOFD D-scans using Mode-Converted Waves, by A.
Al-Ataby and W. Al-Nuaimy.- Time Reverse Modeling versus Automatic Onset
Detection: A Study on the Localization of Acoustic Emissions in Reinforced
Concrete, by  G.K. Kocur, E.H. Saenger and T. Vogel.- Use of Acoustic
Emission Analysis to Evaluate the Self-Healing Capability of Concrete, by K.
Van Tittelboom, N. De Belie, F. Lehmann and C.U. Grosse.- Identification of
Tendon Ducts in Prestressed Concrete Beam by SIBIE, by M. Yamada, K. Tagomori
and M. Ohtsu.- Absolute Calibration of an Acoustic Emission Sensor, by G.C.
Mclaskey and S.D. Glaser.- NDE with Lockin-Interferometry: Principle and
Applications, by G. Busse and P. Menner.- Fast Defect Shape Reconstruction
based on the Travel Time in Pulse Thermography, by S. Götschel, M. Weiser, C.
Maierhofer, R. Richter and M. Röllig.- The Role of Infrared Thermography in
NDT, by C. Meola and G.M. Carlomagno.- Industrial Applications of Dual X-ray
Energy Computed Tomography (2X-CT), by T. Fuchs, P. Keßling, M. Firsching, F.
Nachtrab, G. Scholz.- Research on Improvement of Receiving-Detecting Circuit
for DigitalRadiographic Systems with Advanced Spatial Resolution, by V.D.
Ryzhikov, O.D. Opolonin, O.K. Lysetska, S.M. Galkin, Y.F. Voronkin and V.L.
Perevertaylo.- Novel Approach for Non-Destructive Evaluation of
Electrochemical Potentials in Reinforced Concrete Structures, by K. Reichling
and M. Raupach.- Non Destructive Monitoring of Fiber Dispersion and
Flow-Induced

Orientation in Self-Compacting SFRC: A Method based on Magnetic Properties,
by

L. Ferrara, M. Faifer, M. Muhaxheri, S. Toscani and R. Ottoboni.- Mobile NMR
A Powerful Tool to Measure Coating Thicknesses in Concrete Buildings, by J.
Orlowsky.- Innovative Sensor Technologies for Nondestructive Imaging of
Concrete Structures: Novel Tools utilising Radar and Induction Technologies,
by S. Korl, C. Wuersch and J. Zanona.- Comparative Study of Nonlinear
Resonance and Wave Interaction Techniques for Concrete Damage Assessment, by
Y. Boukari, P. Rivard, D. Bulteel, G. Ballivy and N.E. Abriak;

Ultrasonic Signal Processing based on the combined use of Empirical Mode

Decomposition and Split Spectrum Processing using the Prism Technique, by S.
Haddad, M. Grimes, T. Benkedidah and A. Bouhadjera.- Advancing the Rebound
Hammer Method: A new Concrete Test Hammer, by D. Corbett.- Phenomena
Investigation of Guided Waves Propagation in a Multiple-Wire Cable with
Gradually Increasing Cut Depths, by

R. Mijarez and A. Baltazar.- Use of Acoustic Emission Method for Detection of
Two-Phase Flow in Service Open Type Water Pipeline, by T. Suzuki, T. Naka and
M. Ohtsu.- Acoustic Emission Diagnostics of Roller Bearings Damage, by P.
Mazal, F. Hort and F. Vlasic.-

Wireless Sensors for Measuring Wind-Borne Pressures during Hurricanes, by
J.-P. Pinelli, C. Subramanian, I. Kostanic, G. Lapilli and J. Chandiramani.-
Overview of Fiber Optic Sensors for NDT Applications, by A. Méndez and A.
Csipkes.-
2. NDT for Material and Property Characterization Evaluation of
ConcreteProperties by Combining NDT Methods, by

J.P. Balayssac, S. Laurens, D. Breysse and V. Garnier.- Thermography and
Ultrasound for Characterizing Subsurface Defects in Concrete, by E.Z.
Kordatos, D.V. Soulioti, M. Strantza, T.E. Matikas and D.G. Aggelis.-
Determination of the Frequency Dependent Dynamic Modulus for Asphalt Concrete
Beams using Resonant Acoustic Spectroscopy, by

