| Preface |
|
xi | |
|
|
|
xv | |
|
1 Introduction to Welding Mechanics |
|
|
|
1.1 Basic Concepts of Welding and Welding Mechanics |
|
|
1 | (7) |
|
1.2 Process of the Production of Residual Stress and Inherent Strain |
|
|
8 | (19) |
|
|
|
8 | (4) |
|
1.2.2 Heating of Free Bar C |
|
|
12 | (1) |
|
1.2.3 Heating of Bar C Fixed at Both Ends |
|
|
13 | (8) |
|
1.2.4 Heating Bar C When It Is Connected to a Movable Rigid Body |
|
|
21 | (6) |
|
1.3 Reproduction of Residual Stress by Inherent Strain and Inverse Analysis for Inherent Strain |
|
|
27 | (2) |
|
1.3.1 Reproduction of Residual Stress by Inherent Strain |
|
|
27 | (1) |
|
1.3.2 Inverse Analysis for Inherent Strain |
|
|
28 | (1) |
|
1.4 Numerical Examples of Residual Stress, Inherent Strain, and Inherent Displacement |
|
|
29 | (7) |
|
1.4.1 Low-Temperature Heating Process |
|
|
30 | (1) |
|
1.4.2 Medium-Temperature Heating |
|
|
31 | (2) |
|
1.4.3 High-Temperature Heating |
|
|
33 | (1) |
|
|
|
34 | (2) |
|
2 Introduction to Measurement and Prediction of Residual Stresses with the Help of Inherent Strains |
|
|
|
2.1 Inherent Strains and Resulting Stresses |
|
|
36 | (4) |
|
2.1.1 Displacement-Strain Relation (Compatibility) |
|
|
38 | (1) |
|
2.1.2 Stress-Strain Relation (Constitution Equation) |
|
|
39 | (1) |
|
2.1.3 Equilibrium Condition (Equilibrium Equation) |
|
|
39 | (1) |
|
2.2 Measured Strains in Experiments and Inherent Strains |
|
|
40 | (1) |
|
2.3 Effective and Noneffective Inherent Strains |
|
|
41 | (1) |
|
2.4 Determination of Effective Inherent Strains from Measured Residual Stresses |
|
|
42 | (3) |
|
2.5 Most Probable Value of Effective Inherent Strain and Accuracy of the Measurement of Residual Stress |
|
|
45 | (1) |
|
2.6 Derivation of Elastic Response Matrix |
|
|
46 | (2) |
|
2.7 Measuring Methods and Procedures of Residual Stresses in Two- and Three-Dimensional Models |
|
|
48 | (4) |
|
2.7.1 Measurement of Two-Dimensional Residual Stresses Induced in the Butt-Welded Joint of a Plate |
|
|
48 | (1) |
|
2.7.2 Measurement of Three-Dimensional Residual Stresses Induced in Thick Plates |
|
|
49 | (3) |
|
2.8 Prediction of Welding Residual Stresses |
|
|
52 | (3) |
|
|
|
52 | (3) |
|
3 Mechanical Simulation of Welding |
|
|
|
3.1 Heat Flow and Temperature During Welding |
|
|
55 | (24) |
|
3.1.1 Heat Supply, Diffusion, and Dissipation |
|
|
56 | (3) |
|
3.1.2 Simple Heat Flow Model |
|
|
59 | (4) |
|
3.1.3 Differences in Material Properties |
|
|
63 | (1) |
|
3.1.4 Change of Material Properties with Temperature |
|
|
64 | (5) |
|
3.1.5 Characteristic Temperature and Length |
|
|
69 | (5) |
|
3.1.6 Simple Method for Solving the Heat Conduction Problem |
|
|
74 | (5) |
|
|
|
79 | (1) |
|
3.2 Basic Concepts of Mechanical Problems in Welding |
|
|
79 | (20) |
|
3.2.1 Classification of Problems According to Dimensions |
|
|
80 | (1) |
|
3.2.2 Variables and Equations Used to Describe Mechanical Problems |
|
|
81 | (3) |
|
3.2.3 Deformation and Stress in the Three-Bar Model |
|
|
84 | (3) |
|
3.2.4 Stress-Strain Relation in Welding |
|
|
87 | (7) |
|
3.2.5 Thermal Visco-Elasto-Plastic Problem in Three-Bar Model |
|
|
94 | (2) |
|
|
|
96 | (1) |
|
|
|
97 | (2) |
|
4 The Finite Element Method |
|
|
|
4.1 Finite Element Method as a Powerful Tool for a Variety of Problems |
|
|
99 | (2) |
|
4.2 Types of Problems and the Corresponding Basic Equations |
|
|
101 | (2) |
|
4.3 Basic Concepts of the Variational Principle |
|
|
103 | (1) |
|
4.4 How to Solve a Problem with More than One Element |
|
|
104 | (4) |
|
4.4.1 Equilibrium Equation of a Bar |
|
|
104 | (1) |
|
4.4.2 Equilibrium Equations of Two Bars |
|
|
105 | (3) |
|
4.5 Incremental Method for Nonlinear Problems |
|
|
108 | (1) |
|
4.6 Simple Examples of Analyzing Thermal Elastic-Plastic-Creep Behavior |
|
|
109 | (6) |
|
4.6.1 Bar Fixed at Both Ends Under a Thermal Cycle |
|
|
109 | (3) |
|
4.6.2 Thermal Elastic Behavior of a Bar Fixed at Both Ends |
|
|
112 | (1) |
|
4.6.3 Thermal Elastic-Plastic Behavior of a Bar Fixed at Both Ends |
|
|
113 | (1) |
|
4.6.4 Thermal Elastic-Plastic Creep Behavior of a Bar Fixed at Both Ends |
|
|
114 | (1) |
|
4.7 Basic Theoretical Solutions to Validate Results Obtained by the FEM |
|
|
115 | (7) |
|
4.7.1 Temperature Distribution Due to a Concentrated Heat Source |
|
|
115 | (1) |
|
4.7.2 Temperature Distribution on a Butt-Welded Joint of a Thin Plate |
|
|
116 | (3) |
|
4.7.3 Temperature Distribution on a Butt-Welded Joint of a Thick Plate |
|
|
119 | (1) |
|
4.7.4 Inherent Strain Distribution on a Butt-Welded Joint of a Thin Plate |
|
|
120 | (2) |
|
4.8 Flow of Analysis for Welding Deformation and Residual Stress |
|
|
122 | (2) |
|
4.9 Checklist for Rational Simulation |
|
|
124 | (2) |
|
4.9.1 Checklist for Preparation of Input Data |
|
|
124 | (1) |
|
4.9.2 Checklists for the Results of Simulation |
|
|
125 | (1) |
|
4.10 Troubleshooting for Problems Experienced in Computation |
|
|
126 | (5) |
|
4.10.1 Troubleshooting for Common Problems in Heat Conduction Analysis and Stress Analysis |
|
|
126 | (1) |
|
4.10.2 Troubleshooting for Heat Conduction Analysis |
|
|
126 | (2) |
|
4.10.3 Troubleshooting for Thermal Elastic-Plastic Analysis |
|
|
128 | (1) |
|
|
|
129 | (2) |
|
|
|
|
5.1 Q&A for Program Introduction |
|
|
131 | (4) |
|
5.2 Q&A for Welding Heat Conduction Program heat2d.exe |
|
|
135 | (5) |
|
5.3 Q&A for Thermal Elastic-Plastic Creep Program tepc2d.exe |
|
|
140 | (2) |
|
5.4 Q&A for the Inherent Strain-Based Program inhs2d.exe |
|
|
142 | (2) |
|
5.5 Q&A for Postprocessing Program awsd.exe |
|
|
144 | (8) |
|
|
|
152 | (18) |
|
|
|
167 | (3) |
|
6 Simulation Procedures for Welding Heat Conduction, Welding Deformation, and Residual Stresses Using the FEM Programs Provided on the Companion Website |
|
|
|