A. Gudmarsson, N. Ryden and B. Birgisson.- Assessment of Fire Damaged
Concrete via the Hammer-Drill Pulse Transmission Technique, by R. Felicetti.-
Assessment of the Residual Strength of Fire-Damaged Steel-Rebars, by R.
Felicetti and P.G. Gambarova.- Damage Assessment by Ultrasonic Images in
Concrete subjected to Freeze-Thaw Cycles, by M. Molero, G. Al-Assadi, S.
Aparicio, M.J. Casati and M.G. Hernįndez.- Evaluation of Temperature
Influence on Ultrasound Velocity in Concrete by Coda Wave Interferometry, by


C. Wunderlich and E. Niederleithinger.- Monitoring the Stress Level of
Concrete Structures with CODA Wave Interferometry: Experimental Illustration
of an Investigated Zone, by

Y. Zhang, O. Abraham, A. Le Duff, B. Lascoup, V. Tournat, E. Larose,

T. Planes, R. El Guerjouma and O. Durand.- Non-Destructive Measurement of
Steel Fiber Dosage and Orientation in Concrete, by H-J. Wichmann, H.
Budelmann and A. Holst;

Application of an Electromagnetic Method for Evaluation of Chlorine
Distribution in Concrete, by J. Nojima, M. Arai and T. Mizobuchi.- A Study on
the Variability of Electrical Resistivity of Concrete, by J-F. Lataste and D.
Breysse.- Factors Affecting the Electrical Resistivity of Concrete, by O.
Sengul.- A Study of the Parameters that Affect the Measurements of
Superficial Electrical Resistivity of Concrete, by J.W. Lencioni and M.G. de
Lima.- Non-Stationary Identification of Thermal Characteristics of Building
Materials, by

J. Vala and S. astnķk.- Quantitative Evaluation of Thermal Diffusivity and
Thicknessof

Mortar Cover using Induction Thermography, by T. Du, F. Brachelet, D. Defer
and E. Antczak.- Three NDT Methods for the Assessment of the Concrete
Permeability as a Measure of Durability, by J. Adįmek, V. Jurankovį, Z.
Kadlecovį and M. Stehlķk.- Use of Dynamic Modulus of Elasticity to Assess the
Durability of Self Consolidating Concrete, by

N.G. Özerkan and .Ö. Yaman.- Effect of Concrete Mixtures on Estimation of
Porosity by

Ultrasonic Velocity, by A. Benouis and A. Grini.- Nondestructive Assessment
of Alkali-Silica Reaction in Concrete: A Review, by F. Moradi-Marani and P.
Rivard.- Homogeneity Detection of Fibre-Concrete Structures using
Radiographic Technique, by L. Hobst, O. Anton, J. Vodicka and J. Scucka.- Use
of Acoustic Emission Data Clustering to Identify Damage Mode in Concrete
Structures, by L. Calabrese, G. Campanella and E. Proverbio.- NDT of LWC with
Expanded Clay, by J. Brozovsky, D. Benes and J. Zach.- Evaluation of Rebound
Hammer Test as a Combined Procedure used with Drill Core Testing for
Evaluation of Existing Structures, by S. Yeilmen.- An Experimental Study on
the Evaluation of Concrete Test Results, by O. Arioz, K. Kilinc, M. Tuncan,
K. Ramyar and A. Tuncan.- Detection of Incipient Decay of Wood with Non- and
Minor-Destructive Testing Methods, by K. Frühwald, A. Hasenstab and K.
Osterloh.- Coupling AE Monitoring with Discrete Element Fracture Models, by
E.N. Nagy, W.G. Davids and E.N. Landis.- Use of High Resolution Digital
Images and NDT Imaging Techniques for Characterization of Timber Elements, by
M. Riggio, F. Prandi, R. De Amicis and M. Piazza.- Relative Effects of
Porosity and Grain Size on Ultrasonic Wave Propagation in Marbles, by V.
Özkan, .H. Sarpün and S. Tuncel.- Defect Detection in Porcelain Tiles using
Ultrasound, by E. Eren and S. Kurama.- Characterization of Synthetic Emeralds
Based on the Morphology of their Inclusions, by A. Mueller, U. Hassler and J.
Zaeh.- Can Proteoglycan Change inArticular Cartilage be Detected by
Ultrasound Evaluation?, by I. Afara, S. Wallace, S. Singh and A. Oloyede.-
Near infrared for Non-Destructive Testing of Articular Cartilage, by I.
Afara, T. Sahama and A. Oloyede.-
3. Early Age NDT of Concrete and Other
Materials Characterization of Fresh and Early Age Concrete using NDT (Keynote
paper), by H.W. Reinhardt.- Factors affecting the Monitoring of the Early
Setting of Concrete by Ultrasonic P-Waves, by N. Robeyst, C.U. Grosse and N.
De Belie.- Automated Shear-Wave Techniques to Investigate the Setting and
Hardening of Concrete in Through-Transmission, by M. Krüger, C.U. Grosse and
F. Lehmann.- Effects of Experimental Parameters in Monitoring the Hydration
of Cement Mortars by Ultrasonic Testing, by Ö. Kasap Keskin, .Ö. Yaman and
M. Tokyay.- Ultrasonic Monitoring of Capillary Porosity Evolution and
Strength Gain in Hydrating Cement Pastes, by K.V.L. Subramaniam.- Elasticity
Modulus Monitoring through an Ambient Vibration Response Method Application
to Cement-Based Pastes, by L. Maia, M. Azenha, R. Faria and J. Figueiras.-
Characterization of Fresh Mortar with Chemical Admixtures based on Stress
Wave Dispersion, by D.G. Aggelis and D. Grammenou.- Analysis of Thermal
Properties of Cement Paste during Setting and Hardening, by D. Mikuli, B.
Milovanovi and I. Gabrijel.- Application of Ultrasonic Method for
Determining Set Times of VMA Modified Cementitious Composites, by S.-T. Lin
and R. Huang.- The use of Wireless Sensor Networks to Monitor the Setting and
Hardening Processes of Self-Compacting Concrete, by S. Aparicio, J.V. Fuente,
J. Ranz, J. Aliques, M.A.G. Izquierdo and R. Fernįndez.- Early-Age Ultrasonic
Testing of Concrete and Shotcrete using Embedded Sensors, by A. Gibson and D.
Ciancio.- Continuous Monitoring of Setting and Hardening of Epoxy Resin, by
S. Grammatikos, D.G. Aggelis and A.S. Paipetis.-
4. NDT for Material
Characterization: Metallurgical Perspective Characterization of
SteelMicrostructures by Magnetic Barkhausen Noise Technique, by C.H. Gür.-