6.1 Simulation Steps Using the Welding Heat Conduction FEM Program |
|
|
170 | (8) |
|
6.1.1 Purpose and Simulation Conditions |
|
|
170 | (1) |
|
6.1.2 Preparation of Input File |
|
|
171 | (5) |
|
6.1.3 Steps to Execute heat2d.exe for Welding Heat Conduction |
|
|
176 | (1) |
|
6.1.4 Viewing Results Using Postprocessing Program |
|
|
176 | (2) |
|
6.2 Simulation Steps Using the Thermal Elastic-Plastic Creep FEM Program |
|
|
178 | (10) |
|
6.2.1 Purpose and Simulation Conditions |
|
|
178 | (1) |
|
6.2.2 Preparation of Input File |
|
|
179 | (6) |
|
6.2.3 Prepare the Node Temperature File |
|
|
185 | (1) |
|
6.2.4 Steps to Execute the FEM Program |
|
|
185 | (1) |
|
6.2.5 Viewing Results Using the Postprocessing Program |
|
|
185 | (3) |
|
6.3 Simulation Steps Using the Inherent Strain FEM Program |
|
|
188 | (5) |
|
6.3.1 Purpose and Simulation Conditions |
|
|
188 | (1) |
|
6.3.2 Preparation of Input File |
|
|
189 | (3) |
|
6.3.3 Steps to Execute the Program |
|
|
192 | (1) |
|
6.3.4 Comparison of the Results of the Inherent Strain Method and the Thermal Elastic-Plastic Method |
|
|
192 | (1) |
|
6.4 Numerical Experiment for Residual Stress Measurement Using the Inherent Strain FEM Program |
|
|
193 | (7) |
|
6.4.1 Purpose and Simulation Conditions |
|
|
193 | (1) |
|
6.4.2 Preparation of Input File |
|
|
194 | (5) |
|
6.4.3 Steps to Execute the FEM Program for Residual Stress and Deformation |
|
|
199 | (1) |
|
6.4.4 Comparison of the Results of the Inherent Strain Method and the Thermal Elastic-Plastic Method |
|
|
199 | (1) |
|
6.5 Computation Steps for the Prediction of Residual Stresses by the Inherent Strain Method |
|
|
200 | (10) |
|
6.5.1 Purpose and Simulation Conditions |
|
|
200 | (1) |
|
6.5.2 Preparation of Input File and Prediction Formula of Inherent Strain |
|
|
200 | (6) |
|
6.5.3 Steps to Execute inhs2d.exe for Residual Stress Computation |
|
|
206 | (1) |
|
6.5.4 Comparison of the Results by the Inherent Strain Method and the Thermal Elastic-Plastic Method |
|
|
206 | (1) |
|
|
|
207 | (3) |
|
7 Strategic Simulation Analyses for Manufacturing Problems Related to Welding |
|
|
|
7.1 Cold Cracking at the First Pass of a Butt-Welded Joint Under Mechanical Restraint |
|
|
210 | (3) |
|
7.2 Cold Cracking of Slit Weld |
|
|
213 | (3) |
|
7.3 Analysis of Welding Residual Stress of Fillet Welds for Prevention of Fatigue Cracks |
|
|
216 | (5) |
|
7.3.1 Residual Stresses by Three-Dimensional Analysis |
|
|
216 | (1) |
|
7.3.2 Comparison of Residual Stresses by Two-Dimensional and Three-Dimensional Analyses |
|
|
216 | (3) |
|
7.3.3 Comparison of Residual Stresses in Single-Pass and Multipass Welds |
|
|
219 | (2) |
|
7.4 Multipass-Welded Corner Joints and Weld Cracking |
|
|
221 | (6) |
|
7.4.1 Experiment and Result |
|
|
221 | (1) |
|
7.4.2 Residual Stresses by Thermal Elastic-Plastic Analysis |
|
|
221 | (2) |
|
7.4.3 Effects of Welding Residual Stress and Geometry of Edge Preparation on Initiation of Welding Cracks |