Magnetic NDE with Magnetic Yoke-Probe for Degradation and Mechanical
Properties of Steel, by H. Kikuchi, Y. Kamada, S. Kobayashi and K. Ara.-
Magnetic Inspection of Low-Carbon Steels Subjected to Plastic Deformations up
to Failure, by A.N. Stashkov, A.P. Nichipuruk, V.N. Kostin, M.K. Korkh and
S.A. Murikov.- Thermography and Acoustic Emission for Monitoring the Fracture
of Aluminium Plates, by E.Z. Kordatos, D.G. Aggelis and T.E. Matikas.-
Nonlinear Acoustic Effect due to Evolution of a Crack and Detection of
Micro-Scale Cracks in a Fatigue Process, by Y-M. Cheong.- New Ultrasonic
Methodology for Determining Temperature Gradient and Its Application to
Heated Materials Monitoring, by I. Ihara, M. Takahashi and H. Yamada.-
Inverse Problem for Material Analysis by Ultrasound, by F. Bettayeb and M.
Hakem.- Use of Acoustic Emission Signal and X-ray Diffraction Analysis for
Detection of Microstructural Changes in Cyclically Loaded AlMg Alloys, by P.
Mazal, P. Liskutin, F. Vlasic, F. Hort and J. Fiala.- Investigating Eddy
Current Response to Microstructural Changes to Determine Case Depth of
Induction Hardened Parts, by S. Kahrobaee and M. Kashefi Torbati.- Surface
Characterization of Carburized Steel by Eddy Current, by S. Kahrobaee, M.
Kashefi Torbati and M. Sheikh Amiri.-
5. NDT of Metals and Composites Guided
Waves for Nondestructive Testing Experiment and Analysis (Invited paper),
by T. Kundu.- Ultrasonic Guided Waves for Hidden Damage Detection in
Composite Structures: Theory and Experiments, by F. Ricci, E. Monaco, S.
Tancredi, L. Lecce, S. Banerjee and A.K. Mal.- Nonlinear Ultrasound: A Novel
Approach to Flaw Detection and Imaging, by I. Solodov, N. Krohn and G.
Busse.- Evaluation of Material Degradation of Composite Laminates using
Nonlinear Lamb Wave, by W. Li, Y. Cho, T. Ju, H.S. Choi, N. Kim and I. Park.-
New Opportunities in Ultrasonic Characterization of Stiffness Anisotropy
inComposite Materials, by I. Solodov, D. Döring, M. Rheinfurth and G. Busse.-
Plate Wave Propagation as Damage Indicator in FRP Composites under Fatigue
Loading, by T.T. Assimakopoulou and T.P. Philippidis.- Monitoring of Failure
of Composite Laminates using Acoustic Emission, by A.S. Paipetis, N.M.
Barkoula, M. Xyrafa, T.E. Matikas and D.G. Aggelis.- Acoustic Emission of
Failure in Fiber-Metal Laminates, by R. Kuznetsova, H. Ergun and B. Liaw.-
NDE using Lockin-Thermography: Principle and Recent Developments, by G.
Busse, A. Gleiter and C. Spiessberger.- Detection of Very Thin Defects in
Multi-Layer Composites made of Carbon Fibre with IR Thermography Methods, by
W. Swiderski.- A Comparison between Optimized Active Thermography and Digital
Shearography for Detection of Damage in Aerospace Composite Structures, by G.
De Angelis, M. Meo, D.P. Almond, S.G. Pickering and S.L. Angioni.- Analysis
of Laminar Fiber Composites with Computed Tomography using Shape-Fitted
Layers, by S. Mohr and U. Hassler.- Magnetic NDE using a Double Rectangular
Coil and a Hall Effect Sensor: A Simple Analysis, by L. Bettaieb, H. Kokabi
and M. Poloujadoff.- A Study of Microcracks and Delaminations in Composite
Laminates, by D.K. Hsu, V. Dayal, M. Gerken, A. Subramanian, K-H. Im and D.J.
Barnard.- Robotic High-Speed 3D Scanner Automatically Scans Spacecraft Heat
Shields, by J.P. Lavelle and J.W. Steele.- Inspection of Underwater Metallic
Plates by means of Laser Ultrasound, by P. Rizzo, E. Pistone, P. Werntges, J.
Han and X. Ni.- Influence of Water Flow through Pipe Networks for Damage
Detection using Guided Waves, by R. Ahmad and T. Kundu.- Monitoring Hydrogen
Release from 4140 Steel using the LCR Ultrasonic Technique, by D.E. Bray and
R.B. Griffin.-
6. Theoretical Modeling and Simulation Studies as a basis for
NDT Modelling of Radiographic Inspections, by A. Schumm, P. Duvauchelle, V.
Kaftandjian, R. Jaenisch, C. Bellon, J. Tabary, F. Mathy and S. Legoupil.-
Microwave Imaging of Plain andReinforced Concrete for NDT using
Backpropagation Algorithm, by O. Güne and O. Büyüköztürk.- Accuracy of
Potential Mapping Assessed through Numerical Models, by S. Kessler and C.
Gehlen.- Model-Assisted Non-destructive Monitoring of Reinforcement Corrosion
in Concrete Structures, by P. Marinier and O.B. Isgor.- Estimation of
Pre-stress in Tendons using Elastic Wave Propagation in the Anchor Head, by
D.G. Aggelis, D. Kleitsa, K. Kawai and T. Shiotani.- Modeling of Ultrasonic
Signals Received by a Focused Circular Transducer from a Side-Drilled Hole,
by F. Honarvar, M.D. Khameneh, A. Yaghootian and M. Zeighami.- A Theoretical
Study on Scattering of Surface Waves by a Cavity using the Reciprocity
Theorem, by H. Phan, Y. Cho and J.D. Achenbach.- Half-Space Dynamic Stiffness
Models Compatible with the Thin Layer Formulation for use in Response
Analysis of Soil Profiles, by M.A. Ceballos and C.A. Prato.- PART II:
7. NDT
of Civil Infrastructures Automated NDE of Structures with Combined Methods
(Keynote paper), by H. Wiggenhauser.- State of Art Image-Based Inspection
Methods used on Japanese Expressways, by S. Shimeno, T. Saeki, T. Kazato and
T. Sakuraba.- Use of NDT in Condition Assessment of RC Buildings, by A.A.
Ozbora, N.U. Basar, Y. Akkaya and M.A. Tasdemir.- NDT Methods for the
Assessment of Concrete Structures after Fire Exposure, by E. Annerel and L.
Taerwe.- Damage and Defect Detection through Infrared Thermography of Fiber
Composites Applications for Strengthening of Structural Elements, by L.
Cantini, M. Cucchi, G. Fava and C. Poggi.- Thermographic Investigation of
Delaminated Plaster on Concrete, by R. Krankenhagen, C. Maierhofer and M.
Röllig.- Multi Layer Microwave Moisture Scans at Large Areas in Civil
Engineering, by A. Göller.- Holographic Subsurface Radar as a Device for NDT
of Construction Materials and Structures, by S.I. Ivashov, V.V. Razevig, I.A.
Vasiliev, A.V. Zhuravlev,T. Bechtel, L. Capineri, P. Falorni and T. Lu.-
Infrared Imaging ofRoof Systems for Moisture Detection, by J.S. Al-Qazweeni
and H.A. Kamal.- Ultrasonic-Echo and Impulse Radar in the Practical
Application of an Engineering Firm, by C. Sodeikat.- Non-Destructive Testing
of Bosphorus Bridges, by Y. Dost, N. Apaydn, E. Dedeolu, D.K. MacKenzie and
O.Z. Akkol.- Non-Destructive Evaluation for Horizontal Cracks in RC Slabs of
Highway Bridges Based on Analysis-Aided Impact Elastic-Wave Methods, by S.
Uchida, T. Kamada, T. Iwasaki and H. Tsunoda.- Non-Destructive Testing of
FRP-Structural Systems Applied to Concrete Bridges, by K.C. Crawford.-
Inspection of Timber Bridges with Ultrasonic Echo Technique, by A. Hasenstab
and K. Frühwald.- Acoustic Emission Monitoring of Conventionally Reinforced
Concrete Highway Bridges under Service Conditions, by T. Schumacher, C.
Higgins and S.C. Lovejoy.- Review of NDT Assessment of Road Pavements Using
GPR, by C. Plati, K. Georgouli and A. Loizos.- Condition Assessment of Mixed
Paved Roads by GPR and CCR: Material properties, by C. Kaouane and M.
Chouteau.- Portable Wireless High Power Air-coupled GPR System for Highway
Inspection, by W. Ren, H. Wang and C. Liu.- Feasibility of Detecting
Debonding of Hot Mix Asphalt Layer with Nondestructive Testing, by M. Celaya,