|
|
223 | (4) |
|
7.5 Analysis of Transient and Residual Stresses of Multipass Welding of Thick Plates in Relation to Cold Cracks, Under-Bead Cracks, Etc |
|
|
227 | (4) |
|
7.5.1 Specimens and Conditions for Theoretical Analysis |
|
|
227 | (3) |
|
7.5.2 Characteristics of Welding Residual Stress Distributions and Production Process |
|
|
230 | (1) |
|
7.6 Improvement of Residual Stresses of a Circumferential Joint of a Pipe by Heat-Sink Welding |
|
|
231 | (4) |
|
7.7 Prediction of Deformation Produced by Line Heating |
|
|
235 | (1) |
|
7.8 Simulation of Resistance Spot Welding Process |
|
|
236 | (3) |
|
7.9 Prediction of Welding Distortion Produced in Large Plate Structures |
|
|
239 | (8) |
|
|
|
244 | (3) |
|
Appendix A Residual Stress Distributions in Typical Welded Joints |
|
|
247 | (36) |
|
A.1 Residual Stresses in Base Metals |
|
|
248 | (5) |
|
A.1.1 Residual Stress in Thermo-Mechanical Control Process (TMCP) Steel |
|
|
248 | (2) |
|
A.1.2 Residual Stress in TMCP Steel Induced by Bead Weld |
|
|
250 | (1) |
|
A.1.3 Explosive Clad Steel |
|
|
251 | (1) |
|
A.1.4 Cylindrical Thick Plate by Cold Bending |
|
|
252 | (1) |
|
A.2 Residual Stresses in Welded Joints of Plates; in 2-Dimensional |
|
|
253 | (10) |
|
A.2.1 Butt-Welded Joints; Classification of Patterns of Residual Stress Distributions |
|
|
253 | (3) |
|
A.2.2 Long Butt-Welded Joint, Prediction Equation |
|
|
256 | (1) |
|
A.2.3 Built-Up Members of T Shape and I Shape |
|
|
257 | (2) |
|
A.2.4 Built-Up Member of T Shape, Experiment |
|
|
259 | (1) |
|
A.2.5 Residual Stress and Inherent Displacement Induced by Slit Welds |
|
|
260 | (3) |
|
A.3 Mulltipass Butt Welds of Thick Plates; 3-Dimensional |
|
|
263 | (2) |
|
A.3.1 Multipass Butt Welds of Thick Plates, Classification |
|
|
263 | (1) |
|
A.3.2 Multipass Butt Welds of Thick Plate, Experiment |
|
|
264 | (1) |
|
A.4 Electron Beam Welding, Thick Plate |
|
|
265 | (2) |
|
A.5 First Bead of Butt Joint; RCC (Rigidly Restrained Cracking) Test Specimen |
|
|
267 | (1) |
|
A.6 Multipass-Welded Corner Joint |
|
|
268 | (1) |
|
A.7 Fillet Welds: 3-Dimensional |
|
|
269 | (2) |
|
A.7.1 Single Fillet Welds |
|
|
269 | (1) |
|
A.7.2 Fillet Welds at the Joint of Web and Flange |
|
|
270 | (1) |
|
A.8 Repair Weld of Thick Plate |
|
|
271 | (3) |
|
A.9 Circumferential Welded Joint of Pipes |
|
|
274 | (9) |
|
A.9.1 Circumferential Welded Joint of Pipes--Heat-Sink Welding |
|
|
274 | (5) |
|
A.9.2 Penetrating Pipe Joints in Nuclear Reactor |
|
|
279 | (2) |
|
|
|
281 | (2) |
|
Appendix B Published material properties for thermal elastic-plastic FEM analysis |
|
|
|
Appendix C Theory of three-dimensional thermal elastic-plastic creep analysis |
|
|
| Contents of Programs and Data on the Companion Website |
|
283 | (2) |
| Index |
|
285 | (6) |
| About the Authors |
|
291 | |
Lisainfo e-raamatute kohta