F.S. Ertem, S. Nazarian and M. Saltan.- Applicability of Estimation of
Chloride Content in Cover Concrete of Coastal Reinforced Concrete Structures
using Electromagnetic Wave, by T. Mizobuchi, K.Yokozeki and R. Ashizawa.-
In-Service Inspection and Structural Integrity Assessment of Atmospheric
Storage Tanks, by A.A. Anastasopoulos, S.E. Kattis and D.A. Kourousis.-
Application of Acoustic Emission to High-Voltage Electric Power Equipment
Diagnostics, by O.G. Santos Filho, F.S. Brasil, F.F. Silva Neto, R.C. Leite
and S.L. Zaghetto.- A De-Noising Algorithm for EMAT on Wheels, by K. Yang, C.
Peng, Y. Zhang, J. Peng and X. Gao.-
8. Geotechnical and Geophysical
Applications of NDT Impact Echo Q-Factor Measurements towards Non-Destructive
QualityControl of the Backfill in Segmental Lined Tunnels, by N. Ryden, O.
Aurell, P. Nilsson and J. Hartlén.- Monitoring DC Stray Current Corrosion at
Sheet Pile Structures, by W.H.A. Peelen, E.A.C. Neeft, G. Leegwater, W. van
Kanten-Roos and W.M.G. Courage.- Inspection of Deteriorated Coastal
Embankments using Radar, Thermography, and Impact-Echo, by C.-H. Chiang,
C.-C. Cheng and K.-T. Hsu.- Laboratory Characterization of Mining Cemented
Rockfill by NDT Methods: Experimental Set-up and Testing, by C.L. Chou, M.
Chouteau and M. Benzaazoua.- A Case Study of the Self-Potential Method to
Characterize Seepage and Earth Dam Materials, by L.A. Nzumotcha Tchoumkam, M.
Chouteau, B. Giroux, P. Rivard, K. Saleh and A. Cōté.- Microgravity
Application for Detection of Underground Cavities in a Desert Karst Terrain,
by H.A. Kamal, M.F. Taha and S.A. Al-Sanad.-
9. Health Monitoring of
Structures.- 20 Years of Experience with Structural Health Monitoring of
Objects with CFRP Components (Keynote paper), by U. Meier, R. Brönnimann, P.
Anderegg and G.P. Terrasi.- Review of a Null Space Strategy for Damage
Localization (Invited paper), by D. Bernal.- Embedded NDT with Piezoelectric
Wafer Active Sensors, by V. Giurgiutiu.- Rapid Identification of Critical
Structural Components to Inspect or Monitor after an Extreme Event, by D.
Saydam and D.M. Frangopol.- A Fast Automated Impact Hammer Test Method for
Modal Parameter Extraction: Implementation on a Composite Bridge Beam, by D.
Tirelli and I. Vadillo.- Case Studies of Structural Health Monitoring of
Bridges, by I. Harik and A. Peiris.- Long-term Data Intensive Wireless
Structural Monitoring: Three Years of Experiences on the Stork Bridge, by G.
Feltrin, O. Saukh, R. Bischoff and J. Meyer.- Identification of Structural
Changes on a Movable Bridge, by F.N. Catbas, M. Gul and H.B. Gokce.-
Experiences with Real-Life Fiber Optic Bridge Monitoring Installations, by T.
Graver, A. Mendez and K. Chandler.- Wireless Long-Term Monitoring of
AsphaltLayer on a Motorway Bridge and Comparative Testing of Displacement, by
S.A. Bachmaier, A. Gordt, S. Jungmann and M. Krüger.- Eigenvector
Normalization from Mass Perturbations: A Review, by D. Bernal.- Health
Monitoring of a Benchmark Structure using Vibration Data, by B. Gunes.-
Applying Alternative Identification Methods in Eccentric Mass Shaker
Experiments, by U. Karacadal and H. Lu.- Cost-Effective Dynamic Structural
Health Monitoring with a Compact and Autonomous Wireless Sensor System, by F.
Bastianini, S. Sedigh, G. Pascale and G. Perri.- Preliminary Identification
of Dynamic Characteristics of a Unique Building in Chile following 27
February 2010 (Mw=8.8) Earthquake, by M. Ēelebi, M. Sereci, R. Boroschek, R.
Carreńo and P. Bonelli.- Behaviour of Corrosion Damaged Reinforced Concrete
Beams Strengthened using CFRP Laminates, by M. Tigeli, P. Moyo and H.
Beushausen.-
10. NDT and Evaluation of Historic Buildings and Monuments.-
Diagnosis of Historic Masonry Structures using Non-Destructive Techniques
(Invited paper), by L. Binda, L. Cantini and C. Tedeschi.- Monitoring of Salt
Content in Mineral Materials using Wireless Sensor Networks, by J. Frick, F.
Lehmann, K. Menzel, H. Pakdel and M. Krüger.- Development and Application of
Active Thermography for Monitoring of Deterioration Processes of Historic
Structures, by C. Maierhofer, R. Krankenhagen, M. Röllig, U. Kalisch and J.
Meinhardt.- GPR Spectral Decomposition to Monitor Cracks in a Historic
Building, by L. Orlando.- Using an Ultrasonic Echo Technique to Inspect the
Structure of a Pumice Brick Vault in a Church, by A. Hasenstab, G. Hilbert
and K. Frühwald.- Acoustic Emission as a Non-Destructive Method for Tracing
Damage: From Laboratory Testing to Monitoring Historic Structures, by M.
Strojecki, M. ukomski, C. Colla and E. Gabrielli.- Thermographic
Investigation of leccese Stone Masonry Structures, by A. Largo and R.
Angiuli.- Non Invasive Measurements of Moisture in Full-Scale Stone andBrick
Masonry Models after Simulated Flooding: Effectiveness of GPR, by G. Cardani,
L. Cantini, S. Munda, L. Zanzi and L. Binda.- Damp and Salt Rising in Damaged
Masonry Structures: Numerical Modelling and NDT Monitoring, by C. Colla, L.
Molari, E. Gabrielli and S. de Miranda.- Simulation and Test Procedures to
correlate Structural Damage with Moisture and Salts Migration in Masonry, by
C. Colla, P. Baldracchi, A. Troi, F. Ubertini and R. Carli.- Wireless
Monitoring of Moisture Content in Mineral Materials by Electrical Impedance
Measurements, by F. Lehmann, J. Frick, M. Krüger and K. Menzel.-
Determination of Mechanical Properties of Natural Stone and Brick Elements in
Masonry Heritage Buildings, by A.M. Grmescu, S. Gelmambet, M. Drgoi and
B.D. Pericleanu.- Mobile UV-VIS Absorption Spectrometry Investigations in the
Alexander-Sarcophagus in Istanbul, by H. Piening.- Structural Monitoring
and Investigation Campaign in the Church of St. Giuseppe dei Minimi in
LAquila, after the 6th of April 2009 Earthquake, by F. Casarin, M. Dalla
Benetta, C. Modena, F. da Porto, M.R. Valluzzi, L. Cantini, C. Tedeschi and
P. Condoleo.- Investigation Methodology Applied to the Structure of the
Church of St. Biagio in LAquila, by L. Cantini, P. Condoleo, S. Munda, C.
Tedeschi, C. Tiraboschi, F. Casarin, E. Simonato and L. Binda.- Use of
Thermovision for the Survey of a Timber Vault in Torino, by L. Cantini, C.
Tedeschi, C. Tiraboschi and L. Binda.- Wireless Monitoring of Heritage
Structures Selected Case Studies, by S.A. Bachmaier and M. Krüger.-
11. NDT
Planning, Practice, Reliability, Codes and Standards.- Differences in
International Strategy for the NDT of Concrete (Keynote paper), by M.C.
Forde.- NDT Planning for Fatigue Sensitive Structures under Uncertainty, by
D.M. Frangopol and S. Kim.- A Proposal for Reliability Improvement of
Non-Destructive Evaluation Technology for Concrete, by T. Kamada, M. Iwanami,
T. Shiotani, Y. Oshima and S. Uchida.- Data Fusionto Improve the Concrete
Diagnosis, by V. Garnier, M.A. Ploix and D. Breysse.- Approach for the
Life-Cycle Management of Structures including Durability Analysis, SHM and
Maintenance Planning, by P. Furtner and R. Veit-Egerer.- A New Crane System
for Remote Inspection and NDT 1139, by R. Drewello, N. Wetter, B. Beckett and
N. Beckett Integration of NDT in Rapid Screening of Concrete Structures, by
S. Sundar Kumar, B.H. Bharatkumar, G. Ramesh and T.S. Krishnamoorthy.- Author
Index.- Subject Index.